MOHD TAAZEEM ANSARI | MATERIAL SCIENCE | Best Researcher Award

Published on by Indian Scientist

Dr. MOHD TAAZEEM ANSARI | MATERIAL SCIENCE | Best Researcher Award

JAMIA MILLIA ISLAMIA NEW DELHI, India

Author Profile

🌱 Early Academic Pursuits

Dr. Mohd Taazeem Ansari embarked on his academic journey with a deep-rooted passion for Electronics 🔌 and Applied Physics ⚛️. He completed his Bachelor of Science (Hons) in Electronics from the University of Delhi (2009–2012) with an impressive 74.60% 🧠. During this foundational phase, his curiosity in embedded systems and microprocessor technology led him to develop a “Security Alarm System” based on the 8085 microprocessor—a project that showcased both his analytical skills and hands-on approach.

His academic voyage continued with a Master of Science in Electronics at Jamia Millia Islamia (2012–2014), where he further refined his expertise. Scoring 81.60%, he demonstrated excellence through his dissertation project, where he designed a “Software for Simulation of Op-Amp Circuits” using C programming 💻. His scientific curiosity extended beyond software, as seen in his internship, which explored the dielectric properties of sol-gel-derived Barium Strontium Titanate, providing a strong base in material science 🔬 and solid-state physics.

🎓 Professional Endeavors

Dr. Ansari pursued a Ph.D. in Applied Physics at Jamia Millia Islamia, New Delhi (2017–2021), focusing on the modelling of miniaturized functional devices using quantum mechanical methods for applications in Nano Electronics 🤖. His research aligned with global trends in quantum materials, nanoelectronics, and device fabrication, positioning him as a competent scientist in the cutting-edge domain of computational material science 🌐.

Currently associated with the Department of Applied Sciences & Humanities, Faculty of Engineering & Technology, Jamia Millia Islamia, Dr. Ansari contributes both as an academic and a researcher, guiding students and advancing theoretical models for practical nanoelectronic devices ⚙️.

🔬 Contributions and Research Focus

Dr. Ansari’s research explores the quantum mechanical modeling of nanoscale devices, a field crucial for the development of next-generation transistors, sensors, and optoelectronic systems 🌈. His work bridges computational physics and device engineering, and he has hands-on experience with advanced simulation tools like ATK-VNL (QuantumWise/Synopsys), Quantum Espresso (BURAI), and NanoDcal 🔍.

He has also utilized Agilent LCR meters in practical experiments to derive key parameters such as dielectric constants and impedance, combining computational and experimental approaches for a holistic understanding of material behavior.

🏅 Accolades and Recognition

Dr. Ansari has received multiple awards in recognition of his academic brilliance. Notably:

  • 🏆 Urdu Academy Excellence Award – Received three times for outstanding achievement in the Urdu language, showcasing his cultural and linguistic versatility 📜.

  • 🎓 Central Government Minority Scholarship – A prestigious award received twice, reflecting consistent academic merit and commitment to higher learning.

  • 🥇 Served as a City Operationalist during the Commonwealth Games 2010, contributing to a large-scale international event, demonstrating strong organizational and interpersonal skills.

🌍 Impact and Influence

Dr. Ansari’s interdisciplinary expertise in physics, electronics, and materials science positions him uniquely at the confluence of research, education, and technological innovation ⚡. His ability to mentor students, navigate both theoretical and experimental domains, and develop real-world applicable models enhances the research ecosystem at Jamia Millia Islamia and beyond.

His contributions are especially impactful in the context of sustainable nano-device modeling and green electronics 🌱, essential in today’s push toward eco-friendly technology ♻️.

📘 Legacy and Future Contributions

As Dr. Ansari continues to evolve in his academic career, his vision is set on the advancement of nanoelectronics, particularly in device miniaturization, sensor technology, and quantum simulations 🔗. With a strong command over both programming tools like Python 🐍 and research software, he is well-equipped to lead collaborative projects at the intersection of simulation and hardware implementation.

In the future, his work is likely to influence not just academia but also industrial applications of nano-functional materials and AI-driven simulation environments 🤖📊. Dr. Ansari’s journey reflects a rare blend of scientific rigor, cultural depth, and technological vision—hallmarks of a future-ready scholar 🌟.

Citations

A total of 81 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations             81
  • h-index               04
  • i10-index            02

Notable Publications 

  • Title: Fabrication of a zinc oxide/alginate (ZnO/Alg) bionanocomposite for enhanced dye degradation and its optimization study
    Authors: V.U. Siddiqui, A. Ansari, M.T. Ansari, M.K. Akram, W.A. Siddiqi
    Journal: RSC Advances
    Year: 2022

  • Title: Optimization of facile synthesized ZnO/CuO nanophotocatalyst for organic dye degradation by visible light irradiation using response surface methodology
    Authors: V.U. Siddiqui, A. Ansari, M.T. Ansari, M.K. Akram, W.A. Siddiqi, A.M. Alosaimi, et al.
    Journal: Catalysts
    Year: 2021

  • Title: Analyzing the electronic and conductive characteristics of zigzag graphene nanoribbons upon NOx and N₂O Adsorption: An ab-initio study
    Authors: M.M. Husain, M.T. Ansari, A. Almohammedi
    Journal: Materials Today Communications
    Year: 2024

  • Title: Occurrence of nonohmic trend in the ballistic transport mode of a modelled low dimensional device capable of performing electronic functions
    Authors: M.T. Ansari, A. Almohammedi, M. Rafat, M.M. Husain
    Journal: Superlattices and Microstructures
    Year: 2021

  • Title: Influence of varying carbon oxides concentrations on the selectivity of an electrical sensor utilizing graphene nanoribbons
    Authors: M.M. Husain, M.T. Ansari, A. Almohammedi
    Journal: Micro and Nanostructures
    Year: 2024

Bheru Lal Salvi | Mechanical Engineering | Best Researcher Award

Published on by Indian Scientist

Dr. Bheru Lal Salvi  | Mechanical Engineering | Best Researcher Award

College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur, India

Author Profile

🧑‍🎓 Early Academic Pursuits

Dr. Bheru Lal Salvi (डॉ. भेरू लाल सालवी), born on April 4, 1977, in Rajasthan, India, began his academic journey with brilliance and discipline. He completed his 10th and 12th grades under the Secondary Education Board of Rajasthan, securing First Division in both, in the years 1993 and 1995, respectively. His consistent academic excellence led him to pursue a Bachelor of Engineering (B.E.) in Mechanical Engineering from the prestigious Malaviya Regional Engineering College (now MNIT), Jaipur, and graduated in the year 2000 with First Division.

Driven by a passion for mechanical systems and innovations, Dr. Salvi pursued a Master of Technology (M.Tech.) in Manufacturing Systems Engineering from MNIT Jaipur in 2006, where he earned a First Division with Honors. The foundation laid during his early academic years proved pivotal for his future research-intensive roles. His scholarly curiosity further led him to complete a Doctor of Philosophy (Ph.D.) in Hydrogen-Fuelled Internal Combustion Engines from the Centre for Energy Studies, IIT Delhi, one of India’s top institutes, in 2016 — a significant milestone showcasing his dedication to sustainable energy solutions 🌱.

