PRAKASH SARANGI | Microbiology | Best Researcher Award

Dr. PRAKASH SARANGI | Microbiology | Best Researcher Award

CENTRAL AGRICULTURAL UNIVERSITY, IMPHAL, INDIA.

Author Profile

Early Academic Pursuits 🎓

Dr. Prakash Kumar Sarangi’s academic journey reflects his unwavering dedication to the field of biotechnology and environmental sustainability. Born with a keen interest in natural sciences, he pursued his undergraduate studies in Botany, Chemistry, and Zoology at Utkal University in Bhubaneswar, India, in 1997. This early foundation laid the groundwork for his later focus on environmental biology and biotechnology. Dr. Sarangi continued to expand his knowledge by earning a Master’s degree in Botany with a specialization in Environmental Biology from Ravenshaw University in 1999. His growing interest in applied science led him to pursue an M.Tech in Agricultural Biotechnology from the prestigious Indian Institute of Technology (IIT), Kharagpur, in 2005, where he delved deeper into agricultural and environmental biotechnology.

Driven by a passion for applied research in microbial technology, Dr. Sarangi obtained his Ph.D. in Microbial Biotechnology from Ravenshaw University in 2011. His doctoral research was both interdisciplinary and focused on practical applications of microbial technology in environmental biotechnology, solidifying his expertise in the field of waste biomass utilization and microbial biodegradation.

Professional Endeavors 💼

Dr. Sarangi has amassed over a decade of experience in both academia and research, contributing significantly to the development of sustainable technologies. Since 2012, he has served as a Scientist Senior Scale in the Department of Microbial Biotechnology at the College of Agriculture, Central Agricultural University in Imphal, India. His role in this esteemed institution has allowed him to pursue cutting-edge research while mentoring the next generation of scientists. Dr. Sarangi’s academic career has also seen him take on teaching roles as a Visiting Faculty at various universities, including the Orissa University of Agriculture and Technology and MATS University. In addition, he was an Assistant Professor and Research Officer at the Rajkumar Academy of Bioinfotech & Research, Bhubaneswar, where he contributed to teaching and research in biotechnology.

Contributions and Research Focus 🔬

Dr. Prakash Kumar Sarangi’s research is primarily focused on environmental sustainability and the conversion of agro-industrial waste into valuable bioenergy and biomaterials. His work in bioprocess engineering, microbial catalytic systems, and microbial cellulose utilization has the potential to revolutionize how waste biomass is managed. He specializes in the microbial degradation of biomass, particularly lignocellulosic biomass, and the conversion of waste into second-generation biofuels and other bio-based products. His research aims to address the global challenges of waste disposal and the need for sustainable bioenergy solutions. Dr. Sarangi has made groundbreaking contributions in the areas of bioconversion technologies, which focus on transforming agricultural and industrial waste into valuable chemicals, biochemicals, and biomaterials. His innovative approach to waste-to-value technologies holds immense promise for both environmental remediation and sustainable production.

Dr. Sarangi has taken a leadership role as the principal investigator in various research and development projects on agro-industrial waste biomass conversion, biofuel production, and microbial biodegradation. His multidisciplinary approach combines principles from microbial biotechnology, biochemical engineering, and environmental sustainability, making his work a crucial part of the drive toward a circular economy.

Accolades and Recognition 🏆

Dr. Sarangi’s extensive body of work has earned him international recognition and respect in the fields of microbial biotechnology and environmental engineering. He has published over 100 research articles in peer-reviewed international journals and contributed to more than 60 book chapters. Additionally, his research has been included in over 70 conference proceedings, underscoring his impact within the scientific community. His contributions have extended beyond academic publishing, as he has authored 20 books with renowned publishers such as Springer Nature, CRC Press, Elsevier, and AAP. These publications serve as valuable resources for researchers, practitioners, and students, further cementing Dr. Sarangi’s position as a thought leader in the field.

Impact and Influence 🌍

Dr. Sarangi’s work has had a lasting impact on the scientific community and society. Through his research on waste biomass conversion and bioprocessing, he is helping to build a more sustainable future. His work has the potential to address critical environmental issues, such as waste management, pollution, and the depletion of natural resources. By developing innovative solutions for biofuel production and microbial biodegradation, Dr. Sarangi is not only contributing to the scientific understanding of these processes but also advancing practical applications that can benefit industries, communities, and ecosystems worldwide.

His efforts to promote sustainable practices in the biotechnology field have inspired numerous young researchers and academics. Through his teaching and mentorship, he has influenced the careers of many students who are now contributing to various aspects of biotechnology and environmental science.

Legacy and Future Contributions 🔮

Looking toward the future, Dr. Prakash Kumar Sarangi is committed to continuing his groundbreaking work in the field of microbial biotechnology. His ongoing research aims to develop even more efficient and sustainable processes for converting waste biomass into valuable resources, thus supporting global efforts to reduce waste, lower carbon emissions, and transition to renewable energy sources. With his expertise in bioprocess engineering and waste biomass utilization, Dr. Sarangi is poised to contribute significantly to the development of novel bio-based materials and chemicals, making a lasting impact on industries such as agriculture, energy, and environmental remediation.

Dr. Sarangi’s legacy lies in his innovative approach to sustainability, his dedication to teaching, and his ongoing contributions to the field of microbial biotechnology. His work not only addresses current environmental challenges but also provides a roadmap for future generations of scientists to follow in the pursuit of a more sustainable and environmentally responsible world.

In summary, Dr. Prakash Kumar Sarangi’s career has been marked by remarkable academic achievements, a deep commitment to sustainability, and a passion for advancing the field of microbial biotechnology. With his innovative research and dedication to solving environmental problems, Dr. Sarangi continues to shape the future of biotechnology, leaving an indelible mark on both academia and the world at large.

Citations

A total of 1,851 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        1,851
  • h-index          130
  • i10-index       23

Notable Publications 

  • Title: Transesterification of castor oil and ethanol using green catalyst for biodiesel production through Box-Behnken design
    Authors: Rajak, A.K., Harikrishna, M., Mahato, D.L., Karuna, M.S.L., Sarangi, P.K.
    Journal: Biocatalysis and Agricultural Biotechnology
    Year: 2025.
  • Title: Organic ligand-assisted Fe(II)-activated persulfate for enhanced degradation of chlorinated aromatic contaminants in soil remediation
    Authors: Vasudhevan, P., Shuhao, L., Ruoyu, Z., Dixit, S., Pu, S.
    Journal: Journal of Environmental Chemical Engineering
    Year: 2025.
  • Title: Deciphering the importance of nanoencapsulation to improve the availability of bioactive molecules in food sources to the human body
    Authors: Pugazhendhi, A., Alshehri, M.A., Kandasamy, S., Sarangi, P.K., Sharma, A.
    Journal: Food Chemistry
    Year: 2025.
  • Title: Closing the loop: A comprehensive exploration of Taiwan’s e-waste to resource conversion journey
    Authors: Gollakota, A.R.K., Mishra, R., Pai, C.-L., Kumar Sarangi, P., Arivalagan, P.
    Journal: Environmental Research
    Year: 2024.
  • Title: Food Waste to Food Security: Transition from Bioresources to Sustainability
    Authors: Sarangi, P.K., Pal, P., Singh, A.K., Sahoo, U.K., Prus, P.
    Journal: Resources
    Year: 2024.

