BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

Posted on by ScienceFather

Dr. BAPPA MONDAL | Mechanical Engineering | Research Innovation Award

GMR Institute of Technology, India

Author Profile

Early Academic Pursuits 📚

Dr. Bappa Mondal’s academic journey is a testament to his unwavering dedication and passion for excellence. He began his educational voyage with stellar performance in his Madhyamik (10th) examination, securing an impressive 80.87% from the West Bengal Board of Secondary Education in 2007. This strong foundation was further fortified during his H.S. (10+2) studies under the West Bengal Council of Higher Secondary Education, where he achieved a commendable 64.60% in 2009.

His passion for Mechanical Engineering propelled him to pursue a B.Tech. in Mechanical Engineering from the West Bengal University of Technology, where he graduated in 2013 with an impressive 8.21/10 CGPA. His drive for academic excellence continued as he undertook an M.Tech. in Design & Manufacturing at the prestigious National Institute of Technology (NIT) Silchar, achieving a stellar 8.56/10 CGPA in 2016. Dr. Mondal’s thirst for knowledge culminated in earning a Ph.D. in Mechanical Engineering from NIT Silchar in 2021, where his research on “Numerical Investigation on Mixing Performance in Passive and Active Micromixers” demonstrated his innovative approach to solving complex engineering challenges. 🛠️

Professional Endeavors 🌟

Dr. Mondal’s professional career is equally illustrious. Currently serving as a Senior Assistant Professor in the Department of Mechanical Engineering at GMR Institute of Technology (Autonomous), Andhra Pradesh, he has been instrumental in shaping the academic futures of countless students. Since joining the institute on October 3, 2021, he has contributed significantly to its NBA-accredited programs. His annual CTC of ₹8.80 lakh reflects his value and expertise in the field. 💼

Dr. Mondal teaches a variety of undergraduate courses, including Design for Manufacturing, Strength of Materials, Kinematics of Machinery, Computer-Aided Machine Drawing, and Engineering Drawing. His ability to simplify complex concepts and his passion for teaching have earned him the admiration of his students and colleagues alike. ✨

Contributions and Research Focus 🔬

With over 5 years of dedicated research experience, Dr. Mondal has made significant contributions to the field of micromixers. His Ph.D. research at NIT Silchar focused on improving mixing performance in passive and active micromixers, an area critical for applications in microfluidics and bioengineering. His innovative numerical investigations have paved the way for advancements in designing more efficient micromixing systems. 🌐

Dr. Mondal’s research is characterized by its interdisciplinary approach, combining principles of fluid mechanics, computational modeling, and design optimization. His findings have been widely appreciated and serve as a valuable resource for both academia and industry. His passion for innovation extends beyond his Ph.D. work, as he continues to explore emerging trends in design and manufacturing technologies. 📈

Accolades and Recognition 🏆

Dr. Mondal’s commitment to academic and professional excellence has been recognized through several accolades. His impressive academic record and impactful research have earned him respect in the mechanical engineering community. As a faculty member at GMR Institute of Technology, he has been acknowledged for his teaching excellence and his ability to mentor students effectively. 🌟

His research contributions during his Ph.D. at NIT Silchar, an Institution of National Importance, underscore his expertise and the depth of his work. His ability to blend theoretical knowledge with practical applications sets him apart as a leading academician in his field. 🥇

Impact and Influence 🌍

Dr. Mondal’s work has a far-reaching impact, influencing not only his students but also the broader academic community. His focus on cutting-edge research in micromixers has implications for diverse fields, including biotechnology, pharmaceuticals, and chemical engineering. His teaching has inspired a generation of students to pursue careers in mechanical engineering, fostering innovation and creativity. 🌱

Through his dedication to excellence in both teaching and research, Dr. Mondal has established himself as a thought leader, driving progress in mechanical engineering education and research. His ability to bridge the gap between theoretical knowledge and practical applications ensures his influence will be felt for years to come. 🌟