👨‍🏫 Professional Endeavors

With over 24 years of experience in teaching and research, Dr. Salvi has carved a significant niche in the field of mechanical and energy engineering. He commenced his professional journey as a Lecturer at Sri Balaji College of Engineering and Technology, Jaipur, serving from 2000 to 2005. In March 2005, he joined the College of Technology and Engineering (CTAE), MPUAT, Udaipur, as an Assistant Professor. Over the years, his unwavering commitment to academia and research led to successive promotions:

  • Associate Professor (2019–2022)

  • Professor (CAS) since June 2022

  • Head of the Department (2022–2025) of Mechanical Engineering, CTAE, MPUAT 🏛️

He also served a 3-year deputation as a Research Scholar under the QIP scheme sponsored by AICTE, during which he pursued his Ph.D. at IIT Delhi. His professional growth reflects not only a vertical rise in designation but also an ever-evolving commitment to academic excellence, innovation, and institutional service 📘.

🔬 Contributions and Research Focus

Dr. Salvi’s work is a testament to interdisciplinary research and sustainable development. His core research areas include:

  • Hydrogen, Biodiesel, and Biosyngas as green fuels 🔋

  • Internal Combustion Engines (IC Engines)

  • Combustion modeling and power generation systems

  • Computational Fluid Dynamics (CFD)

  • Mathematical Modeling & Simulations

  • System Design & Innovations and Mechatronics

His Ph.D. research on hydrogen-fueled internal combustion engines laid a strong foundation for future work in clean energy technologies. He has co-authored numerous peer-reviewed articles published in reputed journals such as Clean Technologies and Environmental Policy, Sustainable Energy Technologies and Assessments, and Waste Management & Research. His work on bio-oil recovery, co-pyrolysis, and engine performance with biodiesel blends reflects a profound interest in renewable and alternative energy systems 🔬🌍.

🏆 Accolades and Recognition

Dr. Salvi’s academic journey has been marked with honors and distinctions from the very beginning — from securing First Division with Honors in M.Tech. to completing a prestigious Ph.D. at IIT Delhi under the QIP Fellowship sponsored by AICTE. His leadership qualities were recognized through his appointment as the Head of the Department at CTAE, MPUAT. His role as a mentor, educator, and researcher has earned him respect and admiration from both students and peers 🎓🌟.

🌍 Impact and Influence

As a senior academic and researcher, Dr. Salvi’s influence spans academia, industry, and society. His research in sustainable fuels contributes directly to addressing global energy and environmental challenges. By mentoring young researchers and guiding students in innovative projects, he plays a critical role in building India’s future engineering talent. His work in combustion modeling, biofuels, and engine performance continues to impact the design and development of eco-friendly transport and energy systems 🌐🚗.

🌟 Legacy and Future Contributions

Dr. Bheru Lal Salvi’s academic legacy is deeply rooted in sustainable engineering solutions, knowledge dissemination, and research leadership. With ongoing interests in hydrogen technology, biodiesel applications, and mechatronic systems, he is expected to continue contributing to India’s National Hydrogen Mission and global Net Zero goals. His future endeavors are likely to focus on:

  • Scaling hydrogen IC engine technology

  • Innovative hybrid fuel systems

  • Collaborative projects with national and international institutions

Through his work, he continues to inspire students and researchers to innovate for a greener, smarter, and more sustainable world 🌱🔧📚.

Citations

A total of 1718 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        1718
  • h-index               17
  • i10-index            18

Notable Publications 

    1. Title: A novel approach for experimental study and numerical modeling of combustion characteristics of a hydrogen fuelled spark ignition engine
      Authors: B.L. Salvi, K.A. Subramanian
      Journal: Sustainable Energy Technologies and Assessments
      Year: 2022

    2. Title: Thermogravimetric studies on co-pyrolysis of raw/torrefied biomass and coal blends
      Authors: N.L. Panwar, B. Gajera, S. Jain, B.L. Salvi
      Journal: Waste Management & Research
      Year: 2020

    3. Title: Design improvement and experimental study on shell and tube condenser for bio-oil recovery from fast pyrolysis of wheat straw biomass
      Authors: B.L. Salvi, T. Soni, S. Jindal, N.L. Panwar
      Journal: SN Applied Sciences
      Year: 2021

    4. Title: Peeling of tough skinned fruits and vegetables: A review
      Authors: A.K.K.K.M. Vishal Kumar, S.M. Chavan, S.K. Jain, B.L. Salvi, N.K. Jain
      Journal: International Journal of Chemical Studies
      Year: 2019

    5. Title: Thermal degradation and gasification characteristics of Tung Shells as an open top downdraft wood gasifier feedstock
      Authors: L. Prasad, B.L. Salvi, V. Kumar
      Journal: Clean Technologies and Environmental Policy
      Year: 2015

ShivaPrakash | Mechanical Engineering | Best Researcher Award

Published on by Indian Scientist

Mr. ShivaPrakash | Mechanical Engineering | Best Researcher Award

New Horizon College of Engineering, India

Author Profile

🎓 Early Academic Pursuits

Dr. Shiva Prakash S embarked on his academic journey with a Bachelor of Engineering (B.E.) in Mechanical Engineering from Sir Siddhartha Institute of Technology, Tumkur, Karnataka, graduating in 2000. Demonstrating a keen interest in specialized engineering domains, he pursued a Master of Technology (M.Tech) in Tool Engineering at the Government Tool Room and Training Centre, Bangalore, completing it in 2007. This solid educational foundation laid the groundwork for his future endeavors in mechanical engineering and related interdisciplinary fields.

🏢 Professional Endeavors

Dr. Prakash’s professional career commenced in 2006 as a Lecturer in Mechanical Engineering at Dr. T. Thimmaiah Institute of Technology, Kolar Gold Fields (KGF), Karnataka. His dedication to teaching and research led him to New Horizon College of Engineering, Bangalore, in 2011, where he has been serving as an Assistant Professor in the Department of Mechanical Engineering. Over the years, he has been instrumental in mentoring students and contributing to the academic community through his teaching and research activities.

🔬 Contributions and Research Focus

Dr. Prakash’s research interests are diverse, encompassing mechanical engineering, materials science, and interdisciplinary studies. His notable contributions include:

  • Materials Engineering: Investigating the mechanical properties of metal matrix composites, such as Al-8011 reinforced with B₄C and carbon nanotubes, to enhance material performance.

  • Additive Manufacturing: Exploring the mechanical characterization of 3D-printed Poly Lactic Acid (PLA) composites infused with carbon nanotubes, aiming to improve the structural integrity of printed components.

  • Corrosion Studies: Examining the corrosion behavior of cenosphere-reinforced iron-based composite coatings, contributing to the development of durable materials for industrial applications.

