BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

Posted on by ScienceFather

Dr. BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

GMR Institute of Technology, India

Author Profile

Early Academic Pursuits 📚

Dr. Bappa Mondal’s academic journey is a testament to his unwavering dedication and passion for excellence. He began his educational voyage with stellar performance in his Madhyamik (10th) examination, securing an impressive 80.87% from the West Bengal Board of Secondary Education in 2007. This strong foundation was further fortified during his H.S. (10+2) studies under the West Bengal Council of Higher Secondary Education, where he achieved a commendable 64.60% in 2009.

His passion for Mechanical Engineering propelled him to pursue a B.Tech. in Mechanical Engineering from the West Bengal University of Technology, where he graduated in 2013 with an impressive 8.21/10 CGPA. His drive for academic excellence continued as he undertook an M.Tech. in Design & Manufacturing at the prestigious National Institute of Technology (NIT) Silchar, achieving a stellar 8.56/10 CGPA in 2016. Dr. Mondal’s thirst for knowledge culminated in earning a Ph.D. in Mechanical Engineering from NIT Silchar in 2021, where his research on “Numerical Investigation on Mixing Performance in Passive and Active Micromixers” demonstrated his innovative approach to solving complex engineering challenges. 🛠️

Professional Endeavors 🌟

Dr. Mondal’s professional career is equally illustrious. Currently serving as a Senior Assistant Professor in the Department of Mechanical Engineering at GMR Institute of Technology (Autonomous), Andhra Pradesh, he has been instrumental in shaping the academic futures of countless students. Since joining the institute on October 3, 2021, he has contributed significantly to its NBA-accredited programs. His annual CTC of ₹8.80 lakh reflects his value and expertise in the field. 💼

Dr. Mondal teaches a variety of undergraduate courses, including Design for Manufacturing, Strength of Materials, Kinematics of Machinery, Computer-Aided Machine Drawing, and Engineering Drawing. His ability to simplify complex concepts and his passion for teaching have earned him the admiration of his students and colleagues alike. ✨

Contributions and Research Focus 🔬

With over 5 years of dedicated research experience, Dr. Mondal has made significant contributions to the field of micromixers. His Ph.D. research at NIT Silchar focused on improving mixing performance in passive and active micromixers, an area critical for applications in microfluidics and bioengineering. His innovative numerical investigations have paved the way for advancements in designing more efficient micromixing systems. 🌐

Dr. Mondal’s research is characterized by its interdisciplinary approach, combining principles of fluid mechanics, computational modeling, and design optimization. His findings have been widely appreciated and serve as a valuable resource for both academia and industry. His passion for innovation extends beyond his Ph.D. work, as he continues to explore emerging trends in design and manufacturing technologies. 📈

Accolades and Recognition 🏆

Dr. Mondal’s commitment to academic and professional excellence has been recognized through several accolades. His impressive academic record and impactful research have earned him respect in the mechanical engineering community. As a faculty member at GMR Institute of Technology, he has been acknowledged for his teaching excellence and his ability to mentor students effectively. 🌟

His research contributions during his Ph.D. at NIT Silchar, an Institution of National Importance, underscore his expertise and the depth of his work. His ability to blend theoretical knowledge with practical applications sets him apart as a leading academician in his field. 🥇

Impact and Influence 🌍

Dr. Mondal’s work has a far-reaching impact, influencing not only his students but also the broader academic community. His focus on cutting-edge research in micromixers has implications for diverse fields, including biotechnology, pharmaceuticals, and chemical engineering. His teaching has inspired a generation of students to pursue careers in mechanical engineering, fostering innovation and creativity. 🌱

Through his dedication to excellence in both teaching and research, Dr. Mondal has established himself as a thought leader, driving progress in mechanical engineering education and research. His ability to bridge the gap between theoretical knowledge and practical applications ensures his influence will be felt for years to come. 🌟

Legacy and Future Contributions 🚀

As Dr. Mondal continues his journey, his legacy as a passionate educator and innovative researcher will undoubtedly grow. He aspires to make further contributions to the field of micromixers, developing advanced technologies that address real-world challenges. His commitment to mentoring young engineers ensures a lasting impact on the next generation of innovators. 🌠

Dr. Mondal’s journey exemplifies the power of perseverance, passion, and a relentless pursuit of excellence. With his strong foundation in academics, impactful research, and dedication to teaching, he is poised to leave an indelible mark on the field of mechanical engineering. His story serves as an inspiration for aspiring engineers, educators, and researchers alike. 🌟

Citations

A total of 371 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        371
  • h-index          09
  • i10-index       09

Notable Publications 

  • Title: Teaching Learning Optimization-Based Sliding Mode Control for Frequency Regulation in Microgrid
    Authors: A. Dev, B. Mondal, V. K. Verma, V. Kumar
    Journal: Electrical Engineering
    Year: 2024.
  • Title: Numerical and Experimental Investigations of Mixing Length in Square Wave Serpentine Micromixer with Obstacles
    Authors: B. Mondal, P. K. Patowari, S. Pati
    Journal: Microsystem Technologies
    Year: 2024.
  • Title: Techno-Societal 2018: Proceedings of the 2nd International Conference on Advanced Technologies for Societal Applications – Volume 2
    Authors: P. M. Pawar, B. P. Ronge, R. Balasubramaniam, A. S. Vibhute, S. S. Apte
    Publisher: Springer Nature
    Year: 2019.
  • Title: Enhancing Load Frequency Control and Automatic Voltage Regulation in Interconnected Power Systems Using the Walrus Optimization Algorithm
    Authors: M. B. M. B. T. Ark Dev, Kunalkumar Bhatt, Bappa Mondal, Vineet Kumar, Vineet Kumar
    Journal: Scientific Reports
    Year: 2024.
  • Title: Bridging the Industry–Academia Gap: An Experiential Learning for Engineering Students
    Authors: G. V. S. S. Sharma, A. L. Naidu, K. S. Rao, B. V. Suresh, P. Kumar, Y. Shireesha, …
    Journal: Journal of Formative Design in Learning
    Year: 2023.

Vikash Kumar | Mechanical Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Vikash Kumar | Mechanical Engineering | Best Researcher Award

National Institute of Technology, Calicut, India

Author Profile

Early Academic Pursuits

Dr. Vikash Kumar’s academic journey is a tale of perseverance and brilliance, laying the foundation for his illustrious career. Born and raised in India, he pursued his Bachelor of Technology (B.Tech) in Mechanical Engineering from Dr. B. C. Roy Engineering College, Durgapur (2009-2013). During this phase, his curiosity for engineering principles and problem-solving was evident through his thesis, “Study and Analysis of Cooling Tower” under the guidance of Dr. Pabitra Mondal, graduating with an impressive CPI of 8.08.