Legacy and Future Contributions 🚀

As Dr. Mondal continues his journey, his legacy as a passionate educator and innovative researcher will undoubtedly grow. He aspires to make further contributions to the field of micromixers, developing advanced technologies that address real-world challenges. His commitment to mentoring young engineers ensures a lasting impact on the next generation of innovators. 🌠

Dr. Mondal’s journey exemplifies the power of perseverance, passion, and a relentless pursuit of excellence. With his strong foundation in academics, impactful research, and dedication to teaching, he is poised to leave an indelible mark on the field of mechanical engineering. His story serves as an inspiration for aspiring engineers, educators, and researchers alike. 🌟

Citations

A total of 371 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        371
  • h-index          09
  • i10-index       09

Notable Publications 

  • Title: Teaching Learning Optimization-Based Sliding Mode Control for Frequency Regulation in Microgrid
    Authors: A. Dev, B. Mondal, V. K. Verma, V. Kumar
    Journal: Electrical Engineering
    Year: 2024.
  • Title: Numerical and Experimental Investigations of Mixing Length in Square Wave Serpentine Micromixer with Obstacles
    Authors: B. Mondal, P. K. Patowari, S. Pati
    Journal: Microsystem Technologies
    Year: 2024.
  • Title: Techno-Societal 2018: Proceedings of the 2nd International Conference on Advanced Technologies for Societal Applications – Volume 2
    Authors: P. M. Pawar, B. P. Ronge, R. Balasubramaniam, A. S. Vibhute, S. S. Apte
    Publisher: Springer Nature
    Year: 2019.
  • Title: Enhancing Load Frequency Control and Automatic Voltage Regulation in Interconnected Power Systems Using the Walrus Optimization Algorithm
    Authors: M. B. M. B. T. Ark Dev, Kunalkumar Bhatt, Bappa Mondal, Vineet Kumar, Vineet Kumar
    Journal: Scientific Reports
    Year: 2024.
  • Title: Bridging the Industry–Academia Gap: An Experiential Learning for Engineering Students
    Authors: G. V. S. S. Sharma, A. L. Naidu, K. S. Rao, B. V. Suresh, P. Kumar, Y. Shireesha, …
    Journal: Journal of Formative Design in Learning
    Year: 2023.

Vikash Kumar | Mechanical Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Vikash Kumar | Mechanical Engineering | Best Researcher Award

National Institute of Technology, Calicut, India

Author Profile

Early Academic Pursuits

Dr. Vikash Kumar’s academic journey is a tale of perseverance and brilliance, laying the foundation for his illustrious career. Born and raised in India, he pursued his Bachelor of Technology (B.Tech) in Mechanical Engineering from Dr. B. C. Roy Engineering College, Durgapur (2009-2013). During this phase, his curiosity for engineering principles and problem-solving was evident through his thesis, “Study and Analysis of Cooling Tower” under the guidance of Dr. Pabitra Mondal, graduating with an impressive CPI of 8.08.

To further hone his skills, Dr. Kumar enrolled in the M.Tech program in Mechanical Engineering with a focus on Manufacturing at the prestigious Indian Institute of Technology (ISM) Dhanbad (2013-2015). His thesis, “Fiber Laser Welding of Thin Nickel Sheets in Air and Water Medium”, under Dr. Alok Kumar Das, showcased his ability to address complex challenges in laser welding technology. With an exceptional CPI of 9.52, his academic achievements during this phase reflected his dedication and precision.

Driven by a passion for innovation, he embarked on his doctoral studies at Indian Institute of Technology Guwahati (August 2015-May 2020). Under the mentorship of Prof. U. S. Dixit, he explored cutting-edge research in his thesis titled, “Modeling and Optimization of Single-Pass Laser Bending with Inverse Estimation”. This pivotal work not only demonstrated his expertise in advanced manufacturing techniques but also set the stage for impactful contributions to the field. 🌎

Professional Endeavors

Currently serving as an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology (NIT) Calicut, Dr. Kumar is deeply committed to fostering knowledge and innovation. His teaching philosophy emphasizes clarity, critical thinking, and hands-on learning, inspiring the next generation of engineers. 🎓

Through his tenure, Dr. Kumar has actively engaged in interdisciplinary projects, collaborative research, and curriculum development, aligning academic frameworks with the evolving demands of the manufacturing sector. His dedication to bridging the gap between theoretical understanding and practical application is evident in his students’ success. 🌟

Contributions and Research Focus

Dr. Kumar’s research primarily revolves around advanced manufacturing processes, with a special emphasis on laser-based manufacturing techniques, inverse modeling, and optimization methodologies. His pioneering work in laser bending has paved the way for innovations in manufacturing industries, providing sustainable and efficient solutions.