  • Data Security: Developing innovative strategies for data protection and integrity in digital systems, addressing contemporary challenges in cybersecurity.

His interdisciplinary approach bridges the gap between traditional mechanical engineering and emerging technological fields, reflecting his adaptability and forward-thinking mindset.

🏆 Accolades and Recognition

Dr. Prakash’s contributions have been recognized through various memberships and awards:

  • Professional Memberships:

    • Member of the Institution of Engineers (India) since 2017.

    • Member of the Indian Society for Technical Education since 2017.

    • Member of the International Association of Engineers (IAENG) in multiple societies, including Mechanical Engineering, Artificial Intelligence, Bioinformatics, and Data Mining.

  • Research Grants:

    • Secured funding from the Karnataka State Council for Science and Technology for the project titled “Developing a System to Prevent Accidents from Sleep Driving” during 2022–2023.

These accolades underscore his commitment to advancing engineering education and research.

🌍 Impact and Influence

Dr. Prakash’s research has had a significant impact on both academia and industry:

  • Publications: Authored numerous research papers published in reputed journals and conferences, contributing to the body of knowledge in mechanical engineering and allied fields.

  • Collaborations: Engaged in collaborative research projects, fostering interdisciplinary partnerships that enhance the scope and applicability of his work.

  • Mentorship: Guided students and young researchers, nurturing the next generation of engineers and innovators.

His work not only advances scientific understanding but also addresses practical challenges, reflecting a balance between theoretical research and real-world applications.

🌟 Legacy and Future Contributions

Looking ahead, Dr. Prakash aims to continue his contributions to engineering and technology by:

  • Expanding Research Horizons: Delving deeper into emerging areas such as smart materials, sustainable manufacturing, and advanced data analytics.

  • Educational Initiatives: Developing innovative teaching methodologies and curricula to equip students with skills relevant to the evolving technological landscape.

  • Industry Engagement: Strengthening ties with industry partners to facilitate the translation of research findings into practical solutions.

Through these endeavors, Dr. Prakash aspires to leave a lasting legacy that bridges academia and industry, fostering innovation and societal advancement.

Citations

A total of 48 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations             48
  • h-index               02
  • i10-index            02

Notable Publications 

  • Title: Characterisation and evaluation of Al-8011 metal matrix composites reinforced with B4C + carbon nanotubes particulate
    Authors: S. Shivaprakash, H.K. Shivanand, M.K. Srinath, D. Bandhu
    Journal: International Journal of Materials Engineering Innovation
    Year: 2025

  • Title: Zero-Waste Manufacturing and Waste Minimization Strategies for Sustainable Production
    Author: S. Shivaprakash
    Conference: 16th International Conference on Materials Processing and Characterization
    Year: 2025

  • Title: Mechanical characterization of alumina and graphite dual particulates reinforced hybrid aluminum alloy (Al2219) matrix composites
    Author: S. ShivaPrakash
    Journal: Research on Engineering Structures & Materials
    Year: 2025

  • Title: Investigation of Mechanical Properties of 3D-Printed Poly Lactic Acid with CNT Nano Composites
    Authors: M.B. Thimmaiah, S.G. Sujith Kumar, S. Shiva Prakash, T. Jagadeesha, et al.
    Journal: Journal of The Institution of Engineers (India)
    Year: 2024

  • Title: Obstacle-Avoiding Robotic Vehicle for Efficient Navigation in Hospital Environments
    Authors: M.S.S. Prakash, J. Pramodraj, K.N. Kumar
    Repository: SSRN 
    Year: 2024

Santhosh balaji | Materials Science | Best Researcher Award

Published on by Indian Scientist

Mr. Santhosh balaji | Materials Science | Best Researcher Award

Kalasalingam university, India

Author Profile

🌟 Early Academic Pursuits: 

Santhoshbalaji M’s academic journey began with a strong foundation in physics, fueled by his innate curiosity for understanding the laws of nature. He pursued his B.Sc. in Physics at S.Vellaichamy Nadar College, under the esteemed Madurai Kamaraj University, Tamil Nadu. With a CGPA of 7.87/10, he demonstrated academic rigor and a passion for scientific inquiry.

Building on this foundation, he advanced to complete an M.Sc. in Physics (2017–2019) at the same institution, achieving a commendable CGPA of 7.27/10. These formative years laid the groundwork for his pursuit of specialized research in material science, igniting a profound interest in nanomaterials and photocatalysis. His thirst for knowledge motivated him to embrace research challenges and delve deeper into cutting-edge scientific domains.

🔬 Professional Endeavors:

Santhoshbalaji’s professional journey is marked by his ongoing pursuit of a Ph.D. in Physics at the Kalasalingam Academy of Research and Education, Tamil Nadu. With his thesis focused on surfactant and transition metal-assisted synthesis for photocatalysis, he is advancing our understanding of sustainable materials. His innovative approach combines theoretical expertise with hands-on experimentation, exploring novel synthesis techniques to address real-world environmental challenges.

As an educator and collaborator, Santhoshbalaji has honed his skills in team management, working in multidisciplinary teams to push the boundaries of scientific discovery. His professional endeavors are not confined to the lab; he actively mentors aspiring scientists, instilling in them a passion for innovation and sustainability.

🌍 Contributions and Research Focus:

Santhoshbalaji’s research revolves around nanomaterials and photocatalysis, where he employs advanced synthesis techniques to create materials with exceptional properties. His work on environmental remediation has significant implications for addressing global challenges such as water pollution and energy sustainability.

By integrating transition metals and surfactants, he is pioneering efficient photocatalytic processes for environmental cleanup, including pollutant degradation and wastewater treatment. His contributions to the field extend beyond academic research, showcasing practical applications that align with the global push for sustainability.

🏅 Accolades and Recognition: 

While his formal accolades are yet to reflect his full potential, Santhoshbalaji’s academic achievements, including consistent performance during his undergraduate and postgraduate studies, highlight his dedication. His research endeavors, characterized by originality and environmental relevance, have garnered respect and recognition within academic circles.

Santhoshbalaji’s work promises to lead to impactful publications and collaborations, elevating his status as a researcher committed to excellence. 🌟

✨ Impact and Influence: 

Santhoshbalaji’s influence extends beyond his technical expertise. By mentoring future scientists, he is shaping the next generation of innovators. His emphasis on sustainable practices inspires his peers and students to align their research goals with the pressing needs of our planet.