To further hone his skills, Dr. Kumar enrolled in the M.Tech program in Mechanical Engineering with a focus on Manufacturing at the prestigious Indian Institute of Technology (ISM) Dhanbad (2013-2015). His thesis, “Fiber Laser Welding of Thin Nickel Sheets in Air and Water Medium”, under Dr. Alok Kumar Das, showcased his ability to address complex challenges in laser welding technology. With an exceptional CPI of 9.52, his academic achievements during this phase reflected his dedication and precision.

Driven by a passion for innovation, he embarked on his doctoral studies at Indian Institute of Technology Guwahati (August 2015-May 2020). Under the mentorship of Prof. U. S. Dixit, he explored cutting-edge research in his thesis titled, “Modeling and Optimization of Single-Pass Laser Bending with Inverse Estimation”. This pivotal work not only demonstrated his expertise in advanced manufacturing techniques but also set the stage for impactful contributions to the field. 🌎

Professional Endeavors

Currently serving as an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology (NIT) Calicut, Dr. Kumar is deeply committed to fostering knowledge and innovation. His teaching philosophy emphasizes clarity, critical thinking, and hands-on learning, inspiring the next generation of engineers. 🎓

Through his tenure, Dr. Kumar has actively engaged in interdisciplinary projects, collaborative research, and curriculum development, aligning academic frameworks with the evolving demands of the manufacturing sector. His dedication to bridging the gap between theoretical understanding and practical application is evident in his students’ success. 🌟

Contributions and Research Focus

Dr. Kumar’s research primarily revolves around advanced manufacturing processes, with a special emphasis on laser-based manufacturing techniques, inverse modeling, and optimization methodologies. His pioneering work in laser bending has paved the way for innovations in manufacturing industries, providing sustainable and efficient solutions.

In his M.Tech thesis, he delved into fiber laser welding, exploring its applications in different media (air and water). This study has had implications for industries where precision welding of delicate materials is critical, such as aerospace and electronics. Similarly, his Ph.D. research on single-pass laser bending addresses challenges in precision forming, offering optimization strategies that enhance material performance while minimizing waste. ⚖️

Dr. Kumar is also an advocate of sustainable manufacturing practices and explores methodologies that integrate eco-friendly processes without compromising on efficiency and output. His work embodies a vision of innovation that aligns with global sustainability goals. ♻️

Accolades and Recognition

Dr. Kumar’s contributions have garnered recognition in academic and professional circles. His exemplary academic performance during his M.Tech and Ph.D. earned him accolades from his mentors and peers alike. As a researcher, he has presented papers at esteemed national and international conferences, earning appreciation for his insightful analyses and robust methodologies. ⚡

Beyond academia, he has collaborated with industrial partners, translating his research findings into practical applications, further amplifying the impact of his work. 🛠️

Impact and Influence

Dr. Kumar’s work has significantly influenced the field of laser-based manufacturing and optimization techniques, inspiring researchers and practitioners alike. His ability to combine rigorous theoretical frameworks with real-world applications has established him as a thought leader in his domain. 🌍

As a mentor, he has guided numerous students, fostering a culture of innovation and inquiry. Many of his mentees have gone on to pursue advanced studies and careers in mechanical engineering, further extending his influence. His teaching and research contributions resonate not just within his institution but also across the broader academic community. 🎓

Legacy and Future Contributions

With a strong foundation and an unwavering commitment to excellence, Dr. Vikash Kumar continues to shape the future of mechanical engineering. His ongoing projects in modeling and simulation, advanced manufacturing systems, and sustainable practices hold promise for groundbreaking advancements in the field.

As an Assistant Professor at NIT Calicut, he envisions transforming the department into a hub of innovation, fostering collaborations with global researchers, and mentoring students to achieve academic and professional excellence. His dedication to research, teaching, and community engagement positions him as a role model for aspiring engineers and educators. ✨

Citations

A total of 152 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        152
  • h-index          17
  • i10-index       08

Notable Publications 

  • Title: Selection and Optimization of Process Parameters During Multi-Pass Laser Bending Process
    Authors: Nikhil, P., Kumar, V., Arun Babu, K.
    Journal: Optics and Laser Technology
    Year: 2025.
  • Title: Optimization of Battery Tab Interconnects by Micro-TIG Welding Using Simulated Annealing Algorithm and Response Surface Method
    Authors: Sai, M. B., Mondal, S. C., Kumar, V.
    Journal: Smart Innovation, Systems, and Technologies
    Year: 2023.
  • Title: Modeling and Optimization of Laser Tube Bending Process
    Authors: Kumar, V., Anthikapalli, B., Pal, B., Kuriachen, B.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Directed Energy Deposition of Ni-Based Hard-Facing Alloy
    Authors: Kumar, V., Shrivastava, A., Chakraborty, S. S., Mukherjee, S.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Joining Techniques Like Welding in Lightweight Material Structures
    Authors: Kumar, V., Kumar, P., Das, A. K.
    Journal: Laser Applications in Manufacturing
    Year: 2023.

BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Posted on by ScienceFather

Prof Dr. BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Jadavpur University, India

Author Profile

Early Academic Pursuits 📚

Dr. Balaram Kundu’s academic journey is a testament to his unwavering commitment to excellence in mechanical engineering. His foundational years were marked by exemplary achievements, beginning with his Bachelor of Engineering (Mechanical Engineering) from the prestigious Regional Engineering College Durgapur (now NIT Durgapur) in 1993, where he graduated with first-class honors, achieving a remarkable 70.5%.

Driven by his passion for thermal engineering, Dr. Kundu pursued his Master of Engineering (Thermal Engineering) at Bengal Engineering College (now IIEST Shibpur) in 1995, securing first-class distinction with an impressive 77.8%. This academic rigor set the stage for his doctoral studies, and in February 2000, he earned his Doctor of Philosophy (Ph.D.) in Engineering from the esteemed Indian Institute of Technology (IIT) Kharagpur, India. His doctoral research laid a robust foundation for his future contributions to thermal engineering and mechanical systems.

Professional Endeavors 🏢

Dr. Kundu’s career trajectory reflects his dedication to teaching, research, and academic leadership. Beginning in April 1998 as a Reader in Mechanical Engineering at Jadavpur University, he quickly established himself as a skilled educator and researcher. His teaching journey progressed as follows:

  • Lecturer (Senior Scale) at Jadavpur University (2003–2008), where he expanded his teaching portfolio and research collaborations.
  • Lecturer at Jalpaiguri Government Engineering College (2008–2011), where he honed his mentoring abilities and inspired young engineers.
  • Promoted to Associate Professor in 2011, he continued his impactful work at Jadavpur University until his promotion to Professor in 2014.

At Jadavpur University, Dr. Kundu has been instrumental in shaping the Department of Mechanical Engineering, fostering innovation in teaching and mentoring a generation of aspiring engineers.