Ashish Raj | Decision Sciences | Best Research Award

Mr. Ashish Raj | Decision Sciences | Best Research Award

Indian Institute of Management, Mumbai, India

Author Profile

Early Academic Pursuits 🎓

Ashish Raj’s academic journey is marked by a consistent quest for excellence and an eagerness to explore multiple disciplines. His academic story began with a strong foundation in his early education, where he achieved remarkable success in both the 10th and 12th grades. With an outstanding score of 85.40% in his ICSE examinations at St. Xavier’s High School, Patna, and 77.40% in his CBSE 12th grade exams from Loyola Senior Secondary School, Patna, Ashish demonstrated not only intelligence but also a keen understanding of his subjects.

His passion for engineering was evident as he pursued a Bachelor’s degree in Civil Engineering at Birla Institute of Technology (BIT) Mesra. There, Ashish excelled with a commendable 74% and distinguished himself both academically and in extracurricular activities. His participation in technical fests and his involvement in the National Service Scheme (NSS) provided a well-rounded experience, setting the stage for his future endeavors. His academic performance, combined with his leadership skills, solidified his position as a promising student.

Professional Endeavors and Contributions 💼

Ashish’s transition into the professional sphere was seamless, as he chose to further deepen his knowledge by pursuing a Master’s degree in Structural Engineering at the prestigious Indian Institute of Technology, Varanasi (IIT BHU). During his M.Tech, he developed a nuanced understanding of Civil Engineering’s technical aspects, which paved the way for his specialization in Operations and Supply Chain Management. At IIT BHU, Ashish’s academic rigor and dedication were reflected in his high distinction of 8.0/10, which speaks volumes about his technical expertise and determination.

Upon completion of his M.Tech, Ashish chose to expand his horizons by focusing on Operations and Supply Chain Management, an area that marries his engineering background with his analytical and problem-solving skills. His decision to pursue a Ph.D. in this field at the Indian Institute of Management (IIM) Mumbai reflects his growing ambition and desire to contribute significantly to the field of management and research.

Research Focus and Impact 🔬

Ashish Raj’s primary research focus revolves around Operations and Supply Chain Management, a domain that has become increasingly critical in today’s globalized economy. His doctoral research at IIM Mumbai examines innovative strategies to optimize supply chains, incorporating the latest technological advancements and management theories. His work aims to provide impactful insights into improving efficiency, reducing costs, and enhancing the sustainability of supply chains in various industries.

In addition to his academic pursuits, Ashish has consistently explored the intersection of engineering and management, demonstrating his interdisciplinary approach to problem-solving. His comprehensive understanding of structural engineering combined with supply chain dynamics gives him a unique perspective to tackle complex real-world issues.

Accolades and Recognition 🏅

Throughout his academic career, Ashish has been recognized for his dedication, intellectual curiosity, and leadership skills. His academic excellence in both undergraduate and postgraduate studies earned him recognition among his peers and faculty. At IIT BHU, his research on Structural Engineering earned him accolades, with professors praising his meticulous approach to complex engineering problems. His Ph.D. research at IIM Mumbai is also making waves in the academic community, where his findings have the potential to influence real-world supply chain practices.

Impact and Influence 🌍

Ashish Raj’s influence extends beyond just academic research. As a scholar, he actively contributes to his community by participating in various academic forums, conferences, and seminars. His work has inspired other students and budding researchers to explore the realms of Operations and Supply Chain Management and its relevance in contemporary industries. His interdisciplinary approach, blending Civil Engineering with business and management principles, has enabled him to provide valuable insights that have the potential to transform industries.

Moreover, his contributions to the technical fests, NSS activities, and his involvement with academic groups have positively impacted the community at BIT Mesra and IIT BHU, fostering a spirit of collaboration and academic excellence.

Legacy and Future Contributions ✨

Ashish Raj’s legacy is one of continuous learning and pursuit of excellence. As he progresses with his Ph.D., his research will undoubtedly have lasting effects in the fields of Operations and Supply Chain Management. The tools and frameworks he is developing could prove pivotal in transforming industries by optimizing logistics, enhancing customer service, and ensuring sustainability across supply chains.

Looking ahead, Ashish is determined to make significant contributions to the academic world. His vision includes not only publishing influential research but also mentoring future generations of scientists, engineers, and business leaders. Ashish’s academic journey and his passion for interdisciplinary research make him a role model for aspiring students who wish to bridge the gap between engineering and management, ultimately creating a sustainable and innovative future. His commitment to contributing meaningfully to the academic community and beyond will continue to inspire both his peers and the next generation of researchers.

In summary, Ashish Raj’s journey has been one of continual growth, where his curiosity and dedication have guided him to become a promising researcher with a bright future. With a passion for solving complex problems and a deep commitment to learning, he is poised to make lasting contributions in both academia and industry.

Santhosh balaji | Materials Science | Best Researcher Award

Mr. Santhosh balaji | Materials Science | Best Researcher Award

Kalasalingam university, India

Author Profile

🌟 Early Academic Pursuits: 

Santhoshbalaji M’s academic journey began with a strong foundation in physics, fueled by his innate curiosity for understanding the laws of nature. He pursued his B.Sc. in Physics at S.Vellaichamy Nadar College, under the esteemed Madurai Kamaraj University, Tamil Nadu. With a CGPA of 7.87/10, he demonstrated academic rigor and a passion for scientific inquiry.

Building on this foundation, he advanced to complete an M.Sc. in Physics (2017–2019) at the same institution, achieving a commendable CGPA of 7.27/10. These formative years laid the groundwork for his pursuit of specialized research in material science, igniting a profound interest in nanomaterials and photocatalysis. His thirst for knowledge motivated him to embrace research challenges and delve deeper into cutting-edge scientific domains.


🔬 Professional Endeavors:

Santhoshbalaji’s professional journey is marked by his ongoing pursuit of a Ph.D. in Physics at the Kalasalingam Academy of Research and Education, Tamil Nadu. With his thesis focused on surfactant and transition metal-assisted synthesis for photocatalysis, he is advancing our understanding of sustainable materials. His innovative approach combines theoretical expertise with hands-on experimentation, exploring novel synthesis techniques to address real-world environmental challenges.

As an educator and collaborator, Santhoshbalaji has honed his skills in team management, working in multidisciplinary teams to push the boundaries of scientific discovery. His professional endeavors are not confined to the lab; he actively mentors aspiring scientists, instilling in them a passion for innovation and sustainability.


🌍 Contributions and Research Focus:

Santhoshbalaji’s research revolves around nanomaterials and photocatalysis, where he employs advanced synthesis techniques to create materials with exceptional properties. His work on environmental remediation has significant implications for addressing global challenges such as water pollution and energy sustainability.

By integrating transition metals and surfactants, he is pioneering efficient photocatalytic processes for environmental cleanup, including pollutant degradation and wastewater treatment. His contributions to the field extend beyond academic research, showcasing practical applications that align with the global push for sustainability.