Through his dedication to collaborative research, he fosters a culture of shared learning and teamwork, demonstrating that the greatest scientific advancements are often the result of collective effort. 🌿

🌠 Legacy and Future Contributions: 

Santhoshbalaji envisions a future where scientific innovation and environmental responsibility go hand in hand. His commitment to sustainable materials positions him as a leader in the field of environmental remediation. In the coming years, he aims to:

  • Publish groundbreaking research on nanomaterials and their applications in energy and environmental science. 📚
  • Collaborate globally to address shared challenges, advancing the impact of his work beyond local boundaries. 🌐
  • Inspire budding researchers to think creatively and contribute to a sustainable future. 🚀

Through his unwavering dedication to material science, Santhoshbalaji M is poised to leave a lasting legacy that transcends academic achievements, driving positive change for generations to come. 🌍✨

Citations

A total of 36 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         36
  • h-index           05
  • i10-index        02

Notable Publications 

  • Title: Nitrogen-doped graphene and iron oxide nanoparticles for photocatalytic degradation
    Authors: Muthuvijayan, S., Banerjee, D., Chatterjee, S., Theivasanthi, T., Gopinath, S.C.B.
    Journal: Journal of the Taiwan Institute of Chemical Engineers
    Year: 2025.
  • Title: Chitosan-mediated tailoring of cadmium sulphide nanoparticle: Synthesis, properties, and interactive mechanisms
    Authors: Muthuvijayan, S., Manavalan, R.K., Ponraj, J.S., Gopinath, S.C.B., Theivasanthi, T.
    Journal: Process Biochemistry
    Year: 2024.
  • Title: Sodium lauryl sulphate-mediated synthesis: Unravelling the optimization path for enhanced stability and optical properties of cadmium sulphide nanoparticles
    Authors: Muthuvijayan, S., Balasubramanian, S., Theivasanthi, T., Gopinath, S.C.B.
    Journal: Process Biochemistry
    Year: 2024.
  • Title: Realization of Ti MOF/MoS2 hybrid nanostructure and their catalytic activity towards 4-nitrophenol reduction
    Authors: Dharman, R.K., Francis, B.M., Ponraj, J.S., Balasubramanian, S., Dhanabalan, S.C.
    Journal: Journal of Materials Research and Technology
    Year: 2022.
  • Title: Facile synthesis and characterisation of green luminescent carbon nanodots prepared from tender coconut water using the acid-assisted ultrasonic route
    Authors: Manoharan, P., Dhanabalan, S.C., Alagan, M., Ponraj, J.S., Somasundaram, C.K.
    Journal: Micro and Nano Letters
    Year: 2020.

BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

Published on by Indian Scientist

Dr. BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

GMR Institute of Technology, India

Author Profile

Early Academic Pursuits 📚

Dr. Bappa Mondal’s academic journey is a testament to his unwavering dedication and passion for excellence. He began his educational voyage with stellar performance in his Madhyamik (10th) examination, securing an impressive 80.87% from the West Bengal Board of Secondary Education in 2007. This strong foundation was further fortified during his H.S. (10+2) studies under the West Bengal Council of Higher Secondary Education, where he achieved a commendable 64.60% in 2009.

His passion for Mechanical Engineering propelled him to pursue a B.Tech. in Mechanical Engineering from the West Bengal University of Technology, where he graduated in 2013 with an impressive 8.21/10 CGPA. His drive for academic excellence continued as he undertook an M.Tech. in Design & Manufacturing at the prestigious National Institute of Technology (NIT) Silchar, achieving a stellar 8.56/10 CGPA in 2016. Dr. Mondal’s thirst for knowledge culminated in earning a Ph.D. in Mechanical Engineering from NIT Silchar in 2021, where his research on “Numerical Investigation on Mixing Performance in Passive and Active Micromixers” demonstrated his innovative approach to solving complex engineering challenges. 🛠️

Professional Endeavors 🌟

Dr. Mondal’s professional career is equally illustrious. Currently serving as a Senior Assistant Professor in the Department of Mechanical Engineering at GMR Institute of Technology (Autonomous), Andhra Pradesh, he has been instrumental in shaping the academic futures of countless students. Since joining the institute on October 3, 2021, he has contributed significantly to its NBA-accredited programs. His annual CTC of ₹8.80 lakh reflects his value and expertise in the field. 💼

Dr. Mondal teaches a variety of undergraduate courses, including Design for Manufacturing, Strength of Materials, Kinematics of Machinery, Computer-Aided Machine Drawing, and Engineering Drawing. His ability to simplify complex concepts and his passion for teaching have earned him the admiration of his students and colleagues alike. ✨

Contributions and Research Focus 🔬

With over 5 years of dedicated research experience, Dr. Mondal has made significant contributions to the field of micromixers. His Ph.D. research at NIT Silchar focused on improving mixing performance in passive and active micromixers, an area critical for applications in microfluidics and bioengineering. His innovative numerical investigations have paved the way for advancements in designing more efficient micromixing systems. 🌐

Dr. Mondal’s research is characterized by its interdisciplinary approach, combining principles of fluid mechanics, computational modeling, and design optimization. His findings have been widely appreciated and serve as a valuable resource for both academia and industry. His passion for innovation extends beyond his Ph.D. work, as he continues to explore emerging trends in design and manufacturing technologies. 📈

Accolades and Recognition 🏆

Dr. Mondal’s commitment to academic and professional excellence has been recognized through several accolades. His impressive academic record and impactful research have earned him respect in the mechanical engineering community. As a faculty member at GMR Institute of Technology, he has been acknowledged for his teaching excellence and his ability to mentor students effectively. 🌟

His research contributions during his Ph.D. at NIT Silchar, an Institution of National Importance, underscore his expertise and the depth of his work. His ability to blend theoretical knowledge with practical applications sets him apart as a leading academician in his field. 🥇

Impact and Influence 🌍

Dr. Mondal’s work has a far-reaching impact, influencing not only his students but also the broader academic community. His focus on cutting-edge research in micromixers has implications for diverse fields, including biotechnology, pharmaceuticals, and chemical engineering. His teaching has inspired a generation of students to pursue careers in mechanical engineering, fostering innovation and creativity. 🌱

Through his dedication to excellence in both teaching and research, Dr. Mondal has established himself as a thought leader, driving progress in mechanical engineering education and research. His ability to bridge the gap between theoretical knowledge and practical applications ensures his influence will be felt for years to come. 🌟

Legacy and Future Contributions 🚀

As Dr. Mondal continues his journey, his legacy as a passionate educator and innovative researcher will undoubtedly grow. He aspires to make further contributions to the field of micromixers, developing advanced technologies that address real-world challenges. His commitment to mentoring young engineers ensures a lasting impact on the next generation of innovators. 🌠

Dr. Mondal’s journey exemplifies the power of perseverance, passion, and a relentless pursuit of excellence. With his strong foundation in academics, impactful research, and dedication to teaching, he is poised to leave an indelible mark on the field of mechanical engineering. His story serves as an inspiration for aspiring engineers, educators, and researchers alike. 🌟

Citations

A total of 371 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        371
  • h-index          09
  • i10-index       09