Contributions and Research Focus 🔬

Dr. Kundu’s research interests center on thermal engineering, focusing on topics like heat transfer, thermodynamics, and energy efficiency. His work bridges the theoretical and practical aspects of mechanical engineering, offering solutions to complex thermal problems.

Key highlights of his research:

  • Pioneering Work on Thermal Systems: His investigations into advanced thermal systems have contributed to sustainable energy practices.
  • Publications and Collaborations: Dr. Kundu has authored numerous papers in reputed journals, collaborating with researchers worldwide to advance knowledge in mechanical engineering.
  • Education and Innovation: His expertise in heat transfer and thermodynamics has influenced curriculum development, making education more relevant to industrial applications.

Accolades and Recognition 🏆

Dr. Kundu’s excellence has earned him several accolades throughout his career:

  • Recognition as a leading academic in mechanical engineering.
  • Invitations to conferences as a speaker and panelist, showcasing his thought leadership.
  • Esteemed reviewer for top-tier journals, contributing to academic rigor in his field.

Impact and Influence 🌍

Dr. Kundu’s influence extends beyond the classroom. His contributions have shaped the academic and professional lives of students, many of whom hold prominent positions in academia and industry. By integrating research insights into teaching, he has ensured that his students are equipped with the latest knowledge and skills.

Additionally, his commitment to mentoring young researchers has fostered a culture of innovation at Jadavpur University. His research findings have informed policy-making and industrial practices, addressing critical challenges in energy efficiency and mechanical systems.

Legacy and Future Contributions 🌟

Dr. Kundu’s legacy lies in his dedication to advancing mechanical engineering through research, teaching, and mentorship. Looking forward, he aims to:

  • Expand his research into sustainable energy systems and emerging technologies in thermal engineering.
  • Develop interdisciplinary collaborations to address global challenges in energy and environmental sustainability.
  • Continue mentoring the next generation of engineers and researchers, leaving an indelible mark on academia and industry.

With a career spanning decades, Dr. Kundu’s commitment to knowledge and innovation makes him a luminary in his field. His journey inspires students and professionals alike, exemplifying the values of hard work, curiosity, and lifelong learning. 🌟

Citations

A total of 2,867 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        2,867
  • h-index          140
  • i10-index       34

Notable Publications 

  • Title: A review of applications of green nanofluids for performance improvement of solar collectors
    Authors: Dewanjee, D., Kundu, B.
    Journal: Renewable Energy
    Year: 2025.
  • Title: Two-Dimensional Analysis of Absorber Plates in Solar Collectors with a Nonlinear Plate Temperature at the Tube Section
    Authors: Mahakud, J., Kundu, B.
    Journal: Energies
    Year: 2024.
  • Title: Experimental and meta-heuristic optimization for the highest thermo-hydraulic performance of a solar air heater with a V-notch pattern of hemispherical protrusions on absorber surfaces
    Authors: Mahto, P.K., Kundu, B.
    Journal: International Communications in Heat and Mass Transfer
    Year: 2024.
  • Title: Parametric optimization of solar air heaters with dimples on absorber plates using metaheuristic approaches
    Authors: Mahto, P.K., Das, P.P., Diyaley, S., Kundu, B.
    Journal: Applied Thermal Engineering
    Year: 2024.
  • Title: A Review of Artificial Intelligence Methods in Predicting Thermophysical Properties of Nanofluids for Heat Transfer Applications
    Authors: Basu, A., Saha, A., Banerjee, S., Roy, P.C., Kundu, B.
    Journal: Energies
    Year: 2024.

Dr. Vivek Arya | Engineering | Best Researcher Award

Posted on by ScienceFather

Assoc Prof Dr. Dr. Vivek Arya | Engineering | Best Researcher Award

Chandigarh University Punjab, India

Author Profile

Early Academic Pursuits 📚

Dr. Vivek Arya embarked on his academic journey with a focus on Electronics and Communication Engineering (ECE), an area in which he has not only excelled but also contributed significantly to the field. After completing his schooling, he pursued a Bachelor of Technology (B.Tech) in Electronics and Communication Engineering at F.E.T., GKV Haridwar, where he laid the foundation for his technical expertise. Graduating in 2010 with a commendable 68.49%, Dr. Arya’s thirst for knowledge did not stop there. He further advanced his studies by pursuing a Master of Technology (M.Tech) in Electronics and Communication Engineering at Amity University, Gurugram. Here, his academic brilliance shone through as he secured the Gold Medal with an impressive 89.4% and ranked first in his cohort. 🏅This was followed by his research endeavors leading to a Doctorate in the same field. Dr. Arya earned his Ph.D. in 2023 from the Faculty of Engineering and Technology (F.E.T.) at GKV Haridwar, marking a significant milestone in his career. His doctoral research, which received recognition for its quality and depth, solidified his position as an emerging expert in his field. He also successfully cleared the UGC NET in Electronics Science in June 2014, further affirming his academic prowess. 🔬

Professional Endeavors 👨‍🏫

Dr. Arya’s professional journey is defined by his roles as an educator, mentor, and researcher. His academic qualifications have allowed him to take on various significant roles in the educational sector. As a faculty member, Dr. Arya has shared his deep knowledge and expertise in Electronics and Communication Engineering with the next generation of engineers and researchers. His passion for teaching and his dedication to fostering student success has made him a respected figure at his academic institution. 💼Dr. Arya’s focus on continuous improvement and excellence in teaching has helped bridge the gap between theoretical learning and practical applications. As a mentor, he has encouraged his students to pursue innovative research projects and take bold steps toward real-world problem-solving. His role has extended beyond just imparting knowledge; he has instilled a spirit of curiosity and critical thinking in his students. 🌟

Contributions and Research Focus 🧠

Dr. Arya’s research contributions lie primarily in the Electronics and Communication domain, with a special focus on innovative systems and technologies that drive the modern world. His work has explored numerous areas including signal processing, communication systems, and network security, aiming to optimize and develop more efficient solutions for complex problems.His research not only includes theoretical analysis but also practical implementations that enhance system reliability and efficiency. Through his publications, Dr. Arya has made significant strides in communications technologies and has contributed to making these systems more robust and adaptive in a rapidly evolving technological landscape. As a result, his work has implications for industries ranging from telecommunications to defense systems. 📡Dr. Arya’s Ph.D. research further extended his contributions, where he worked on cutting-edge topics that bridge gaps in existing technologies. His doctoral thesis was met with praise for its originality and practical applications in communication systems. This research is expected to influence the development of next-generation communication technologies, positioning Dr. Arya as a thought leader in his field.