🏅 Accolades and Recognition: 

While his formal accolades are yet to reflect his full potential, Santhoshbalaji’s academic achievements, including consistent performance during his undergraduate and postgraduate studies, highlight his dedication. His research endeavors, characterized by originality and environmental relevance, have garnered respect and recognition within academic circles.

Santhoshbalaji’s work promises to lead to impactful publications and collaborations, elevating his status as a researcher committed to excellence. 🌟


✨ Impact and Influence: 

Santhoshbalaji’s influence extends beyond his technical expertise. By mentoring future scientists, he is shaping the next generation of innovators. His emphasis on sustainable practices inspires his peers and students to align their research goals with the pressing needs of our planet.

Through his dedication to collaborative research, he fosters a culture of shared learning and teamwork, demonstrating that the greatest scientific advancements are often the result of collective effort. 🌿


🌠 Legacy and Future Contributions: 

Santhoshbalaji envisions a future where scientific innovation and environmental responsibility go hand in hand. His commitment to sustainable materials positions him as a leader in the field of environmental remediation. In the coming years, he aims to:

  • Publish groundbreaking research on nanomaterials and their applications in energy and environmental science. 📚
  • Collaborate globally to address shared challenges, advancing the impact of his work beyond local boundaries. 🌐
  • Inspire budding researchers to think creatively and contribute to a sustainable future. 🚀

Through his unwavering dedication to material science, Santhoshbalaji M is poised to leave a lasting legacy that transcends academic achievements, driving positive change for generations to come. 🌍✨

Citations

A total of 36 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         36
  • h-index           05
  • i10-index        02

Notable Publications 

  • Title: Nitrogen-doped graphene and iron oxide nanoparticles for photocatalytic degradation
    Authors: Muthuvijayan, S., Banerjee, D., Chatterjee, S., Theivasanthi, T., Gopinath, S.C.B.
    Journal: Journal of the Taiwan Institute of Chemical Engineers
    Year: 2025.
  • Title: Chitosan-mediated tailoring of cadmium sulphide nanoparticle: Synthesis, properties, and interactive mechanisms
    Authors: Muthuvijayan, S., Manavalan, R.K., Ponraj, J.S., Gopinath, S.C.B., Theivasanthi, T.
    Journal: Process Biochemistry
    Year: 2024.
  • Title: Sodium lauryl sulphate-mediated synthesis: Unravelling the optimization path for enhanced stability and optical properties of cadmium sulphide nanoparticles
    Authors: Muthuvijayan, S., Balasubramanian, S., Theivasanthi, T., Gopinath, S.C.B.
    Journal: Process Biochemistry
    Year: 2024.
  • Title: Realization of Ti MOF/MoS2 hybrid nanostructure and their catalytic activity towards 4-nitrophenol reduction
    Authors: Dharman, R.K., Francis, B.M., Ponraj, J.S., Balasubramanian, S., Dhanabalan, S.C.
    Journal: Journal of Materials Research and Technology
    Year: 2022.
  • Title: Facile synthesis and characterisation of green luminescent carbon nanodots prepared from tender coconut water using the acid-assisted ultrasonic route
    Authors: Manoharan, P., Dhanabalan, S.C., Alagan, M., Ponraj, J.S., Somasundaram, C.K.
    Journal: Micro and Nano Letters
    Year: 2020.

Suresh K P | Biostatistics | Best Researcher Award

Dr. Suresh K P | Biostatistics | Best Researcher Award

ICAR- National Institute of Veterinary Epidemiology and Disease Informatics. India

Author Profile

Early Academic Pursuits 🎓

Dr. K.P. Suresh’s academic journey reflects his commitment to excellence in education and a passion for statistics. Born and raised in rural Karnataka, he completed his SSLC in 1984 from Sathanur High School, Magadi Taluk, Bangalore district. His early exposure to mathematical sciences laid the foundation for a lifelong pursuit of statistical knowledge.

He earned his B.Sc. in 1989 from the Government Science College, Bangalore University, specializing in Statistics, Economics, and Mathematics. His thirst for deeper understanding led him to pursue an M.Sc. in Statistics in 1991, also from Bangalore University. Recognizing his aptitude and enthusiasm for research, he obtained a Ph.D. in Biostatistics in 2007 from the prestigious National Institute of Mental Health and Neurosciences (NIMHANS). His doctoral thesis on the “Evaluation of Clustering Methods for Pattern Recognition of Scholastic Improvement in Rural Children” demonstrated his innovative approach to solving complex problems in education and rural development.

Professional Endeavors and Versatile Expertise 💼

With over three decades of experience, Dr. Suresh has worn many hats — as a teacher, statistician, scientist, and mentor. He embarked on his professional career with All India Radio, Dharwad, analyzing audience research data for five years. His expertise in biostatistics soon found its most impactful application in his 28-year tenure as a scientist, where he worked extensively on:

  • Designing experiments,
  • Data analysis, and
  • Interpretation of complex datasets.

His contributions were particularly noteworthy at the National Institute of Animal Nutrition and Physiology, Bangalore, where his work addressed critical challenges in animal health and productivity. Later, at the ICAR-National Institute of Veterinary Epidemiology and Disease Informatics, he delved into epidemiology, disease modeling, and risk mapping using advanced tools like remote sensing.

Teaching and Mentorship 📚

Dr. Suresh has been a dedicated educator, sharing his wealth of knowledge with students across various institutions. He has taught:

  • Undergraduate statistics for one year at Kalpatharu College, Tiptur, and
  • Postgraduate statistics for three years, including two years at the National Dairy Research Institute (NDRI), Bangalore.

His guidance has extended beyond classrooms, serving as a member of the board of examiners for Ph.D. theses, including his adjudication of a thesis on “Prediction of Secondary Structure of Proteins” at Bharathidasan University.

As a mentor, Dr. Suresh has guided 15 M.Sc. students and one Ph.D. scholar, fostering the next generation of statisticians. 🌟 His mentoring style has been widely appreciated for its clarity and depth.

Contributions and Research Focus 🔬

Dr. Suresh’s research spans diverse domains, including biostatistics, epidemiology, and disease modeling. Notable areas of his focus include:

  • Risk mapping for veterinary diseases,
  • Developing statistical tools for disease control, and
  • Utilizing remote sensing and GIS technologies for epidemiological studies.

His innovative approaches have directly influenced policies and practices in veterinary epidemiology, demonstrating his ability to bridge theoretical research with practical applications. 🐄📊

Accolades and Recognition 🏆

Dr. Suresh’s contributions have earned him immense respect in academic and scientific circles. His role in advancing biostatistics has been recognized nationally, particularly within the Indian Council of Agricultural Research (ICAR) network. As an esteemed Ph.D. examiner and thesis advisor, he has gained a reputation for his rigorous yet supportive evaluation process.

Impact and Influence 🌍

Through his career, Dr. Suresh has left a lasting impact on diverse fields, including education, veterinary science, and public health. His work on scholastic improvements in rural children reflects his commitment to social progress, while his contributions to animal disease modeling address critical challenges in agriculture and food security.