Notable Publications 

  • Title: Teaching Learning Optimization-Based Sliding Mode Control for Frequency Regulation in Microgrid
    Authors: A. Dev, B. Mondal, V. K. Verma, V. Kumar
    Journal: Electrical Engineering
    Year: 2024.
  • Title: Numerical and Experimental Investigations of Mixing Length in Square Wave Serpentine Micromixer with Obstacles
    Authors: B. Mondal, P. K. Patowari, S. Pati
    Journal: Microsystem Technologies
    Year: 2024.
  • Title: Techno-Societal 2018: Proceedings of the 2nd International Conference on Advanced Technologies for Societal Applications – Volume 2
    Authors: P. M. Pawar, B. P. Ronge, R. Balasubramaniam, A. S. Vibhute, S. S. Apte
    Publisher: Springer Nature
    Year: 2019.
  • Title: Enhancing Load Frequency Control and Automatic Voltage Regulation in Interconnected Power Systems Using the Walrus Optimization Algorithm
    Authors: M. B. M. B. T. Ark Dev, Kunalkumar Bhatt, Bappa Mondal, Vineet Kumar, Vineet Kumar
    Journal: Scientific Reports
    Year: 2024.
  • Title: Bridging the Industry–Academia Gap: An Experiential Learning for Engineering Students
    Authors: G. V. S. S. Sharma, A. L. Naidu, K. S. Rao, B. V. Suresh, P. Kumar, Y. Shireesha, …
    Journal: Journal of Formative Design in Learning
    Year: 2023.

Vikash Kumar | Mechanical Engineering | Best Researcher Award

Published on by Indian Scientist

Dr. Vikash Kumar | Mechanical Engineering | Best Researcher Award

National Institute of Technology, Calicut, India

Author Profile

Early Academic Pursuits

Dr. Vikash Kumar’s academic journey is a tale of perseverance and brilliance, laying the foundation for his illustrious career. Born and raised in India, he pursued his Bachelor of Technology (B.Tech) in Mechanical Engineering from Dr. B. C. Roy Engineering College, Durgapur (2009-2013). During this phase, his curiosity for engineering principles and problem-solving was evident through his thesis, “Study and Analysis of Cooling Tower” under the guidance of Dr. Pabitra Mondal, graduating with an impressive CPI of 8.08.

To further hone his skills, Dr. Kumar enrolled in the M.Tech program in Mechanical Engineering with a focus on Manufacturing at the prestigious Indian Institute of Technology (ISM) Dhanbad (2013-2015). His thesis, “Fiber Laser Welding of Thin Nickel Sheets in Air and Water Medium”, under Dr. Alok Kumar Das, showcased his ability to address complex challenges in laser welding technology. With an exceptional CPI of 9.52, his academic achievements during this phase reflected his dedication and precision.

Driven by a passion for innovation, he embarked on his doctoral studies at Indian Institute of Technology Guwahati (August 2015-May 2020). Under the mentorship of Prof. U. S. Dixit, he explored cutting-edge research in his thesis titled, “Modeling and Optimization of Single-Pass Laser Bending with Inverse Estimation”. This pivotal work not only demonstrated his expertise in advanced manufacturing techniques but also set the stage for impactful contributions to the field. 🌎

Professional Endeavors

Currently serving as an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology (NIT) Calicut, Dr. Kumar is deeply committed to fostering knowledge and innovation. His teaching philosophy emphasizes clarity, critical thinking, and hands-on learning, inspiring the next generation of engineers. 🎓

Through his tenure, Dr. Kumar has actively engaged in interdisciplinary projects, collaborative research, and curriculum development, aligning academic frameworks with the evolving demands of the manufacturing sector. His dedication to bridging the gap between theoretical understanding and practical application is evident in his students’ success. 🌟

Contributions and Research Focus

Dr. Kumar’s research primarily revolves around advanced manufacturing processes, with a special emphasis on laser-based manufacturing techniques, inverse modeling, and optimization methodologies. His pioneering work in laser bending has paved the way for innovations in manufacturing industries, providing sustainable and efficient solutions.

In his M.Tech thesis, he delved into fiber laser welding, exploring its applications in different media (air and water). This study has had implications for industries where precision welding of delicate materials is critical, such as aerospace and electronics. Similarly, his Ph.D. research on single-pass laser bending addresses challenges in precision forming, offering optimization strategies that enhance material performance while minimizing waste. ⚖️

Dr. Kumar is also an advocate of sustainable manufacturing practices and explores methodologies that integrate eco-friendly processes without compromising on efficiency and output. His work embodies a vision of innovation that aligns with global sustainability goals. ♻️

Accolades and Recognition

Dr. Kumar’s contributions have garnered recognition in academic and professional circles. His exemplary academic performance during his M.Tech and Ph.D. earned him accolades from his mentors and peers alike. As a researcher, he has presented papers at esteemed national and international conferences, earning appreciation for his insightful analyses and robust methodologies. ⚡

Beyond academia, he has collaborated with industrial partners, translating his research findings into practical applications, further amplifying the impact of his work. 🛠️

Impact and Influence

Dr. Kumar’s work has significantly influenced the field of laser-based manufacturing and optimization techniques, inspiring researchers and practitioners alike. His ability to combine rigorous theoretical frameworks with real-world applications has established him as a thought leader in his domain. 🌍

As a mentor, he has guided numerous students, fostering a culture of innovation and inquiry. Many of his mentees have gone on to pursue advanced studies and careers in mechanical engineering, further extending his influence. His teaching and research contributions resonate not just within his institution but also across the broader academic community. 🎓

Legacy and Future Contributions

With a strong foundation and an unwavering commitment to excellence, Dr. Vikash Kumar continues to shape the future of mechanical engineering. His ongoing projects in modeling and simulation, advanced manufacturing systems, and sustainable practices hold promise for groundbreaking advancements in the field.

As an Assistant Professor at NIT Calicut, he envisions transforming the department into a hub of innovation, fostering collaborations with global researchers, and mentoring students to achieve academic and professional excellence. His dedication to research, teaching, and community engagement positions him as a role model for aspiring engineers and educators. ✨

Citations

A total of 152 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        152
  • h-index          17
  • i10-index       08

Notable Publications 

  • Title: Selection and Optimization of Process Parameters During Multi-Pass Laser Bending Process
    Authors: Nikhil, P., Kumar, V., Arun Babu, K.
    Journal: Optics and Laser Technology
    Year: 2025.
  • Title: Optimization of Battery Tab Interconnects by Micro-TIG Welding Using Simulated Annealing Algorithm and Response Surface Method
    Authors: Sai, M. B., Mondal, S. C., Kumar, V.
    Journal: Smart Innovation, Systems, and Technologies
    Year: 2023.
  • Title: Modeling and Optimization of Laser Tube Bending Process
    Authors: Kumar, V., Anthikapalli, B., Pal, B., Kuriachen, B.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Directed Energy Deposition of Ni-Based Hard-Facing Alloy
    Authors: Kumar, V., Shrivastava, A., Chakraborty, S. S., Mukherjee, S.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Joining Techniques Like Welding in Lightweight Material Structures
    Authors: Kumar, V., Kumar, P., Das, A. K.
    Journal: Laser Applications in Manufacturing
    Year: 2023.