In his M.Tech thesis, he delved into fiber laser welding, exploring its applications in different media (air and water). This study has had implications for industries where precision welding of delicate materials is critical, such as aerospace and electronics. Similarly, his Ph.D. research on single-pass laser bending addresses challenges in precision forming, offering optimization strategies that enhance material performance while minimizing waste. ⚖️

Dr. Kumar is also an advocate of sustainable manufacturing practices and explores methodologies that integrate eco-friendly processes without compromising on efficiency and output. His work embodies a vision of innovation that aligns with global sustainability goals. ♻️

Accolades and Recognition

Dr. Kumar’s contributions have garnered recognition in academic and professional circles. His exemplary academic performance during his M.Tech and Ph.D. earned him accolades from his mentors and peers alike. As a researcher, he has presented papers at esteemed national and international conferences, earning appreciation for his insightful analyses and robust methodologies. ⚡

Beyond academia, he has collaborated with industrial partners, translating his research findings into practical applications, further amplifying the impact of his work. 🛠️

Impact and Influence

Dr. Kumar’s work has significantly influenced the field of laser-based manufacturing and optimization techniques, inspiring researchers and practitioners alike. His ability to combine rigorous theoretical frameworks with real-world applications has established him as a thought leader in his domain. 🌍

As a mentor, he has guided numerous students, fostering a culture of innovation and inquiry. Many of his mentees have gone on to pursue advanced studies and careers in mechanical engineering, further extending his influence. His teaching and research contributions resonate not just within his institution but also across the broader academic community. 🎓

Legacy and Future Contributions

With a strong foundation and an unwavering commitment to excellence, Dr. Vikash Kumar continues to shape the future of mechanical engineering. His ongoing projects in modeling and simulation, advanced manufacturing systems, and sustainable practices hold promise for groundbreaking advancements in the field.

As an Assistant Professor at NIT Calicut, he envisions transforming the department into a hub of innovation, fostering collaborations with global researchers, and mentoring students to achieve academic and professional excellence. His dedication to research, teaching, and community engagement positions him as a role model for aspiring engineers and educators. ✨

Citations

A total of 152 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        152
  • h-index          17
  • i10-index       08

Notable Publications 

  • Title: Selection and Optimization of Process Parameters During Multi-Pass Laser Bending Process
    Authors: Nikhil, P., Kumar, V., Arun Babu, K.
    Journal: Optics and Laser Technology
    Year: 2025.
  • Title: Optimization of Battery Tab Interconnects by Micro-TIG Welding Using Simulated Annealing Algorithm and Response Surface Method
    Authors: Sai, M. B., Mondal, S. C., Kumar, V.
    Journal: Smart Innovation, Systems, and Technologies
    Year: 2023.
  • Title: Modeling and Optimization of Laser Tube Bending Process
    Authors: Kumar, V., Anthikapalli, B., Pal, B., Kuriachen, B.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Directed Energy Deposition of Ni-Based Hard-Facing Alloy
    Authors: Kumar, V., Shrivastava, A., Chakraborty, S. S., Mukherjee, S.
    Journal: Laser Applications in Manufacturing
    Year: 2023.
  • Title: Joining Techniques Like Welding in Lightweight Material Structures
    Authors: Kumar, V., Kumar, P., Das, A. K.
    Journal: Laser Applications in Manufacturing
    Year: 2023.