Legacy and Future Contributions 🔮

Dr. Suresh’s legacy is defined by his unwavering dedication to research, teaching, and mentorship. He has laid a strong foundation for biostatistics in India, particularly in the context of veterinary epidemiology. As he continues to engage in academic and research activities, his future contributions will likely shape new frontiers in disease modeling and statistical education. 🌟

In summary, Dr. K.P. Suresh’s journey is a testament to the transformative power of knowledge and innovation. Through his multi-faceted career, he has made significant contributions to science and society, ensuring his place as a luminary in biostatistics and epidemiology. ✨

Citations

A total of 3,051 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         3,051
  • h-index           144
  • i10-index        22

Notable Publications 

  1. Identification of molecular and cellular infection response biomarkers associated with anthrax infection through comparative analysis of gene expression data
    Authors: Rani, S., Ramesh, V., Khatoon, M., Hemadri, D., Suresh, K.P.
    Journal: Computers in Biology and Medicine
    Year: 2025

  1. Genomic exploration of foot-and-mouth disease signal molecules in Malnad Gidda and Hallikar breeds of Karnataka: A RNA-seq approach
    Authors: Sekar, Y.S., Suresh, K.P., Subramaniam, S., Barman, N.N., Patil, S.S.
    Journal: Indian Journal of Animal Sciences
    Year: 2024

  1. Decoding bovine coronavirus immune targets: an epitope informatics approach
    Authors: Rani, S., Khatoon, M., Hiremath, J., Yamini Sri, S., Patil, S.S.
    Journal: Animal Diseases
    Year: 2024

  1. Transmission patterns of malignant catarrhal fever in sheep and cattle in Karnataka, India
    Authors: Shyamsundar, K.A., Rathnamma, D., Gulati, B.R., Ranganatha, S., Patil, S.S.
    Journal: Veterinary Research Communications
    Year: 2024

  1. Comprehensive Spatial-Temporal and Risk Factor Insights for Optimizing Livestock Anthrax Vaccination Strategies in Karnataka, India
    Authors: Anandakumar, J., Suresh, K.P., Patil, A.V., Patil, S.S., Hemadri, D.
    Journal: Vaccines
    Year: 2024

BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

Dr. BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

GMR Institute of Technology, India

Author Profile

Early Academic Pursuits 📚

Dr. Bappa Mondal’s academic journey is a testament to his unwavering dedication and passion for excellence. He began his educational voyage with stellar performance in his Madhyamik (10th) examination, securing an impressive 80.87% from the West Bengal Board of Secondary Education in 2007. This strong foundation was further fortified during his H.S. (10+2) studies under the West Bengal Council of Higher Secondary Education, where he achieved a commendable 64.60% in 2009.

His passion for Mechanical Engineering propelled him to pursue a B.Tech. in Mechanical Engineering from the West Bengal University of Technology, where he graduated in 2013 with an impressive 8.21/10 CGPA. His drive for academic excellence continued as he undertook an M.Tech. in Design & Manufacturing at the prestigious National Institute of Technology (NIT) Silchar, achieving a stellar 8.56/10 CGPA in 2016. Dr. Mondal’s thirst for knowledge culminated in earning a Ph.D. in Mechanical Engineering from NIT Silchar in 2021, where his research on “Numerical Investigation on Mixing Performance in Passive and Active Micromixers” demonstrated his innovative approach to solving complex engineering challenges. 🛠️


Professional Endeavors 🌟

Dr. Mondal’s professional career is equally illustrious. Currently serving as a Senior Assistant Professor in the Department of Mechanical Engineering at GMR Institute of Technology (Autonomous), Andhra Pradesh, he has been instrumental in shaping the academic futures of countless students. Since joining the institute on October 3, 2021, he has contributed significantly to its NBA-accredited programs. His annual CTC of ₹8.80 lakh reflects his value and expertise in the field. 💼

Dr. Mondal teaches a variety of undergraduate courses, including Design for Manufacturing, Strength of Materials, Kinematics of Machinery, Computer-Aided Machine Drawing, and Engineering Drawing. His ability to simplify complex concepts and his passion for teaching have earned him the admiration of his students and colleagues alike. ✨


Contributions and Research Focus 🔬

With over 5 years of dedicated research experience, Dr. Mondal has made significant contributions to the field of micromixers. His Ph.D. research at NIT Silchar focused on improving mixing performance in passive and active micromixers, an area critical for applications in microfluidics and bioengineering. His innovative numerical investigations have paved the way for advancements in designing more efficient micromixing systems. 🌐

Dr. Mondal’s research is characterized by its interdisciplinary approach, combining principles of fluid mechanics, computational modeling, and design optimization. His findings have been widely appreciated and serve as a valuable resource for both academia and industry. His passion for innovation extends beyond his Ph.D. work, as he continues to explore emerging trends in design and manufacturing technologies. 📈


Accolades and Recognition 🏆

Dr. Mondal’s commitment to academic and professional excellence has been recognized through several accolades. His impressive academic record and impactful research have earned him respect in the mechanical engineering community. As a faculty member at GMR Institute of Technology, he has been acknowledged for his teaching excellence and his ability to mentor students effectively. 🌟

His research contributions during his Ph.D. at NIT Silchar, an Institution of National Importance, underscore his expertise and the depth of his work. His ability to blend theoretical knowledge with practical applications sets him apart as a leading academician in his field. 🥇


Impact and Influence 🌍

Dr. Mondal’s work has a far-reaching impact, influencing not only his students but also the broader academic community. His focus on cutting-edge research in micromixers has implications for diverse fields, including biotechnology, pharmaceuticals, and chemical engineering. His teaching has inspired a generation of students to pursue careers in mechanical engineering, fostering innovation and creativity. 🌱

Through his dedication to excellence in both teaching and research, Dr. Mondal has established himself as a thought leader, driving progress in mechanical engineering education and research. His ability to bridge the gap between theoretical knowledge and practical applications ensures his influence will be felt for years to come. 🌟


Legacy and Future Contributions 🚀

As Dr. Mondal continues his journey, his legacy as a passionate educator and innovative researcher will undoubtedly grow. He aspires to make further contributions to the field of micromixers, developing advanced technologies that address real-world challenges. His commitment to mentoring young engineers ensures a lasting impact on the next generation of innovators. 🌠

Dr. Mondal’s journey exemplifies the power of perseverance, passion, and a relentless pursuit of excellence. With his strong foundation in academics, impactful research, and dedication to teaching, he is poised to leave an indelible mark on the field of mechanical engineering. His story serves as an inspiration for aspiring engineers, educators, and researchers alike. 🌟

Citations

A total of 371 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        371
  • h-index          09
  • i10-index       09