Accolades and Recognition 🏆

Dr. Arya’s academic excellence has earned him multiple accolades throughout his educational and professional journey. The most prominent of these was the Gold Medal for his outstanding performance in the M.Tech. program, securing first place among his peers. This recognition highlights his relentless pursuit of academic excellence.His Ph.D. dissertation has also been well-received by scholars and practitioners, underlining his ability to tackle complex issues in electronics and communication engineering. Being recognized by the UGC NET further solidified his reputation as an expert in the field. These awards and recognitions stand testament to Dr. Arya’s commitment to pushing the boundaries of knowledge and contributing meaningfully to the academic community. 🥇

Impact and Influence 🌍

Dr. Arya’s influence extends far beyond the classroom. His research has had a direct impact on engineering practices, especially in areas like communication systems, signal processing, and electronic circuit design. His work has helped shape industry standards and influenced the way future technologies will be developed and implemented.Dr. Arya’s teaching and research methodologies have left a lasting impact on his students, many of whom have gone on to achieve success in the industry and academia. He continues to inspire a new generation of engineers with his passion for technology, his thirst for knowledge, and his unwavering commitment to excellence.

Legacy and Future Contributions 🔮

Looking ahead, Dr. Arya is poised to make even greater contributions to the world of electronics and communication. With his extensive academic and professional experience, he is set to engage in more innovative research and collaborations that aim to solve complex global challenges. His future work will likely involve advancements in wireless communication, 5G networks, and advanced signal processing techniques. Dr. Arya’s legacy will be defined not only by his technical achievements but by his ability to inspire and lead the next generation of engineers toward creating impactful solutions for society. 🌐Through his research, teaching, and mentorship, Dr. Vivek Arya is creating a strong foundation for the future of Electronics and Communication Engineering. As a thought leader, his journey is only just beginning, and the best is yet to come.

Citations

A total of 283 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         283
  • h-index           38
  • i10-index        11

Notable Publications 

  • A novel broadband and high-gain compact annular ring microstrip antenna for satellite applications
    • Authors: Arya, V., Garg, T.
    • Journal: Frequenz
    • Year: 2024.
  • Realization of high-speed OWC links by incorporating hybrid OCDMA and MDM scheme for HAP-to-satellite applications
    • Authors: Kumari, M., Arya, V.
    • Journal: Optical and Quantum Electronics
    • Year: 2024.
  • Wheel-based 5G fronthaul/backhaul hybrid MDM-NGPON/FSO system under Gamma-Gamma turbulence and weather effects
    • Authors: Kumari, M., Arya, V.
    • Journal: International Journal of Communication Systems
    • Year: 2024.
  • Historical development of passive optical network (PON): A review
    • Authors: Arya, V., Kumari, M., Rana, A.K.
    • Journal: Journal of Optical Communications
    • Year: 2024.
  • Realization of 4 × 10 Gbps FSO-WDM System Incorporating Flattening Filter
    • Authors: Arya, V., Kumari, M., Singh, A., Kisku, A.
    • Conference: Proceedings of International Conference on Communication, Computer Sciences, and Engineering (IC3SE)
    • Year: 2024.

Sarva Ruvinigya Somanshu | Engineering | Best Researcher Award

Posted on by ScienceFather

Mr.Sarva Ruvinigya Somanshu | Engineering | Best Researcher Award

NIT Patna, India

Author Profile

Early Academic Pursuits 📚

Sarva Ruvinigya Somanshu’s academic journey began with a firm foundation in electrical and electronics engineering. After completing his Class 12th in 2007 with an aggregate of 68.40%, Sarva pursued a Bachelor’s degree in Electrical and Electronics Engineering (B.Tech) at Ideal Institute of Technology, Ghaziabad, where he graduated with an impressive aggregate of 70.40% in 2013. This early academic success was a sign of his commitment and interest in the field. Recognizing his passion for the subject, Sarva continued his studies by enrolling in a Master’s program in Power Electronics and Drives (M.Tech) at Kamla Nehru Institute of Technology, Sultanpur, from 2014 to 2016. He graduated with an aggregate of 73.50%. This advanced degree further fueled his desire to contribute to the field of electrical engineering, particularly in power electronics, a domain that plays a pivotal role in the development of energy-efficient systems and drives.

Professional Endeavors 💼

Sarva Ruvinigya Somanshu’s career trajectory is a blend of industry experience and academic contributions. He began his professional career with a year-long contract-based position at BALCO, Chhattisgarh, where he worked as a site engineer in collaboration with TELECON SYSTEMS, Noida. During this time, Sarva gained valuable hands-on experience, working on real-world electrical systems, site management, and troubleshooting. This role provided him with the technical acumen necessary to transition into teaching and academia.In his academic career, Sarva served as an Assistant Professor and Head of the Electrical Engineering Department at Prasad Institute of Technology, Jaunpur, for 2.5 years. His leadership skills and dedication to education made him an ideal fit for this role. Afterward, he further honed his academic prowess by joining KIPM College of Engineering and Technology (KIPM-CET), Gida Gorakhpur, where he served as an Assistant Professor in the Electrical Engineering Department for 3 years. Sarva also took on additional responsibilities, serving as the Innovation Cell In-charge and a member of the Digital Promotion Cell, where he was instrumental in driving innovative projects and digital advancements within the college. His role at KIPM-CET was particularly impactful, as he laid the groundwork for the establishment of a start-up, “SPARS Techno Solution Pvt Ltd,” providing an entrepreneurial edge to his academic pursuits.

Contributions and Research Focus 🔬

Sarva’s research interests are primarily centered around power electronics and its applications in renewable energy systems, particularly solar energy. As a Research Scholar at the National Institute of Technology Patna (NIT Patna), Sarva is delving into the challenges and advancements in power systems, particularly focusing on energy-efficient solutions. His M.Tech research in Power Electronics and Drives has equipped him with the knowledge necessary to work on cutting-edge solutions for power management, energy conversion, and the integration of renewable energy sources into existing power grids. With expertise in MATLAB, solar emulators, embedded systems, and PLC, Sarva has actively contributed to the design and development of solar energy systems and other energy-efficient technologies.

Accolades and Recognition 🏆

Throughout his academic and professional career, Sarva has been recognized for his technical proficiency, leadership, and contributions to education. His role as Innovation Cell In-charge at KIPM-CET garnered attention, especially for his efforts in fostering an environment of creativity and technological advancement. Furthermore, his establishment of “SPARS Techno Solution Pvt Ltd” at KIPM-CET reflects his entrepreneurial spirit and dedication to bringing engineering innovations to life. His ongoing research at NIT Patna is poised to further establish his credibility as a thought leader in power electronics and renewable energy systems.