Vishwanath Kumar | Thermal engineering | Best Researcher Award

Posted on by ScienceFather

Mr. Vishwanath Kumar | Thermal engineering | Best Researcher Award

National Institute of Technology Silchar, Assam, India.

Author Profile

Early Academic Pursuits 📚

Vishwanath Kumar’s educational journey is a testament to his dedication and passion for engineering and research. His academic foundation began with his matriculation from Jesus and Mary Academy School, Darbhanga, where he achieved a solid score of 76.8%. Building on this, he completed his Intermediate education at DAV Public School, Bokaro, securing a commendable 74.4%, which demonstrated his strong academic potential.

Vishwanath’s deep interest in the sciences led him to pursue a Bachelor of Engineering (B.E.) in Mechanical Engineering from Bhilai Institute of Technology, Durg (CSVTU). Graduating in 2014 with an impressive CGPA of 8.68, he laid the groundwork for his future in the field of mechanical engineering. His undergraduate education ignited his curiosity in energy systems, prompting him to explore advanced studies in the field.

In his quest for knowledge and specialization, Vishwanath pursued a Master of Technology (M.Tech) in Thermal Engineering at the prestigious National Institute of Technology (NIT) Silchar. Graduating in 2016 with a CGPA of 8.95, Vishwanath’s academic prowess was evident, and he deepened his understanding of thermal systems and their applications. His educational background provided him with the solid grounding needed to tackle complex issues in solar energy and thermal engineering 🔥.

Professional Endeavors 💼

Vishwanath Kumar’s professional career has spanned across several institutions, where he has made significant contributions to both education and research. His journey began as a Lecturer at DPG Polytechnic College, Gurugram, Haryana, where he shared his knowledge of mechanical engineering with aspiring students. His role as a lecturer allowed him to engage with young minds and inspire them to pursue careers in engineering.

After his initial experience, Vishwanath advanced to an Assistant Professor position at Lingaya’s University, Faridabad, Haryana. Here, he continued to shape the minds of future engineers while conducting research on innovative technologies related to solar energy and mechanical systems. His experience in academia helped him develop a deeper understanding of the importance of practical applications of theoretical knowledge 🌱.

In addition to his teaching roles, Vishwanath also served as the Head of the Department (HOD) for the Mechanical Department at DPG Polytechnic College, Gurugram, Haryana. In this leadership role, he was responsible for overseeing the department’s academic activities, guiding faculty, and ensuring the quality of education provided to students. His leadership and management skills have contributed to the overall success and growth of the department 🏫.

Currently, Vishwanath is a Ph.D. research scholar at NIT Silchar, where he is focused on research related to solar energy and solar desalination. His research delves into sustainable energy solutions, particularly in the area of solar desalination, which is crucial for providing clean drinking water in water-scarce regions. This research is not only academically important but also addresses pressing global challenges related to water scarcity and renewable energy ⚡💧.

Contributions and Research Focus 🔍

Vishwanath Kumar’s primary research focus is in the areas of Solar Energy and Solar Desalination, two highly relevant fields in today’s world. As a Ph.D. scholar at NIT Silchar, he has delved deep into solar energy technologies, particularly exploring the applications of solar desalination for purifying saline water. Solar desalination holds immense promise for providing clean water using sustainable and renewable energy sources, especially in regions facing water shortages.

His research in solar energy includes the study of efficient solar thermal systems, solar collectors, and solar desalination units. Vishwanath aims to improve the performance of solar desalination systems to make them more cost-effective and efficient, thus contributing to global efforts for providing potable water in arid regions. His research aligns with global goals of promoting sustainability and renewable energy solutions 🌍.

Accolades and Recognition 🏆

Vishwanath Kumar’s hard work and dedication to both academics and research have not gone unnoticed. Throughout his academic journey, he has consistently demonstrated excellence, earning accolades for his outstanding performance. Notably, he qualified for the GATE (Graduate Aptitude Test in Engineering) in 2014 and 2018, which is a testament to his strong grasp of mechanical engineering principles and his potential as a future researcher and engineer.