Notable Publications 

  • Title: Teaching Learning Optimization-Based Sliding Mode Control for Frequency Regulation in Microgrid
    Authors: A. Dev, B. Mondal, V. K. Verma, V. Kumar
    Journal: Electrical Engineering
    Year: 2024.
  • Title: Numerical and Experimental Investigations of Mixing Length in Square Wave Serpentine Micromixer with Obstacles
    Authors: B. Mondal, P. K. Patowari, S. Pati
    Journal: Microsystem Technologies
    Year: 2024.
  • Title: Techno-Societal 2018: Proceedings of the 2nd International Conference on Advanced Technologies for Societal Applications – Volume 2
    Authors: P. M. Pawar, B. P. Ronge, R. Balasubramaniam, A. S. Vibhute, S. S. Apte
    Publisher: Springer Nature
    Year: 2019.
  • Title: Enhancing Load Frequency Control and Automatic Voltage Regulation in Interconnected Power Systems Using the Walrus Optimization Algorithm
    Authors: M. B. M. B. T. Ark Dev, Kunalkumar Bhatt, Bappa Mondal, Vineet Kumar, Vineet Kumar
    Journal: Scientific Reports
    Year: 2024.
  • Title: Bridging the Industry–Academia Gap: An Experiential Learning for Engineering Students
    Authors: G. V. S. S. Sharma, A. L. Naidu, K. S. Rao, B. V. Suresh, P. Kumar, Y. Shireesha, …
    Journal: Journal of Formative Design in Learning
    Year: 2023.

Dr. Vineet Kumar | Radiology | Best Researcher Award

Dr. Vineet Kumar | Radiology | Best Researcher Award

College of Veterinary and Animal Sciences, Bihar, India

Author Profile

🎓 Early Academic Pursuits

Dr. Vineet Kumar’s academic journey began with an unwavering commitment to veterinary sciences. Completing his BVSc & AH degree from KVAFSU, Bidar in 2008 with an impressive 82.40%, Dr. Kumar secured third rank in his class. His determination to excel continued with his MVSc at the prestigious ICAR-IVRI, Izatnagar, where he achieved an exceptional 85.89% in Veterinary Surgery and Radiology, earning third position in his division. In 2015, he culminated his academic pursuits with a PhD from ICAR-IVRI, where his remarkable performance (83.95%) earned him the first rank in his division.

His academic theses reflect his innovative approach to veterinary science. His MVSc thesis explored acellular buffalo small intestinal submucosa and fish swim bladder for repairing full-thickness skin wounds in rabbits, showcasing his interest in cutting-edge surgical techniques. His PhD thesis focused on determining electrocardiographic, echocardiographic, and haemato-biochemical cardiac reference values in sheep and goats, setting benchmarks in veterinary cardiology.

💼 Professional Endeavors

Dr. Kumar began his professional career as an Assistant Professor at Junagadh Agricultural University, Gujarat, in 2012. His tenure there, spanning nearly six years, was marked by dedicated teaching and innovative research. In 2018, he joined Sardar Vallabhbhai Patel University of Agriculture & Technology, Meerut, where his passion for veterinary surgery and radiology further flourished.

Since 2023, Dr. Kumar has been serving as an Associate Professor and Head of the Department of Veterinary Surgery and Radiology at Bihar Animal Sciences University, Kishanganj. His leadership and expertise have greatly contributed to the academic and research excellence of the institution.

🔬 Contributions and Research Focus

Dr. Kumar’s research has had a profound impact on veterinary surgery and radiology. His work on the repair of skin wounds using acellular biomaterials has opened new avenues in wound management for animals. Similarly, his PhD research has established vital cardiac reference values for sheep and goats, aiding in better diagnosis and treatment.

His expertise extends to advanced diagnostic techniques, including electrocardiography and echocardiography, essential tools in modern veterinary practice. Dr. Kumar’s contributions also include innovative surgical methods that improve animal welfare and recovery.

🏆 Accolades and Recognition

Dr. Kumar’s academic and professional achievements have earned him several accolades. His consistent ranking in his academic endeavors reflects his dedication and brilliance. Qualifying ASRB-NET in 2010 highlighted his proficiency in Veterinary Clinical Sciences, while completing the CCC+ certification in computer concepts demonstrated his adaptability to modern technological tools.

🌟 Impact and Influence

Dr. Kumar’s influence extends beyond academia and research. As an educator, he has inspired countless students to pursue excellence in veterinary sciences. His engaging teaching style and focus on practical knowledge equip students with the skills required for real-world challenges.

As a researcher, his innovative approaches have advanced veterinary surgical techniques and diagnostic methodologies, benefiting both animals and the veterinary community. His leadership at Bihar Animal Sciences University has also fostered a culture of academic rigor and research innovation.

🐾 Legacy and Future Contributions

Dr. Kumar’s journey is a testament to his unwavering dedication to veterinary sciences. His contributions have already left an indelible mark, but his aspirations for the future remain equally ambitious. He envisions developing advanced diagnostic and therapeutic techniques that further enhance animal care.

Through his teaching, research, and leadership, Dr. Kumar is committed to nurturing the next generation of veterinary professionals and expanding the horizons of veterinary science. His legacy will undoubtedly inspire future veterinarians and researchers to pursue excellence in their endeavors.

Citations

A total of 745 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         745
  • h-index           16
  • i10-index        22

Notable Publications 

  • Chemical Restraint of Wild Animals
    • Author: Vineet Kumar
    • Publisher: NIPA, New Delhi
    • Publication Year: 2024.
  • Veterinary First Aid
    • Editor: Vineet Kumar
    • Publisher: NIPA, New Delhi
    • Publication Year: 2024.
  • High Plasma Magnesium and Phosphorus Levels and Their Correlation with Struvite Urolithiasis in Buffaloes
    • Author: Vineet Kumar
    • Journal: Journal of Trace Elements and Minerals
    • Publication Year: 2024.
  • Effect of Glycopyrrolate-Xylazine Supplementation on Zoletil-induced Total Intramuscular Anaesthesia in Dogs
    • Author: Vineet Kumar
    • Journal: Indian Journal of Animal Research
    • Publication Year: 2024.
  • Comparative Evaluation of Two Different Xenogenic Acellular Matrices on Full-Thickness Skin Wound Healing
    • Author: Vineet Kumar
    • Journal: Journal of Wound Care
    • Publication Year: 2024.

Satyanarayana Reddy | Radiation Dosimetry | Best Researcher Award

Dr. S. Satyanarayana Reddy | Radiation Dosimetry | Best Researcher Award

RV Institute of Technology and Management, Bengaluru, India

Author Profile

Early Academic Pursuits 📚🎓

Dr. S. Satyanarayana Reddy’s academic journey is a testament to his dedication and passion for physics and material science. He began his educational pursuits at Sri Krishnadevaraya University in Anantapur, Andhra Pradesh, where he completed his Bachelor of Science (B.Sc.) in Mathematics, Physics, and Chemistry in 2009. Despite facing the challenges of a rigorous curriculum, Dr. Reddy excelled in his undergraduate studies, paving the way for his future in the field of physics. His interest in deeper scientific exploration led him to pursue a Master of Science (M.Sc.) in Physics at Sri Venkateswara University in Tirupati, where he achieved an impressive 71% and strengthened his foundational knowledge in the field.