Impact and Influence 🌟

Sarva Ruvinigya Somanshu’s professional journey is a testament to his dedication to engineering education and innovation. His contributions to the development of power systems, particularly in the context of renewable energy, have the potential to influence the direction of sustainable energy technologies. By merging his industry experience with academia, Sarva has become a mentor for young engineers, guiding them toward innovative solutions for real-world problems. His academic leadership and involvement in technological innovation have made a significant impact at both KIPM-CET and NIT Patna.

Legacy and Future Contributions 🔮

Sarva’s future contributions are expected to be transformative, particularly in the field of power electronics and renewable energy. His research into solar energy systems and energy-efficient technologies is likely to pave the way for more sustainable power solutions in the future. As a founder of a start-up, Sarva is well-positioned to bridge the gap between academia and industry, fostering collaborations that will drive technological advancements. In the coming years, his contributions are expected to extend to practical applications in energy systems and smart grid technologies, which will not only help to address the global energy crisis but also inspire future engineers to follow in his footsteps.

Notable Publications 

  • Title: Enhancing Disturbance Rejection in Boost Converter for CPL: A Controller Design Approach with Partial Pole Placement and Approximate Model Matching
    Authors: SR Somanshu, MN Anwar, R Kumar
    Journal: ISA Transactions
    Year: 2024.
  • Title: IMC-PI control-based solar PV output voltage regulation for battery charging
    Authors: SR Somanshu, N Anwar, R Kumar
    Journal: Electrical Engineering
    Year: 2024.
  • Title: PI controller with decoupler design for SIDO buck converter based on frequency response approximation
    Authors: MK Ram, SR Somanshu, MN Anwar
    Conference: IEEE 1st Industrial Electronics Society Annual On-Line Conference
    Year: 2022.
  • Title: Internal Model Control Scheme Based PV Battery Charging System Utilizing Buck Converter for EV Application
    Authors: SR Somanshu, MK Ram, MN Anwar, R Kumar
    Conference: IEEE 1st Industrial Electronics Society Annual On-Line Conference
    Year: 2022.
  • Title: Artificial Intelligence Applications for Machinery Fault Diagnosis: A Comprehensive Review
    Authors: RKS Sanjay Kumar, Ankit Kumar Srivastava, Sarva Ruvinigya Somanshu, Rishi Kumar
    Journal: TEST Engineering and Management
    Year: 2020.

Dipanjan Mukherjee | Engineering | Innovative Solutions Award

Posted on by ScienceFather

Dr. Dipanjan Mukherjee | Engineering | Innovative Solutions Award

National Institute of Technology Silchar, India

Author Profile

Early Academic Pursuits 📘

Dr. Mukherjee embarked on his academic journey in West Bengal, India. In 2009, he completed his secondary education with the West Bengal Board of Secondary Education (WBBSE) and earned an impressive 88.87%. Continuing his academic commitment, he graduated from the West Bengal Council of Higher Secondary Education (WBCHSE) in 2009, achieving 86.40%. Motivated by a vision to enhance infrastructure and public safety, Dr. Mukherjee pursued a B.Tech in Civil Engineering from the West Bengal University of Technology (WBUT), completing the program in 2013 with a CGPA of 9.18/10. This foundational education provided him with a strong base in civil engineering principles.Following his bachelor’s degree, Dr. Mukherjee advanced to an M.Tech program in Transportation Engineering at the National Institute of Technology (NIT) Silchar. His performance was stellar, as he graduated with a CGPA of 9.08/10 in 2015. Driven by a passion for research and innovation, he joined the Indian Institute of Technology (IIT) Kharagpur, where he pursued and completed his Ph.D. in Transportation Engineering. Between 2015 and 2021, his research focused on critical areas of road safety evaluation in developing countries, helping shape his future work.

Professional Endeavors and Industry Experience 🏢

With a mix of academic and professional roles, Dr. Mukherjee has gained extensive practical insights that complement his research. After earning his Ph.D., he joined the SaveLIFE Foundation, a leading organization in India focused on road safety, as a Team Leader in Road Safety and Audits. Here, he led key projects from April 2021 to August 2022, applying his expertise in crash data analysis and road safety measures to real-world contexts. His contributions included performing safety audits, evaluating accident hotspots, and collaborating with stakeholders to implement corrective measures. His tenure at SaveLIFE Foundation allowed him to apply theoretical knowledge in practical scenarios, advancing his expertise in transportation engineering. 🚧In October 2022, Dr. Mukherjee took on the role of Assistant Professor (Grade I) in the Department of Civil Engineering at Thapar Institute of Engineering and Technology, Patiala, Punjab. He educated the next generation of civil engineers while leading research projects focused on road safety and sustainable transportation. In December 2023, he joined the National Institute of Technology Silchar as an Assistant Professor (Grade II), focusing on his specialization in Traffic Engineering and Road Safety, thus marking a new chapter in his academic career.

Contributions and Research Focus 📊

Dr. Mukherjee’s research focuses on road safety evaluation in developing countries, with a particular interest in analyzing the factors that contribute to traffic accidents and designing solutions that can enhance safety. His work is broad yet precise, covering areas like:

  • Traffic Engineering and Road Safety: Dr. Mukherjee examines accident data to identify patterns and predict high-risk zones, guiding policies and interventions that can minimize accidents.
  • Crash Data Analysis and Accident Modeling: By analyzing large datasets on crash incidents, Dr. Mukherjee seeks to understand the underlying causes and trends in traffic accidents, enabling better traffic management.
  • Non-Motorized Transportation: Dr. Mukherjee advocates for safer pedestrian and cyclist infrastructure, crucial in promoting sustainable urban transportation.
  • Transportation Planning and Travel Behavior: His studies help shape effective transportation policies that can accommodate growth while ensuring the safety of all road users.
  • Pavement Material and Design: His work extends to researching materials and designs that enhance the durability and safety of roads in varying climates and traffic conditions.

His research on these issues has made a difference by providing policymakers and city planners with insights into implementing safer and more efficient transportation systems. 🛣️

Accolades and Recognition 🏅

Dr. Mukherjee’s work has not gone unrecognized. From his academic achievements, including high CGPAs and successful completions at top institutions, to his industry accolades, his dedication to his field has received both academic and public appreciation. His role as Team Leader for the SaveLIFE Foundation underscores his practical expertise, making him a respected name in transportation engineering in India. Additionally, his involvement in influential projects at both Thapar Institute and NIT Silchar showcases his continuous contribution to academia, enhancing students’ learning experiences and inspiring future engineers. 🌟

Impact and Influence 🌍

Dr. Mukherjee’s work has a transformative impact on the civil engineering landscape, particularly in the realm of traffic safety. His research findings have become valuable resources for city planners, government bodies, and non-profit organizations dedicated to reducing road fatalities and enhancing commuter experiences. His contributions are significant in shaping transportation policies in India, particularly in developing safe, efficient, and sustainable road networks. His teachings at institutions like Thapar Institute and NIT Silchar are also shaping future generations of engineers, instilling in them the knowledge and skills needed to address real-world challenges. 📈