His achievements during his M.Tech and research work have further solidified his reputation as a promising scholar in the field of solar energy. Vishwanath’s research has gained recognition in academic circles, and he has presented his work at several conferences, contributing to discussions on renewable energy and solar desalination 🌟.

Impact and Influence 🌍

Vishwanath Kumar’s impact extends far beyond his academic qualifications and research achievements. Through his teaching, he has shaped the careers of numerous students, guiding them to become proficient in mechanical engineering and sustainable energy solutions. His focus on solar energy, particularly solar desalination, has inspired many of his students to consider careers in renewable energy, contributing to the growing global demand for clean and sustainable solutions ⚡.

In his research endeavors, Vishwanath is actively working toward solving real-world problems, particularly in water-scarce regions. His work on solar desalination has the potential to revolutionize how communities in arid regions access clean water, and his focus on solar energy aligns with the global push for sustainable energy practices. By developing cost-effective and efficient solutions, Vishwanath’s contributions could play a key role in addressing the dual challenges of energy production and water scarcity 💧.

Legacy and Future Contributions 🔮

Looking ahead, Vishwanath Kumar’s legacy will be one of contributing innovative solutions to some of the most pressing challenges of our time. His work on solar desalination has the potential to leave a lasting impact on communities around the world by providing access to clean water through sustainable energy. As solar energy technologies continue to evolve, Vishwanath’s research will likely lead to more efficient and scalable solutions, making solar desalination an accessible and viable option for communities in need 🌞.

In the coming years, Vishwanath plans to further expand his research on solar energy and desalination, exploring new methods to enhance system performance and reduce costs. He also aims to collaborate with global experts and institutions to advance the use of renewable energy in solving water scarcity issues. His vision is to create technologies that not only provide clean water but also promote sustainability and energy efficiency, ensuring a better future for all 🌱.

Through his academic contributions, research endeavors, and leadership roles, Vishwanath Kumar has established himself as a forward-thinking educator and researcher. His future contributions will undoubtedly continue to impact the fields of renewable energy and water treatment, cementing his place as a key player in the global push for sustainability.

Notable Publications 

  • Title: Effects of temperature-dependent thermo-physical properties on hydrodynamic swirl decay in microtubes
    Authors: S. Pati, V. Kumar
    Journal: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of…
    Year: 2019.
  • Title: The Medium is the Message: Audio-Visual Communication Over Textual Communication-A Matter Of ‘Effectiveness’ In Communicating Conservation
    Authors: S. Pati, V. V. Kumar
    Journal: Global Media Journal: Indian Edition
    Volume: 15 (2)
    Year: 2023.
  • Title: Synthesis of advanced PANI-based conductive composites using methacrylate groups-based materials
    Authors: S. Pati, T. Yokozeki, V. Kumar, T. Goto, T. Takahashi
    Conference: 18th European Conference on Composite Materials, ECCM
    Year: 2020.
  • Title: An all polymeric lightning strike protection material for FRP composites
    Authors: V. Kumar, T. Yokozeki, T. Goto, T. Takahashi, S. Das
    Conference: 18th European Conference on Composite Materials, ECCM
    Year: 2019.
  • Title: Polyaniline/phenol-divinylbenzene resin for CFRP composite with enhanced electrical and mechanical properties
    Authors: Y. Zhou, V. Kumar, T. Yokozeki
    Conference: International Conference on Composite Materials (22nd: 2019: Melbourne, VIC…)
    Year: 2019.

BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Posted on by ScienceFather

Prof Dr. BALARAM KUNDU | Mechanical Engineering | Academic Excellence in Innovation Award

Jadavpur University, India

Author Profile

Early Academic Pursuits 📚

Dr. Balaram Kundu’s academic journey is a testament to his unwavering commitment to excellence in mechanical engineering. His foundational years were marked by exemplary achievements, beginning with his Bachelor of Engineering (Mechanical Engineering) from the prestigious Regional Engineering College Durgapur (now NIT Durgapur) in 1993, where he graduated with first-class honors, achieving a remarkable 70.5%.