Mohd Arsalan | Material Science | Best Researcher Award

Published on by Indian Scientist

Dr. Mohd Arsalan | Material Science | Best Researcher Award

Aligarh Muslim University, India

Author Profile

Early Academic Pursuits 🌟

Mohd Arsalan’s academic journey began with an unwavering commitment to excellence in the field of chemistry. His passion for science was evident from his early years at Beenapara Inter College, Azamgarh, where he completed his matriculation in 2002, excelling in core subjects like Science, Mathematics, and languages such as Hindi, Urdu, and Arabic. Continuing his pursuit of knowledge, he graduated in 2004 with an intermediate education in Physics, Chemistry, and Biology, laying a strong foundation for his future endeavors.

His higher education took a remarkable turn when he joined the prestigious Aligarh Muslim University (AMU), known for its rich academic heritage. Arsalan earned his Bachelor of Science in Chemistry in 2007, marking the beginning of a transformative journey. This was followed by his Master of Science in Chemistry in 2009, during which he honed his expertise in theoretical and practical aspects of the discipline. His drive for academic excellence led him to complete an M.Phil in Chemistry in 2012 and culminated in his earning a Ph.D. in Chemistry in 2015 from the Department of Chemistry, AMU. His doctoral work stands as a testament to his intellectual rigor and dedication. 📚🎓

Professional Endeavors and Expertise 🚀

With a robust academic background, Mohd Arsalan embarked on a professional journey that merged research with practical applications. His expertise spans diverse domains, including polymeric-inorganic composite materials, membrane technology, and wastewater engineering. These areas reflect his commitment to addressing pressing environmental issues and advancing material science.

Arsalan’s research in water desalination and adsorption technology underscores his focus on solving global challenges related to water scarcity and pollution. His proficiency in synthesizing materials, characterizing them, and applying them in real-world scenarios has placed him at the forefront of innovation. His work often integrates environmental science with advanced separation processes, enabling efficient removal of organic and inorganic pollutants.

He is also adept at composite membrane formation and electrochemical studies, exploring chemical kinetics to drive solutions in wastewater management. Arsalan’s interdisciplinary approach ensures his contributions remain impactful and relevant. 🌍💧

Contributions and Research Focus 🔬

Arsalan has dedicated his career to advancing scientific understanding and developing sustainable technologies. His focus on material synthesis and the creation of composite membranes has led to significant advancements in membrane technology. These membranes are instrumental in purifying water, desalinating seawater, and treating wastewater.

Through meticulous research, he has developed innovative solutions for removing contaminants, including organic and inorganic pollutants, from water systems. His studies in chemical kinetics have provided valuable insights into the reaction mechanisms that drive these purification processes.

Arsalan’s expertise in wastewater engineering has also led to sustainable approaches for industrial waste management. His ability to blend theory with practical applications has made his work highly valuable in academia and industry. 🌱🔗

Accolades and Recognition 🏆

Throughout his career, Mohd Arsalan has been acknowledged for his contributions to science and technology. His research has received recognition from peers and institutions, earning him accolades for his innovative approaches to environmental challenges.

His ability to synthesize polymeric-inorganic composite materials with exceptional properties has been lauded for its practical applications in water and environmental engineering. Arsalan’s scholarly publications, invited talks, and conference presentations showcase his leadership in the scientific community. ✨📜

Impact and Influence 🌐

Arsalan’s work has had a far-reaching impact on academia and industry, influencing practices in water treatment and environmental management. His research has paved the way for cost-effective and sustainable solutions to water pollution, addressing a critical global concern.

By mentoring students and collaborating with other researchers, he continues to inspire the next generation of scientists. His interdisciplinary work bridges chemistry, environmental science, and engineering, ensuring its broad applicability and relevance. 🌟🤝

Legacy and Future Contributions 🔮

Mohd Arsalan’s legacy lies in his contributions to creating sustainable technologies that address environmental challenges. His work in wastewater engineering and membrane technology is a testament to his commitment to innovation.

Looking ahead, Arsalan aims to expand his research into cutting-edge areas like nanotechnology and renewable energy integration in water treatment processes. His vision for a sustainable future drives his relentless pursuit of knowledge and solutions. As an academic and professional, he continues to make a lasting impact on science and society. 🌍💡

In summary, Mohd Arsalan’s journey, marked by academic brilliance, innovative research, and impactful contributions, serves as an inspiration to aspiring scientists. His work is a beacon of hope for a sustainable future, addressing critical challenges with science and ingenuity. ✨

Citations

A total of 112 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        112
  • h-index          19
  • i10-index       06

Notable Publications 

  • Title: Synthesis of Polyvinyl Chloride-Based Zirconium Molybdophosphate Composite Membrane: An Assessment of Experimental and Theoretical Approaches through Electrochemical Parameters
    Authors: Zehra, A., Arsalan, M., Rafiuddin
    Journal: Journal of Membrane Science and Research, 2023.
  • Title: Preparation and characterization of polyvinyl chloride-based nickel phosphate ion-selective membrane and its application for removal of ions through water bodies
    Authors: Arsalan, M., Zehra, A., Khan, M.M.A., Rafiuddin
    Journal: Groundwater for Sustainable Development, 2019.
  • Title: Synthesis and characterization of Co₃(PO₄)₂ and Ni₃(PO₄)₂ composite membranes based on PVC: A comparative electrochemical study through aqueous electrolyte solutions
    Authors: Arsalan, M., Alam, F., Khan, I., Oves, M.
    Journal: Journal of Membrane Science and Research, 2018.

BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Published on by Indian Scientist

Prof Dr. BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Jadavpur University, India

Author Profile

Early Academic Pursuits 📚

Dr. Balaram Kundu’s academic journey is a testament to his unwavering commitment to excellence in mechanical engineering. His foundational years were marked by exemplary achievements, beginning with his Bachelor of Engineering (Mechanical Engineering) from the prestigious Regional Engineering College Durgapur (now NIT Durgapur) in 1993, where he graduated with first-class honors, achieving a remarkable 70.5%.

Driven by his passion for thermal engineering, Dr. Kundu pursued his Master of Engineering (Thermal Engineering) at Bengal Engineering College (now IIEST Shibpur) in 1995, securing first-class distinction with an impressive 77.8%. This academic rigor set the stage for his doctoral studies, and in February 2000, he earned his Doctor of Philosophy (Ph.D.) in Engineering from the esteemed Indian Institute of Technology (IIT) Kharagpur, India. His doctoral research laid a robust foundation for his future contributions to thermal engineering and mechanical systems.

Professional Endeavors 🏢

Dr. Kundu’s career trajectory reflects his dedication to teaching, research, and academic leadership. Beginning in April 1998 as a Reader in Mechanical Engineering at Jadavpur University, he quickly established himself as a skilled educator and researcher. His teaching journey progressed as follows:

  • Lecturer (Senior Scale) at Jadavpur University (2003–2008), where he expanded his teaching portfolio and research collaborations.
  • Lecturer at Jalpaiguri Government Engineering College (2008–2011), where he honed his mentoring abilities and inspired young engineers.
  • Promoted to Associate Professor in 2011, he continued his impactful work at Jadavpur University until his promotion to Professor in 2014.