Legacy and Future Contributions 🔍

Dr. Mukherjee’s journey from a young engineering student to a respected academic and industry leader has inspired many. His dedication to road safety research, teaching, and industry engagement highlights his commitment to reducing accident rates and promoting sustainable urban infrastructure. Looking ahead, Dr. Mukherjee aims to expand his research to include more advanced accident prediction models and simulations that could prevent accidents before they happen. He also intends to continue his focus on non-motorized transport, promoting environmentally friendly modes of transportation that are safe and accessible.As he continues his work, Dr. Mukherjee is poised to leave an indelible mark on civil engineering, ensuring that future transportation systems are safe, efficient, and inclusive. His research, advocacy, and academic contributions signify a lasting legacy that will benefit both his students and the broader community. 🌐

Citations

A total of 237 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         237
  • h-index           11
  • i10-index        8

Notable Publications 

  • Title: Identification of Factors Influencing Pedestrian Perceived Safety and Satisfaction Level Using Ordered Logit Models in an Indian Midsized City
    Authors: Mukherjee, D., Kumar, A.
    Journal: International Journal of Transport Development and Integration
    Year: 2024.
  • Title: What Affects Pedestrian Crossing Difficulty at Urban Intersections in a Developing Country?
    Authors: Mukherjee, D., Mitra, S.
    Journal: IATSS Research
    Year: 2022.
  • Title: Proactive Pedestrian Safety Evaluation at Urban Road Network Level, an Experience in Kolkata City, India
    Authors: Mukherjee, D., Mitra, S.
    Journal: International Journal of Injury Control and Safety Promotion
    Year: 2022.
  • Title: Pedestrian Safety Analysis of Urban Intersections in Kolkata, India Using a Combined Proactive and Reactive Approach
    Authors: Mukherjee, D., Mitra, S.
    Journal: Journal of Transportation Safety and Security
    Year: 2022.
  • Title: Investigating the Fatal Pedestrian Crash Occurrence in Urban Setup in a Developing Country Using Multiple-Risk Source Model
    Authors: Mukherjee, D., Mitra, S.
    Journal: Accident Analysis and Prevention
    Year: 2021.

Varun Sabu Sam | Engineering | Emerging Scientist Award

Posted on by ScienceFather

Mr. Varun Sabu Sam | Engineering | Emerging Scientist Award

Karunya University, India

Author Profile

Early Academic Pursuits 🎓

Varun Sabu Sam embarked on his academic journey with a clear inclination toward engineering, particularly structural engineering. His educational background provided him with foundational knowledge in design and analysis, a crucial skill set for aspiring engineers. This early phase was marked by a continuous pursuit of knowledge, as he attended various webinars, seminars, and conferences, all of which contributed to his growing interest in structural engineering and materials science. His commitment to academia allowed him to stay updated on the latest trends and advancements, especially in fields like cold-formed steel structures and flexural behavior.

Professional Endeavors 🛠️

With over three years of experience as a researcher and engineer, Varun has already made significant strides in his career. Working on dynamic and challenging projects, he demonstrated an ability to apply theoretical knowledge to practical situations, bridging the gap between academia and industry. His expertise in Finite Element Method (FEM) modeling and steel simulations stands as a testament to his dedication and technical prowess. Not only is he proficient in industry-standard software for design and analysis, but he has also consistently worked to improve his technical skills to meet project demands. His professional growth has been supported by his flexibility and adaptability to various work environments, making him a valuable asset to any organization.

Contributions and Research Focus 🔬

Varun’s research interests are both innovative and crucial in the field of structural engineering. His focus on cold-formed steel structures reveals his dedication to enhancing the safety and efficiency of modern construction materials. Cold-formed steel is increasingly popular in construction due to its lightweight and high-strength properties. Varun’s research has delved into understanding the flexural behavior of this material, assessing how it responds under different loads and conditions. His expertise extends to parametric analysis and behavioral studies of cold-formed steel at elevated temperatures, which is critical in understanding how materials perform under extreme conditions, such as fires or high-stress scenarios.His contributions in FEM modeling are particularly noteworthy, as they involve complex simulations that predict how materials behave under various loads and configurations. Through these simulations, Varun can analyze parameters like load-bearing capacity and stress distribution, helping to refine design strategies and improve material safety. His ability to utilize FEM modeling and software tools highlights his dedication to producing high-quality research that meets the demands of modern engineering.

Accolades and Recognition 🏆

Though relatively early in his career, Varun’s consistent efforts and expertise have already garnered recognition. His active participation in industry-related webinars, seminars, and conferences has not only expanded his knowledge but has also allowed him to establish valuable connections within the field. Such recognition has encouraged him to pursue projects that address real-world engineering challenges, demonstrating his commitment to impacting the structural engineering domain positively.

Impact and Influence 🌍

Varun’s work in cold-formed steel structures and FEM modeling has implications for both the engineering and construction industries. By exploring the behavior of cold-formed steel at elevated temperatures, he contributes to the development of safer, more resilient building materials. His research is especially relevant in a world that demands sustainable and durable infrastructure to withstand changing environmental conditions. Varun’s expertise in steel simulations and parametric analysis adds significant value, as it allows for the optimization of materials, contributing to cost-effective and efficient structural designs.

Legacy and Future Contributions 🌟

Varun’s journey is only beginning, but his aspirations are clear. He aims to continue contributing to structural engineering by delving deeper into material resilience and safety. His work on cold-formed steel and flexural behavior positions him as a valuable researcher focused on tackling some of the industry’s most pressing challenges. As he continues to refine his skills and gain experience, Varun is committed to leaving a lasting legacy of innovation and impact. By applying his knowledge and technical expertise to real-world projects, he hopes to inspire future engineers to prioritize safety, resilience, and sustainability.

Citations

A total of 14 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        14
  • h-index           3
  • i10-index        0

Notable Publications 

  1. Influence of Elevated Temperature on Buckling Capacity of Mild Steel-Based Cold-Formed Steel Column Sections–Experimental Investigation and Finite Element Modelling
    Authors: V. Sabu Sam, M.S. Adarsh, G.R. Lyngdoh, G.W.K. Marak, N. Anand, K. Al-Jabri, …
    Journal: Journal of Structural Fire Engineering, 15(3), 314-337
    Year: 2024.
  2. Investigation on Residual Mechanical Properties of Galvanized Iron Cold-Formed Steel Sections Exposed to Elevated Temperatures
    Authors: V.S. Sam, N. Anand, G.W.K. Marak, G.R. Lyngdoh, J. Alengaram, D. Andrushia
    Journal: Electronic Journal of Structural Engineering, 24(1), 53-59
    Year: 2024.
  3. Flexural Behavior of Galvanized Iron-Based Cold-Formed Steel Back-to-Back Built-Up Beams at Elevated Temperatures
    Authors: V.S. Sam, A. Nammalvar, D. Andrushia, B.G.A. Gurupatham, K. Roy
    Journal: Buildings, 14(8), Article 2456
    Year: 2024.
  4. Influence of Section Profiles on Flexural Behavior of Unsymmetrical Cold-Formed Steel Sections–Analytical and Numerical Investigation
    Authors: V. Sabu Sam, N. Anand, R. Kumar, D. Andrushia
    Journal: Journal of Structural Fire Engineering
    Year: 2024.
  5. Flexural Behavior of Cold-Formed Mild Steel Beams with Web Holes Exposed to High Temperature: Analytical and Experimental Investigation
    Authors: V.S. Sam, N. Anand, M.Z. Naser
    Journal: Innovative Infrastructure Solutions, 9(10), Article 1-23
    Year: 2024.