Driven by his passion for thermal engineering, Dr. Kundu pursued his Master of Engineering (Thermal Engineering) at Bengal Engineering College (now IIEST Shibpur) in 1995, securing first-class distinction with an impressive 77.8%. This academic rigor set the stage for his doctoral studies, and in February 2000, he earned his Doctor of Philosophy (Ph.D.) in Engineering from the esteemed Indian Institute of Technology (IIT) Kharagpur, India. His doctoral research laid a robust foundation for his future contributions to thermal engineering and mechanical systems.

Professional Endeavors 🏢

Dr. Kundu’s career trajectory reflects his dedication to teaching, research, and academic leadership. Beginning in April 1998 as a Reader in Mechanical Engineering at Jadavpur University, he quickly established himself as a skilled educator and researcher. His teaching journey progressed as follows:

  • Lecturer (Senior Scale) at Jadavpur University (2003–2008), where he expanded his teaching portfolio and research collaborations.
  • Lecturer at Jalpaiguri Government Engineering College (2008–2011), where he honed his mentoring abilities and inspired young engineers.
  • Promoted to Associate Professor in 2011, he continued his impactful work at Jadavpur University until his promotion to Professor in 2014.

At Jadavpur University, Dr. Kundu has been instrumental in shaping the Department of Mechanical Engineering, fostering innovation in teaching and mentoring a generation of aspiring engineers.

Contributions and Research Focus 🔬

Dr. Kundu’s research interests center on thermal engineering, focusing on topics like heat transfer, thermodynamics, and energy efficiency. His work bridges the theoretical and practical aspects of mechanical engineering, offering solutions to complex thermal problems.

Key highlights of his research:

  • Pioneering Work on Thermal Systems: His investigations into advanced thermal systems have contributed to sustainable energy practices.
  • Publications and Collaborations: Dr. Kundu has authored numerous papers in reputed journals, collaborating with researchers worldwide to advance knowledge in mechanical engineering.
  • Education and Innovation: His expertise in heat transfer and thermodynamics has influenced curriculum development, making education more relevant to industrial applications.

Accolades and Recognition 🏆

Dr. Kundu’s excellence has earned him several accolades throughout his career:

  • Recognition as a leading academic in mechanical engineering.
  • Invitations to conferences as a speaker and panelist, showcasing his thought leadership.
  • Esteemed reviewer for top-tier journals, contributing to academic rigor in his field.

Impact and Influence 🌍

Dr. Kundu’s influence extends beyond the classroom. His contributions have shaped the academic and professional lives of students, many of whom hold prominent positions in academia and industry. By integrating research insights into teaching, he has ensured that his students are equipped with the latest knowledge and skills.

Additionally, his commitment to mentoring young researchers has fostered a culture of innovation at Jadavpur University. His research findings have informed policy-making and industrial practices, addressing critical challenges in energy efficiency and mechanical systems.

Legacy and Future Contributions 🌟

Dr. Kundu’s legacy lies in his dedication to advancing mechanical engineering through research, teaching, and mentorship. Looking forward, he aims to:

  • Expand his research into sustainable energy systems and emerging technologies in thermal engineering.
  • Develop interdisciplinary collaborations to address global challenges in energy and environmental sustainability.
  • Continue mentoring the next generation of engineers and researchers, leaving an indelible mark on academia and industry.

With a career spanning decades, Dr. Kundu’s commitment to knowledge and innovation makes him a luminary in his field. His journey inspires students and professionals alike, exemplifying the values of hard work, curiosity, and lifelong learning. 🌟

Citations

A total of 2,867 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        2,867
  • h-index          140
  • i10-index       34