In 2014, Dr. Reddy took a significant step forward in his academic journey by enrolling in the Doctor of Philosophy (Ph.D.) program at Visvesvaraya Technological University, Belagavi. His research was conducted at the renowned Inter University Accelerator Center in New Delhi, where he focused on ion beam dosimetry. His thesis titled “Synthesis and characterization of Al₂O₃ for ion beam dosimetry” explored cutting-edge methodologies, involving scattering 80 MeV C6+ ions through gold foil for low fluence ion beam irradiation, providing new insights into material science and ion beam analysis. This research solidified Dr. Reddy’s commitment to advancing material science and prepared him for a prominent role in the academic and research domains. 🎯🔬

Professional Endeavors 💼

With over eight years of experience in teaching and research, Dr. Reddy has made a significant impact at several academic institutions. After completing his doctoral research, he began his professional career as a Junior Research Fellow in March 2014, where he worked under the Atomic Energy Regulatory Board at the PES Institute of Technology, Bangalore. His work focused on the synthesis and characterization of Al₂O₃ for ion beam dosimetry, a highly specialized area within material science and nuclear physics.

In 2016, Dr. Reddy transitioned to a Research Fellow position at PES Institute of Technology, where he honed his research skills further. His ability to combine theoretical knowledge with practical applications helped him establish himself as a capable researcher, collaborating on various projects related to ion beam analysis and material characterization. 🧑‍🔬📊

In 2020, Dr. Reddy shifted his focus towards teaching. He took on roles as an Assistant Professor in multiple prestigious institutions, including Acharya Institute of Graduate Studies, Bengaluru City University, and RV Institute of Technology and Management. His commitment to excellence in education has helped shape the academic careers of many students, particularly in Engineering Physics, Atomic and Molecular Physics, Quantum Mechanics, and Nuclear Physics. 🎓📝

Contributions and Research Focus 🔬💡

Dr. S. Satyanarayana Reddy’s research has primarily focused on material science and ion beam dosimetry, with his work exploring the synthesis and characterization of Al₂O₃ for ion beam analysis. His Ph.D. research provided insights into the practical applications of ion beams for radiation dosimetry, which is essential for fields such as nuclear medicine, radiation therapy, and space exploration. The techniques Dr. Reddy developed during his research have opened new pathways for understanding the behavior of materials under ion irradiation, a topic of critical importance for both academic research and industrial applications.

Dr. Reddy’s work also extends to improving the accuracy of experimental designs, focusing on crystal field analysis, theoretical modeling, and instrumentation design. His contributions to material science have not only deepened the understanding of ion beam interactions but have also paved the way for new methodologies in dosimetry applications and material characterization. 🔧⚙️

Accolades and Recognition 🏆🌟

Dr. Reddy’s accomplishments have earned him significant recognition in the scientific community. His remarkable achievement of qualifying for CSIR-NET (National Eligibility Test) in Physics with an All India Rank of 148 is a testament to his dedication and excellence in the field of physics. This recognition reflects his deep understanding of fundamental principles and his ability to apply them to real-world problems. 🏅

Impact and Influence 🌍📈

Dr. S. Satyanarayana Reddy’s work as both an academic and a researcher has had a lasting influence on the field of material science and physics education. His contributions to ion beam dosimetry have advanced the field, providing valuable insights for industries that rely on radiation-based technologies. As an educator, he has had a profound impact on the lives of his students, fostering an environment of intellectual curiosity and scientific inquiry. His passion for physics and research is reflected in his teaching, motivating students to pursue careers in science and technology. 💬

Legacy and Future Contributions 🔮🎯

Dr. Reddy’s legacy lies in his continued dedication to advancing knowledge in material science and nuclear physics. His research in ion beam dosimetry will undoubtedly continue to play a vital role in radiation-related applications, with potential impacts in fields such as medicine, energy, and space exploration. As he continues to develop new methodologies and expand his academic contributions, Dr. Reddy is well-positioned to make significant future contributions in both scientific research and education.

In the coming years, Dr. Reddy aims to further explore cutting-edge technologies, leveraging advanced material science techniques to solve global challenges. His goal is to continue fostering innovation and encourage his students to become leaders in science and technology, ensuring his work leaves a lasting and positive impact on both the scientific community and the world at large. 🌐🔮

Citations

A total of 156 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         156
  • h-index           18
  • i10-index        08

Notable Publications 

  • Title: Exploring the impact of Sm3+ doping on the structural, optical, and photocatalytic properties of ZnAl2O4 spinels
    Authors: Srinatha, N.; Satyanarayana Reddy, S.; Gurushantha, K.; Manjunatha, S.O.; Madhu, A.
    Journal: Ceramics International
    Year: 2024.
  • Title: Carbon-based materials for luminescence thermometers
    Authors: Reddy, S.S.; Prakash, N.G.
    Book Title: Luminescent Thermometers: Fundamentals, Materials and Applications
    Year: 2024.
  • Title: Different Synthesis Methods of Persistent Luminescence Nanoparticles
    Authors: Nagabhushana, K.R.; Reddy, S.S.
    Book Title: Progress in Optical Science and Photonics
    Year: 2024.
  • Title: Effect of aliovalent substitution in the band structure engineered Ca2+-doped LaFeO3 nanoparticles for visible light-induced photocatalytic studies
    Authors: Srinatha, N.; Satyanarayana Reddy, S.; Al-Dossari, M.; Tangod, V.B.; Madhu, A.
    Journal: Ceramics International
    Year: 2024.
  • Title: Thermoluminescence mechanism of microwave combustion synthesized γ-irradiated Al2O3:Tm3+ phosphor
    Authors: Satyanarayana Reddy, S.; Nagabhushana, K.R.; Thejavathi, N.R.; Suresh Kumar, M.R.; Singh, F.
    Journal: Journal of Luminescence
    Year: 2023.

SURYA NARAYAN PANDA | Healthcare Innovations | Outstanding Scientist Award

Prof. Dr. SURYA NARAYAN PANDA | Healthcare Innovations | Outstanding Scientist Award

CHITKARA UNIVERSITY, PUNJAB, India

Author Profile

Early Academic Pursuits 🎓✨

Prof. Surya Narayan Panda’s academic journey is a testament to his passion for knowledge and excellence. Born and raised in Odisha, India, he began his educational journey with a B.Sc. (Hons) degree, graduating with distinction from Sambalpur University. His exceptional performance laid the foundation for future academic endeavors. Pursuing his fascination with computing and technology, he earned an MCA from Kurukshetra University, Haryana, where he showcased exceptional analytical and programming skills. His thirst for knowledge culminated in a Ph.D. in Computer Science from the same prestigious university, marking a significant milestone in his academic career.

Professional Endeavors 🏫👨‍🏫

Prof. Panda’s professional trajectory reflects his dedication to fostering innovation and research. As the Pro Vice Chancellor (Research) at Chitkara University, Punjab, since January 2024, he has played a pivotal role in shaping the university’s research landscape. Under his leadership, Chitkara University, accredited with an NAAC A+ grade, has witnessed remarkable advancements in research output and academic quality. With a career spanning decades, he has been instrumental in bridging the gap between academia and industry, driving impactful collaborations.