At Jadavpur University, Dr. Kundu has been instrumental in shaping the Department of Mechanical Engineering, fostering innovation in teaching and mentoring a generation of aspiring engineers.

Contributions and Research Focus 🔬

Dr. Kundu’s research interests center on thermal engineering, focusing on topics like heat transfer, thermodynamics, and energy efficiency. His work bridges the theoretical and practical aspects of mechanical engineering, offering solutions to complex thermal problems.

Key highlights of his research:

  • Pioneering Work on Thermal Systems: His investigations into advanced thermal systems have contributed to sustainable energy practices.
  • Publications and Collaborations: Dr. Kundu has authored numerous papers in reputed journals, collaborating with researchers worldwide to advance knowledge in mechanical engineering.
  • Education and Innovation: His expertise in heat transfer and thermodynamics has influenced curriculum development, making education more relevant to industrial applications.

Accolades and Recognition 🏆

Dr. Kundu’s excellence has earned him several accolades throughout his career:

  • Recognition as a leading academic in mechanical engineering.
  • Invitations to conferences as a speaker and panelist, showcasing his thought leadership.
  • Esteemed reviewer for top-tier journals, contributing to academic rigor in his field.

Impact and Influence 🌍

Dr. Kundu’s influence extends beyond the classroom. His contributions have shaped the academic and professional lives of students, many of whom hold prominent positions in academia and industry. By integrating research insights into teaching, he has ensured that his students are equipped with the latest knowledge and skills.

Additionally, his commitment to mentoring young researchers has fostered a culture of innovation at Jadavpur University. His research findings have informed policy-making and industrial practices, addressing critical challenges in energy efficiency and mechanical systems.

Legacy and Future Contributions 🌟

Dr. Kundu’s legacy lies in his dedication to advancing mechanical engineering through research, teaching, and mentorship. Looking forward, he aims to:

  • Expand his research into sustainable energy systems and emerging technologies in thermal engineering.
  • Develop interdisciplinary collaborations to address global challenges in energy and environmental sustainability.
  • Continue mentoring the next generation of engineers and researchers, leaving an indelible mark on academia and industry.

With a career spanning decades, Dr. Kundu’s commitment to knowledge and innovation makes him a luminary in his field. His journey inspires students and professionals alike, exemplifying the values of hard work, curiosity, and lifelong learning. 🌟

Citations

A total of 2,867 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        2,867
  • h-index          140
  • i10-index       34

Notable Publications 

  • Title: A review of applications of green nanofluids for performance improvement of solar collectors
    Authors: Dewanjee, D., Kundu, B.
    Journal: Renewable Energy
    Year: 2025.
  • Title: Two-Dimensional Analysis of Absorber Plates in Solar Collectors with a Nonlinear Plate Temperature at the Tube Section
    Authors: Mahakud, J., Kundu, B.
    Journal: Energies
    Year: 2024.
  • Title: Experimental and meta-heuristic optimization for the highest thermo-hydraulic performance of a solar air heater with a V-notch pattern of hemispherical protrusions on absorber surfaces
    Authors: Mahto, P.K., Kundu, B.
    Journal: International Communications in Heat and Mass Transfer
    Year: 2024.
  • Title: Parametric optimization of solar air heaters with dimples on absorber plates using metaheuristic approaches
    Authors: Mahto, P.K., Das, P.P., Diyaley, S., Kundu, B.
    Journal: Applied Thermal Engineering
    Year: 2024.
  • Title: A Review of Artificial Intelligence Methods in Predicting Thermophysical Properties of Nanofluids for Heat Transfer Applications
    Authors: Basu, A., Saha, A., Banerjee, S., Roy, P.C., Kundu, B.
    Journal: Energies
    Year: 2024.

Vimal athithan | Materials Science | Innovation Award

Published on by Indian Scientist

Mr. Vimal athithan | Materials Science | Innovation Award

Kalasalingam academy of research and education, India

Author Profile

Early Academic Pursuits 🎓

Vimal Athithan’s academic journey is a testament to his unwavering commitment to education and personal growth. He began his foundational education at P.R. Siddha Naidu Memorial Matriculation, where he secured 71% in his Standard X examinations. His academic trajectory continued upward during his time at Hindusthan MHSS, Coimbatore, achieving 74% in Standard XII, showcasing his determination and diligence.

Driven by a passion for design and architecture, Vimal pursued a Bachelor of Architecture (B.Arch) at Ranganathan Architecture College, Coimbatore, where he secured a CGPA of 7.06/10. This degree laid the groundwork for his architectural expertise, equipping him with essential technical skills and a creative outlook. Building on this foundation, he enrolled in the Master of Architecture (M.Arch) program specializing in Advanced Design: Sustainable Architecture at the Karpagam Academy of Higher Education, Coimbatore. Graduating with distinction and a gold medal, Vimal earned a CGPA of 8.5/10, emphasizing his aptitude for sustainability and innovation in architecture.

His current academic pursuit, a Doctor of Philosophy (Ph.D.) at the Kalasalingam Academy of Research and Education, Viruthunagar, reflects his dedication to cutting-edge research. Focused on manufacturing composite bricks using neglected plastics, his Ph.D. work exemplifies his resolve to address global sustainability challenges.

Professional Endeavors 🏢

Vimal’s professional journey began immediately after completing his undergraduate studies. He first joined Space Edge Architects, Coimbatore, as a Software Trainer, where he honed his skills in drafting, 3D visualization, and imparting software training. During his tenure, he worked on residential, commercial, and product designs, contributing significantly to innovative walkthroughs and scheme drawings.

He later progressed to a pivotal role as a Junior Architect at Purism Architects, Coimbatore. In this role, Vimal demonstrated his versatility by engaging in diverse responsibilities, including:

  • Drafting and detailing scheme drawings, presentation materials, and cost estimations.
  • Producing high-quality 3D visualizations for various projects.
  • Overseeing site management, which involved site marking, inspections, and material evaluation.
  • Managing accounts and mentoring new recruits.

His experience in these roles reflects his adaptability, technical prowess, and leadership skills.

Contributions and Research Focus 🌍

Vimal’s research embodies his commitment to sustainability and innovation. His ongoing Ph.D. research focuses on developing composite bricks from neglected plastics, a project with significant environmental and industrial implications. By addressing plastic waste challenges, his work contributes to the circular economy and supports eco-friendly construction practices.

In addition to his academic pursuits, Vimal is currently working on patent registration for his composite brick design. This milestone underlines his innovative approach to solving real-world problems and reinforces his position as a thought leader in sustainable architecture.

Accolades and Recognition 🏅

Throughout his academic and professional journey, Vimal’s efforts have been met with recognition and accolades. His gold medal distinction during his M.Arch program highlights his academic excellence. Moreover, his contributions to sustainable architecture through research and practical application have earned him respect in both academic and professional circles.