SANTHOSH KUMAR BUDDEPU | Engineering | Best Researcher Award

Posted on by ScienceFather

Mr. SANTHOSH KUMAR BUDDEPU | Engineering | Best Researcher Award

AMRITA VISHWA VIDYAPEETHAM, AMARAVATI -India

Author Profile

📚 Early Academic Pursuits

Santhosh Kumar Buddepu’s journey in academia began with a strong foundation in the sciences. His early academic achievements are marked by exceptional performance, starting with his 10th standard education at ZPHS, Siripuram, where he secured a First Class with an impressive 92.8%. This solidified his path towards higher education in the technical field. Continuing his pursuit of excellence, Santhosh completed his Intermediate education with a First Class (94.8%) from Sri Chaitanya Junior College in 2006, specializing in Mathematics, Physics, and Chemistry (MPC).Santhosh’s commitment to the field of Electronics and Communication Engineering became evident during his undergraduate studies at JNTUK, Kakinada. He earned a B.Tech degree with Distinction, achieving a commendable 72.88%. His academic prowess did not go unnoticed, and he pursued his M.Tech in Digital Electronics and Communication Systems (DECS) at JNTUK, Kakinada, where he graduated with Distinction (80.8%) in 2013.Santhosh’s thirst for knowledge and his passion for research led him to pursue a Ph.D. in Signal and Image Processing at the prestigious National Institute of Technology (NIT), Rourkela, Odisha. His doctoral research focused on the application of machine learning and deep learning techniques for subsurface object detection and classification, showcasing his dedication to advancing the field.

🧑‍🏫 Professional Endeavors

Santhosh Kumar Buddepu’s professional journey is characterized by his commitment to teaching and research. With over six years of teaching experience, he has contributed significantly to the academic growth of several institutions in Andhra Pradesh. His career as an Assistant Professor began at Sri Venkateswara College of Engineering & Technology in May 2010, where he served until November 2011. He then joined Shri Vishnu Engineering College for Women, where he continued to impart knowledge and mentor students from December 2013 to May 2015.Santhosh’s dedication to education and his desire to foster innovation in engineering students led him to join Lakireddy Bali Reddy College of Engineering, where he served as an Assistant Professor from June 2015 to October 2016. His expertise in signal and image processing, combined with his ability to inspire students, made him a valuable asset to these institutions. His final teaching tenure was at GMR Institute of Technology, where he contributed from November 2016 to July 2019.

🛠️ Contributions and Research Focus

Santhosh Kumar Buddepu’s research interests are primarily centered on Signal and Image Processing, with a particular focus on Machine and Deep Intelligence. His Ph.D. research, titled “Subsurface Object Detection and Classification using Machine/Deep Intelligence Algorithms,” is a testament to his expertise in this field. The research aimed to enhance the accuracy and efficiency of subsurface object detection, with a specific focus on improving ground-penetrating radar (GPR) data interpretation.Santhosh’s work involved the development and implementation of deep learning-based algorithms for clutter removal and feature extraction in GPR data. These advancements significantly improved the clarity and quality of GPR scans, making it easier to detect and classify subsurface objects, including landmines and unexploded ordnance (UXO). His research demonstrated strong potential for practical applications in areas such as landmine detection, contributing to safer environments in affected regions.In addition to his Ph.D. research, Santhosh has undertaken various academic projects throughout his career. His M.Tech project, “A Joint Encryption and Watermarking System for Verifying the Reliability of Images,” combined chaotic mapping, encryption algorithms, and watermarking techniques to protect the integrity of images. His B.Tech project, “FPGA Based Design and Implementation of Non-Sinusoidal Reactive Power,” showcased his expertise in FPGA design, highlighting his skills in synthesis, mapping, and functional verification.

🏆 Accolades and Recognition

Santhosh Kumar Buddepu’s dedication to research and teaching has earned him recognition in the academic community. His doctoral research at NIT Rourkela, focusing on subsurface object detection, has been well-received for its innovative approach and practical applications. His contributions to the field of Signal and Image Processing have solidified his reputation as a knowledgeable and passionate educator and researcher.

🌍 Impact and Influence

Santhosh’s work has had a significant impact on the field of subsurface object detection, particularly in the area of landmine and UXO detection. The deep learning algorithms he developed have the potential to save lives by improving the accuracy and reliability of GPR data interpretation. His research has paved the way for further advancements in this critical field, influencing future studies and applications in both academia and industry.In addition to his research contributions, Santhosh has influenced countless students through his teaching. His ability to simplify complex concepts and foster a passion for learning has left a lasting impact on his students, many of whom have gone on to pursue successful careers in engineering and technology.

🏅 Legacy and Future Contributions

As Santhosh Kumar Buddepu continues his academic and research journey, his legacy as a dedicated educator and innovative researcher is firmly established. His work in Signal and Image Processing, particularly in the application of machine and deep learning techniques, will continue to influence future research and practical applications in various fields.Looking ahead, Santhosh aims to further explore the intersection of artificial intelligence and engineering, with a focus on developing cutting-edge technologies that address real-world challenges. His commitment to advancing knowledge and his passion for teaching will undoubtedly lead to further contributions to the academic community and beyond.In conclusion, Santhosh Kumar Buddepu’s career is a testament to his dedication, innovation, and impact in the fields of engineering and education. His work continues to inspire and influence, leaving a lasting legacy for future generations of engineers and researchers.