Contributions and Research Focus 🔍💡

An ardent researcher, Prof. Panda has contributed extensively to the field of computer science. His research spans diverse areas, including artificial intelligence, machine learning, data analytics, and software engineering. Through innovative methodologies and problem-solving approaches, he has published numerous high-impact research papers in reputed journals and conferences.
As a mentor, he has guided several Ph.D. scholars, nurturing the next generation of researchers. His emphasis on interdisciplinary research has fostered innovation in areas such as healthcare informatics, education technology, and sustainable computing.

Accolades and Recognition 🏆🎖️

Prof. Panda’s exemplary contributions have been recognized at both national and international levels. He has received numerous awards for academic excellence and research leadership. His pivotal role in advancing the university’s research portfolio earned him accolades from academic and industry bodies alike. Prof. Panda is also a sought-after speaker at conferences and workshops, where he shares insights on emerging trends and challenges in computer science.

Impact and Influence 🌟🌏

Prof. Panda’s influence extends beyond the confines of Chitkara University. As a thought leader, he actively participates in policy discussions, contributing to shaping the future of higher education in India. His initiatives in promoting innovation, entrepreneurship, and skill development have had a transformative impact on students and faculty alike.
His ability to inspire and lead by example has made him a role model for aspiring academics and researchers. Through his work, he has fostered a culture of excellence and collaboration, driving impactful research that addresses real-world challenges.

Legacy and Future Contributions 🚀🌈

Prof. Panda’s legacy is defined by his unwavering commitment to research excellence and academic growth. As Pro Vice Chancellor (Research), he envisions positioning Chitkara University as a global hub for cutting-edge research and innovation. His focus on fostering international collaborations and industry partnerships will further enhance the university’s global standing.
In the years to come, Prof. Panda aims to contribute to policy-making in higher education, advocate for sustainable development, and mentor emerging leaders in academia and research. His enduring contributions will continue to inspire and shape the academic and research landscape for generations to come.

Citations

A total of 1,275 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        1,275
  • h-index          119
  • i10-index       21

Notable Publications 

  • Title: Enhancing Performance and Latency Optimization in Fog Computing with a Smart Job Scheduling Approach
    Authors: Rani, M., Guleria, K., Panda, S.N.
    Journal: Statistics, Optimization and Information Computing
    Year: 2025.
  • Title: Improving QoS Parameters in Fog Computing Environment using QCSO Framework
    Authors: Rani, M., Guleria, K., Panda, S.N.
    Journal: Communications on Applied Nonlinear Analysis
    Year: 2025.
  • Title: Enhancing QoS in Delay-Sensitive IoT Applications through Volunteer Computing in Fog Environments
    Authors: Rani, M., Guleria, K., Panda, S.N.
    Journal: International Journal of Mathematical, Engineering and Management Sciences
    Year: 2024.
  • Title: SMILEY—assistive application to support social and emotional skills in SPCD individuals
    Authors: Chawla, M., Panda, S.N., Khullar, V.
    Journal: Medical and Biological Engineering and Computing
    Year: 2024.
  • Title: A Comprehensive Review on Vehicular Ad-hoc Networks Routing Protocols for Urban and Highway Scenarios, Research Gaps and Future Enhancements
    Authors: Seth, I., Guleria, K., Panda, S.N.
    Journal: Peer-to-Peer Networking and Applications
    Year: 2024.

Hari Babu Bollikolla | Chemistry | Best Researcher Award

Prof. Hari Babu Bollikolla | Chemistry | Best Researcher Award

acharya nagarjuna university, India

Author Profile

Early Academic Pursuits 🎓

Dr. Bollikolla’s academic foundation is a testament to his commitment to excellence. He began his journey with stellar performance in his Secondary School Certificate (SSC), achieving a commendable 76% in 1993 under the Board of Secondary Education, Andhra Pradesh (BSE, AP).

Continuing his pursuit of knowledge, he completed his Intermediate (MPC) in 1995 with an impressive 81.2%, securing a strong foundation in mathematics, physics, and chemistry under the Board of Intermediate Education (BIE), Andhra Pradesh.

His undergraduate studies in B.Sc. (MPC) at Andhra University (AU) in 1999 laid the groundwork for his specialization in chemistry. Demonstrating his analytical acumen and a keen interest in organic chemistry, he pursued an M.Sc. in Organic Chemistry at Andhra University in 2001, securing 60%.

Expanding his academic horizon, Dr. Bollikolla completed his Ph.D. in Physical Sciences in 2006 at Acharya Nagarjuna University (ANU), focusing on advanced techniques like kinetics and proton NMR spectroscopy. His thesis, titled “Conformational Analysis of 2-Aryl-trans-Decahydroquinolin-4-ols by Kinetics and Proton NMR Spectroscopy,” under the guidance of Prof. P.V.V. Satyanarayana, reflects his prowess in cutting-edge research.

In 2011, he diversified his knowledge base by earning an MBA in HR and Finance from Acharya Nagarjuna University, showcasing his versatility in both science and management.


Professional Endeavors 🌍

Dr. Bollikolla has a rich career trajectory as a distinguished professor and administrator. His tenure as a Professor in the Department of Chemistry at Acharya Nagarjuna University has been marked by innovative teaching methodologies and mentoring students in cutting-edge research.

As the Registrar of Andhra Kesari University, he plays a pivotal role in academic administration, fostering institutional growth, and implementing reforms to enhance educational quality. His leadership ensures a conducive environment for holistic learning and research.


Contributions and Research Focus 🔬

Dr. Bollikolla’s research contributions are centered on conformational analysis, kinetics, and spectroscopic techniques, which have broad implications in understanding molecular interactions and chemical reactions. His expertise in proton NMR spectroscopy has paved the way for advancements in structural chemistry, particularly in the analysis of organic compounds.

Beyond his primary domain, his interdisciplinary knowledge, especially his MBA in HR and Finance, has enabled him to contribute effectively to academic management and resource optimization.


Accolades and Recognition 🏆

Dr. Bollikolla’s contributions to academia and research have been widely acknowledged. As an administrator, he has received accolades for his commitment to excellence and his role in shaping Andhra Kesari University’s growth. His academic endeavors reflect his dedication to fostering innovation and nurturing young minds.


Impact and Influence 🌟

Dr. Bollikolla has made an indelible mark on the academic community through his role as a mentor, professor, and administrator. His research work continues to influence students and scholars, while his administrative efforts ensure the seamless functioning of the universities he serves.

His work demonstrates the seamless integration of scientific research and academic leadership, inspiring students to pursue interdisciplinary excellence.


Legacy and Future Contributions 🔮

Dr. Hari Babu Bollikolla’s legacy lies in his commitment to both academic rigor and administrative excellence. His ability to balance research and management sets a benchmark for educators and administrators alike.

As he continues his journey, Dr. Bollikolla aims to further the integration of cutting-edge research with practical applications, contributing to societal advancement. His emphasis on interdisciplinary approaches and holistic education ensures that his impact will resonate for generations.