His proficiency in software tools such as AutoCAD, Sketchup, Rhino, and Autodesk Sketchbook has also added to his professional acclaim, enabling him to bring creative and efficient solutions to architectural challenges.

Impact and Influence 🌟

Vimal’s work has left a lasting impression on both his peers and the architectural community. His contributions to sustainable construction are particularly impactful in the context of growing environmental concerns. His composite brick research aligns with global sustainability goals, providing practical solutions to reduce plastic waste and promote eco-friendly practices in the construction industry.

As a mentor and trainer, Vimal has also inspired budding architects by sharing his expertise in drafting, visualization, and software applications. His ability to manage projects while fostering the growth of others speaks volumes about his leadership and collaborative spirit.

Legacy and Future Contributions 🚀

Looking ahead, Vimal Athithan aspires to further his contributions to sustainable architecture and research. His work on composite bricks has the potential to revolutionize the construction industry, offering innovative alternatives to traditional materials. By securing patents for his designs, he is poised to make significant advancements in eco-friendly construction technologies.

Vimal’s commitment to education, research, and sustainability ensures that his legacy will be one of innovation, inspiration, and environmental stewardship. His journey serves as a beacon for aspiring architects, emphasizing the importance of balancing creativity with responsibility in shaping a better future.

In conclusion, Vimal Athithan’s story is one of relentless pursuit of knowledge, professional excellence, and meaningful impact. His dedication to sustainability and innovation, coupled with his ability to inspire and lead, ensures that his contributions will resonate for generations to come. 🌱✨

Praveer Sihota | Materials Science | Best Researcher Award

Published on by Indian Scientist

Dr. Praveer Sihota | Materials Science | Best Researcher Award

University Medical Center Hamburg, Germany, India

Author Profile

Early Academic Pursuits 🎓✨

Dr. Praveer Sihota’s journey into the fascinating realm of biomedical engineering began with a robust academic foundation. Completing his Bachelor of Engineering in Biomedical Engineering from Rajiv Gandhi Technical University, Bhopal (2006-2010), he achieved a commendable score of 73.5%. Building on this, he pursued a Master of Technology in Biomedical Engineering at MIT, Manipal University, Karnataka (2011-2013), earning an impressive CGPA of 8.14/10.

His academic progression culminated in a Ph.D. in Biomedical Engineering from the prestigious Indian Institute of Technology Ropar (2015-2021). His doctoral research not only expanded the boundaries of knowledge in bone characterization but also earned him the Best PhD Thesis of the Year 2021, a testament to his groundbreaking work. 📜🏆

Professional Endeavors 💼🔬

Dr. Sihota’s professional journey reflects his dedication to exploring biomedical engineering and bone health. Early in his career, he honed his skills as an M.Tech Trainee in Bioinstrumentation at CSIR-CSIO Chandigarh (2012-2013). He then advanced to roles such as Research Fellow in Biostatistics at IIT Mandi (2013-2014) and in Endocrinology at PGIMER Chandigarh (2015).

Notably, as a Project Assistant at IIT Ropar (2021), he delved into bone mechanical testing. Currently, Dr. Sihota holds the prestigious Alexander von Humboldt Fellowship as a Post-doctoral Research Fellow in the Department of Osteology and Biomechanics (IOBM), University Medical Center Hamburg-Eppendorf, Germany (2022-2025). His work focuses on the multi-scale assessment of bone quality, furthering insights into metabolic bone diseases. 🌍🔍

Contributions and Research Focus 🧬🛠️

Dr. Sihota’s research delves into the multiscale characterization of bone, emphasizing metabolic disorders like type 2 diabetes, obesity, and osteoporosis. His studies on the effects of advanced glycation end products and glucocorticoids reveal their impact on bone material and mechanical properties, mineralization, collagen quality, and skeletal fragility.

By leveraging clinical cohorts and animal models, Dr. Sihota investigates the underlying mechanisms of pathological bone changes, offering critical insights into fracture risks. His work stands as a beacon for developing diagnostic tools and treatments to combat fragility fractures, enhancing the quality of life for individuals with metabolic bone diseases. 🩺🦵

Accolades and Recognition 🌟🏅

Dr. Sihota’s exemplary contributions have garnered accolades, with his Best PhD Thesis of the Year 2021 highlighting his innovative approach and dedication. Being selected as an Alexander von Humboldt Fellow is another significant milestone, reflecting his status as a leading researcher in his field.

Impact and Influence 🌍📈

Dr. Sihota’s work has left a profound impact on both academic and clinical realms. By integrating engineering principles with medical science, he addresses critical challenges in bone health. His research findings have implications for clinicians, researchers, and healthcare policymakers, shaping strategies to prevent and manage bone fragility.

Legacy and Future Contributions 🔮🚀

Dr. Sihota’s legacy is rooted in his commitment to advancing biomedical engineering. Looking ahead, he aims to expand the frontiers of bone health research, exploring new diagnostic tools and innovative treatments for metabolic bone diseases. His vision encompasses fostering interdisciplinary collaboration and mentoring the next generation of researchers.

With a career characterized by excellence, innovation, and compassion, Dr. Praveer Sihota continues to inspire and contribute significantly to the global scientific community. His journey exemplifies the power of perseverance and intellectual curiosity, paving the way for a healthier future. 🌟👨‍🔬

Citations

A total of 315 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         315
  • h-index           22
  • i10-index        10

Notable Publications 

  • Bone-seeking tumor cells alter bone material quality parameters on the nanoscale in mice
    • Authors: Krug, J., Plumeyer, C., Davydok, A., Fiedler, I.A.K., Jähn-Rickert, K.
    • Journal: Biomaterials Advances
    • Year: 2025.
  • Osteomodulin deficiency in mice causes a specific reduction of transversal cortical bone size
    • Authors: Zhao, W., von Kroge, S., Jadzic, J., Schinke, T., Yorgan, T.A.
    • Journal: Journal of Bone and Mineral Research
    • Year: 2024.
  • Lower microhardness along with less heterogeneous mineralization in the femoral neck of individuals with type 2 diabetes mellitus indicates higher fracture risk
    • Authors: Cirovic, A., Schmidt, F.N., Vujacic, M., Busse, B., Milovanovic, P.
    • Journal: JBMR Plus
    • Year: 2024.
  • Type 2 diabetes alters the viscoelastic behavior and macromolecular composition of vertebra
    • Authors: Mehta, D., Sihota, P., Tikoo, K., Kumar, S., Kumar, N.
    • Journal: Bone Reports
    • Year: 2023.
  • The multiscale characterization and constitutive modeling of healthy and type 2 diabetes mellitus Sprague Dawley rat skin
    • Authors: Dwivedi, K.K., Lakhani, P., Sihota, P., Kumar, S., Kumar, N.
    • Journal: Acta Biomaterialia
    • Year: 2023.