Citations

A total of 8 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         8
  • h-index           5
  • i10-index        2

Notable Publications

  • Title: Enhancing Subsurface Exploration: A Comprehensive Review of Advanced Clutter Removal Techniques for Ground Penetrating Radar Imaging
    Authors: B.S. Kumar, S. Baraha, A.K. Sahoo, S. Maiti
    Journal: Measurement: Journal of the International Measurement Confederation
    Year: 2025.
  • Title: Integrated Feature Investigation and Classification Methods for Discrimination of Subsurface Objects in GPR Imagery
    Authors: B.S. Kumar, A.K. Sahoo, S. Maiti
    Journal: IEEE Sensors Journal
    Year: 2024.
  • Title: Clutter and Random Noise Elimination Based on Eigen Images and Curvelet Transform
    Authors: B.S. Kumar, A.K. Sahoo, S. Maiti
    Conference: 3rd International Conference on Range Technology, ICORT 2023
    Year: 2023.
  • Title: A Practical GPR Imaging Scheme for Buried Objects
    Authors: S. Tarai, S.L. Panda, B.S. Kumar, A.K. Sahoo, S. Maiti
    Conference: 2021 IEEE MTT-S International Microwave and RF Conference, IMARC 2021
    Year: 2021.
  • Title: Removal of Clutter and Random Noise for GPR Images
    Authors: B.S. Kumar, A.K. Sahoo, S. Maiti
    Conference: Proceedings of the 2021 IEEE 18th India Council International Conference, INDICON 2021
    Year: 2021.

Suchismita Satapathy | Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Suchismita Satapathy - Kalinga Institute of Industrial Technology - Engineering🏆

Dr. Suchismita Satapathy : Engineering

Professional Profiles:

Early Academic Pursuits :

She embarked on her academic journey with a Bachelor's in Mechanical Engineering from IGIT Sarang, followed by a Master's in Industrial Engineering and culminating in a Ph.D. from NIT Rourkela, showcasing a strong foundation in mechanical and industrial disciplines.

Professional Endeavors :

As an Associate Professor in the School of Mechanical Engineering at KIIT University, She has demonstrated prowess in academia, contributing significantly to the field. Her roles span teaching, research, and mentoring, with her dedication evident in guiding Ph.D. candidates, supervising numerous master's theses, and editing special issues for reputed journals.

Contributions and Research Focus in Engineering :

Her research focuses on multifaceted areas encompassing industrial engineering, supply chain management, waste management, and decision-making techniques. Her publications, which include authored and edited books along with contributions to journals, highlight her expertise in sustainable supply chain management, waste management, and operational research.

Accolades and Recognition :

Her academic contributions have earned her recognition, evident in her membership in professional societies like IAENG, IET, ISTE, and the Indian Science Congress. Her patents and published works underscore her innovative contributions to academia and industry.

Impact and Influence :

Her influence extends through her mentoring and guidance, shaping the academic and research paths of budding scholars. Her endeavors in addressing crucial issues such as waste management and sustainable practices in various industries showcase a commitment to making impactful contributions to societal challenges.

Legacy and Future Contributions :

Her legacy lies in her comprehensive contributions to academia, particularly in the domains of industrial engineering and sustainable practices. Her future contributions are anticipated to further advance research in decision-making methodologies, supply chain sustainability, and waste management, continuing to influence and inspire future generations in the field of mechanical engineering.

Notable Publications :

Citations:

A total of 1257 citations for his publications, demonstrating the impact and recognition of her research within the academic community.

  • Citations    657             600
  • h-index       13               13
  • i10-index     22              20

Anil Kumar | Engineering | Best Researcher Award

Posted on by ScienceFather

Anil Kumar | Best Researcher Award Winner 2023🏆

Dr. H.M. Anil Kumar : Engineering

Dr. H.M. Anil Kumar is an Assistant Professor at at Ballari Institute of Technology & Management in Karnataka, India.

Congratulations, Dr. H.M. Anil Kumar, on winning the esteemed Best Researcher Award from Research! Your dedication, innovative research, and scholarly contributions have truly made a significant impact in your field. Your commitment to advancing knowledge and pushing the boundaries of research is commendable. Here's to your continued success in shaping the future of academia and making invaluable contributions to your field. Well done!

He is a seasoned academician and researcher with extensive experience in the field of Mechanical Engineering. Currently holding the position of Associate Professor at Ballari Institute of Technology & Management in Karnataka, India, he has an academic journey spanning over 20 years. His educational background is robust, culminating in a Ph.D. from Visvesvaraya Technological University, with his doctoral thesis focusing on the study of Friction Stir Welding (FSW) of dissimilar aluminum alloys. His academic tenure includes teaching roles at various prestigious institutions like SRM University in Chennai, S.A. Engineering College, and others, where he has significantly contributed to shaping future engineers in subjects encompassing mechanical engineering, computer-aided design, materials science, and quality management. His research contributions are notable, evident in several published papers in esteemed journals and presentations in numerous national and international conferences, exploring diverse aspects of friction stir welding, concurrent engineering, and materials science. He continues to dedicate himself to the pursuit of excellence in education and research, consistently striving to impart knowledge and contribute innovative insights to the field of mechanical engineering.

Professional Profiles:

Early Academic Pursuits :

He commenced his academic journey by acquiring a Bachelor's in Industrial & Production Engineering (B.E) from Vijayanagar Engineering College, Ballari, affiliated with Gulbarga University, in 1999. Subsequently, he pursued a Master's in Computer Integrated Manufacturing (M.E) from CEG, Chennai, Anna University, Chennai, in 2008. His academic voyage culminated with a Ph.D. from Visvesvaraya Technological University (VTU), Belagavi, in 2020, focusing on "Study on Friction stir welding of dissimilar aluminium AA5083-H111 and AA6082-T6 alloys."

Professional Endeavors :

He possesses an extensive teaching experience of 20 years. He has held diverse teaching positions, including Associate Professor at Ballari Institute of Technology & Management, Ballari, since August 2016, and Assistant Professor roles in various prestigious institutions across Chennai and Vadapalni.

Contributions and Research Focus :

His scholarly contributions are evident through his published papers in esteemed journals, encompassing topics like "Friction Stir Welding," "Mechanical Studies," and "Concurrent Engineering in Product Development." He has actively participated in and presented research papers at numerous national and international conferences, seminars, and workshops.

Accolades and Recognition :

His contributions have been recognized through publications in various reputed journals like Elsevier, Springer, IOP Conference Series, and more. Additionally, his participation and presentation of papers at academic conferences underline his engagement in the academic community.

Impact and Influence :

His research in the domain of Friction Stir Welding, Mechanical Studies, and Engineering practices signifies his commitment to enhancing the field's understanding and applications.His active involvement in conferences and seminars showcases his dedication to sharing and disseminating knowledge in the academic sphere.

Legacy and Future Contributions :

His comprehensive academic journey, coupled with his substantial teaching and research expertise, positions him as a significant contributor to the fields of Mechanical Engineering, Friction Stir Welding, and Product Development. His continued endeavors and scholarly pursuits are anticipated to further enrich and advance these domains.

Notable Publications :

Citations:

A total of  181 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations    92    89
  • h-index       5       5
  • i10-index    3     3