Citations

A total of 1,275  citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         1,275
  • h-index           167
  • i10-index        18

Notable Publications 

  • PEG 400-Catalyzed C3 & O-Alkylation Reactions of 4-Hydroxycoumarin—A Study
    Authors: Pulagam, M., Bollikolla, H.B.
    Journal: Current Chemistry Letters
    Year: 2025.
  • Characterization of Doxorubicin Unknown Impurity using 1D-NMR (1H) Spectroscopy and LC-MS Mass Ionization
    Authors: Somepally, S., Goh, K.W., Bollikolla, H.B.
    Journal: Egyptian Journal of Chemistry
    Year: 2024.
  • Enhanced Catalytic, Antioxidant, and Electrochemical Properties of Green-Synthesized Graphene-Silver Nanocomposite Utilizing Moringa Oleifera Leaf Extract
    Authors: Rahim, A., Venkata Nadh, R., Saeed, A.M.M.J., Bollikolla, H.B., Ramachandran, D.
    Journal: ChemistrySelect
    Year: 2024.
  • GC-MS Profiling of Secondary Metabolites in Hexane and Ethyl Acetate Crude Extracts of Red Sea Soft Coral Xenia macrospiculata
    Authors: Kasimala, M., Bollikolla, H.B.
    Journal: Toxicology International
    Year: 2024.
  • Sonochemical Synthesis and In Silico Studies of Phthalazine Scaffolds Bearing 1,3,4-Oxadiazolyl-1,2,3-triazoles as Potent Antitubercular Agents
    Authors: Gollapalli, V.R., Prasad, P.R., Prasad, M.S.N.A., Pindi, S.R., Bollikolla, H.B.
    Journal: Russian Journal of Organic Chemistry
    Year: 2024.

Shahid Mohammad Ganie | Computer Science | Best Researcher Award

Dr. Shahid Mohammad Ganie | Computer Science | Best Researcher Award

AI Research Centre, Woxsen University, India

Author Profile

Early Academic Pursuits 🎓✨

Dr. Shahid Mohammad Ganie’s academic journey is a testament to his dedication to excellence. He began his higher education by earning a Bachelor’s degree in Mathematics (B.Sc) from the prestigious University of Kashmir, laying a strong foundation in analytical and logical reasoning. He further pursued a Master’s degree in Computer Applications (MCA) from the School of Mathematical and Computer Sciences, BGSB University, Jammu and Kashmir, where he excelled as a Gold Medalist, showcasing his commitment to academic brilliance.

Dr. Ganie’s passion for innovation and technology led him to complete his Ph.D. in Healthcare Informatics from the same institution. During his doctoral research, he focused on the intersection of artificial intelligence and healthcare, a domain that continues to define his professional endeavors and contributions.


Professional Endeavors 💼💡

Currently serving as an Assistant Professor and Research Scientist at the AI Research Centre, Woxsen University, Hyderabad, Dr. Ganie has amassed over 2 years of teaching experience at both undergraduate and postgraduate levels. His dual role as an academic and researcher enables him to bridge theoretical knowledge with practical applications, particularly in cutting-edge fields like Explainable AI, Data Analytics, and Machine Learning.

Dr. Ganie also leads as the Program Director of MBA (BA, AI & ML) at Woxsen University. His leadership in this interdisciplinary program emphasizes integrating business acumen with technological advancements, preparing students to thrive in the AI-driven future.

As a Technology Advisory Board member of the AI Research Centre, he actively contributes to shaping the institution’s strategic direction, fostering innovation, and enhancing industry-academia collaboration.


Contributions and Research Focus 🔍🧠

Dr. Ganie’s research interests are diverse and impactful, encompassing Data Analytics, Explainable AI, Machine Learning, Deep Learning, Healthcare Informatics, and Medical Image Computing. His dedication to advancing these fields is evident through his extensive body of work:

  • Publications: Over 30 research articles in refereed journals, edited books, and renowned international conferences, highlighting his thought leadership in AI and healthcare informatics.
  • Patents: Holder of 2 patents in the healthcare domain, underscoring his innovative contributions to improving medical technologies.
  • Books: Editor of 2 books, published by reputed publishers like Elsevier and Taylor and Francis, further cementing his expertise and influence in the academic community.

His focus on Explainable AI ensures that AI systems remain transparent, interpretable, and trustworthy, particularly in healthcare informatics, where patient safety and ethical considerations are paramount.


Accolades and Recognition 🏆🌟

Dr. Ganie’s exemplary contributions have been recognized through numerous awards and honors:

  • Best Researcher Awards: He was bestowed with the Best Researcher Awards by the School of Business at Woxsen University for consecutive academic years, 2023 and 2024, in recognition of his outstanding research output.
  • Research Grants: Recipient of prestigious research grants that have enabled him to undertake groundbreaking projects in AI and healthcare.

These accolades are a testament to his relentless pursuit of excellence and his ability to inspire and lead within the academic and research community.


Impact and Influence 🌍🔗

Dr. Ganie’s work has far-reaching implications across academia and industry. As a mentor and Chair Professor, he nurtures the next generation of scholars, encouraging them to explore innovative solutions to real-world challenges. His role as a Technology Advisory Board member ensures that his insights shape institutional strategies, fostering growth and innovation.

His emphasis on AI-driven innovations in healthcare has the potential to revolutionize patient care by making diagnostic tools more accurate, accessible, and ethical.


Legacy and Future Contributions 🚀📚

Looking ahead, Dr. Ganie aims to continue advancing the fields of Data Analytics, Machine Learning, and Healthcare Informatics, driving AI innovations that benefit society. His ongoing projects, combined with his leadership roles, ensure that his impact will resonate for years to come.

As a dedicated mentor, he strives to inspire his students to become leaders in their respective fields. His commitment to bridging academia and industry is pivotal in fostering collaboration and ensuring the practical relevance of academic research.

Citations

A total of 187 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        187
  • h-index          23
  • i10-index       08

Notable Publications

  • Title: An Investigation of Ensemble Learning Techniques for Obesity Risk Prediction Using Lifestyle Data
    Authors: Ganie, S.M., Reddy, B.B., K, H., Rege, M.
    Journal: Decision Analytics Journal
    Year: 2025.
  • Title: Improved Liver Disease Prediction from Clinical Data through an Evaluation of Ensemble Learning Approaches
    Authors: Ganie, S.M., Dutta Pramanik, P.K., Zhao, Z.
    Journal: BMC Medical Informatics and Decision Making
    Year: 2024.
  • Title: Correction to: VER-Net: A Hybrid Transfer Learning Model for Lung Cancer Detection Using CT Scan Images
    Authors: Saha, A., Ganie, S.M., Dutta Pramanik, P.K., Mallik, S., Zhao, Z.
    Journal: BMC Medical Imaging
    Year: 2024.
  • Title: VER-Net: A Hybrid Transfer Learning Model for Lung Cancer Detection Using CT Scan Images
    Authors: Saha, A., Ganie, S.M., Pramanik, P.K.D., Mallik, S., Zhao, Z.
    Journal: BMC Medical Imaging
    Year: 2024.
  • Title: A Comparative Analysis of Boosting Algorithms for Chronic Liver Disease Prediction
    Authors: Ganie, S.M., Dutta Pramanik, P.K.
    Journal: Healthcare Analytics
    Year: 2024.