Notable Publications 

  • Title: A review of applications of green nanofluids for performance improvement of solar collectors
    Authors: Dewanjee, D., Kundu, B.
    Journal: Renewable Energy
    Year: 2025.
  • Title: Two-Dimensional Analysis of Absorber Plates in Solar Collectors with a Nonlinear Plate Temperature at the Tube Section
    Authors: Mahakud, J., Kundu, B.
    Journal: Energies
    Year: 2024.
  • Title: Experimental and meta-heuristic optimization for the highest thermo-hydraulic performance of a solar air heater with a V-notch pattern of hemispherical protrusions on absorber surfaces
    Authors: Mahto, P.K., Kundu, B.
    Journal: International Communications in Heat and Mass Transfer
    Year: 2024.
  • Title: Parametric optimization of solar air heaters with dimples on absorber plates using metaheuristic approaches
    Authors: Mahto, P.K., Das, P.P., Diyaley, S., Kundu, B.
    Journal: Applied Thermal Engineering
    Year: 2024.
  • Title: A Review of Artificial Intelligence Methods in Predicting Thermophysical Properties of Nanofluids for Heat Transfer Applications
    Authors: Basu, A., Saha, A., Banerjee, S., Roy, P.C., Kundu, B.
    Journal: Energies
    Year: 2024.

Dinesh Kumar Saini | Thermal Engineering | Best Researcher Award

Posted on by ScienceFather

Mr. Dinesh Kumar Saini | Thermal Engineering | Best Researcher Award

National Institute of Technology, Kurukshetra, India

Author Profile

Early Academic Pursuits 🎓

Dinesh Kumar Saini’s academic journey reflects a consistent drive toward excellence in the field of mechanical engineering. His foundational education began with a Bachelor of Engineering (B.E.) in Mechanical Engineering at Sunderdeep College of Engineering and Technology, Ghaziabad, affiliated with Dr. A.P.J. Abdul Kalam Technical University, Lucknow. Graduating in 2015 with an impressive 81.16% (First Division), he demonstrated early on his aptitude for engineering concepts and problem-solving.

Motivated by a passion for thermal systems, Dinesh pursued a Master of Technology (M.Tech) in Thermal Engineering at the National Institute of Technology (NIT), Kurukshetra. His research during this period focused on the “Design and performance analysis of an ejector as an expansion device in vapor compression systems”, a topic that underscores his interest in innovative thermal technologies. Achieving a stellar 9.5 CGPA, he solidified his expertise and commitment to advancing energy systems.

Currently, Dinesh is pursuing a Doctor of Philosophy (Ph.D.) in Mechanical Engineering (Thermal) from NIT Kurukshetra. Since January 2021, he has been deeply engaged in experimental investigations of phase change materials (PCMs) for thermal energy storage systems. His research is driven by the need for sustainable and efficient energy solutions, placing him at the forefront of innovation in this critical domain.

Professional Endeavors 🏢

Dinesh’s professional journey is intricately tied to his academic pursuits, with a strong focus on applied research. His master’s thesis introduced him to experimental techniques and performance analysis, skills that he continues to employ in his doctoral work.

As a Senior Research Scholar at NIT Kurukshetra, Dinesh has contributed to the advancement of solar thermal energy storage systems and their application in solar water heating and space heating. His hands-on approach to understanding PCMs and their integration into thermal systems has provided valuable insights into energy efficiency and sustainability.

Contributions and Research Focus 🌞

Dinesh’s research revolves around solar thermal energy storage systems, with a particular emphasis on phase change materials (PCMs). These materials, known for their ability to store and release latent heat, are crucial for enhancing the efficiency of thermal systems.

His work addresses key challenges in the field, including:

  • Material selection: Identifying and testing PCMs that offer optimal thermal properties.
  • System integration: Developing methods to incorporate PCMs into solar water heating and space heating systems.
  • Performance optimization: Experimentally analyzing and improving the efficiency of thermal energy storage systems.

By bridging the gap between theoretical concepts and practical applications, Dinesh’s research contributes to the development of energy systems that are not only efficient but also environmentally sustainable.

Accolades and Recognition 🏅

Dinesh’s academic achievements are a reflection of his dedication and hard work. Graduating with distinction during both his undergraduate and postgraduate studies, he has consistently stood out among his peers. His 9.5 CGPA in his M.Tech program is a testament to his commitment to academic excellence.

His research contributions have also gained recognition within the scientific community. Through publications and conference presentations, Dinesh has shared his findings with researchers and professionals, earning accolades for his innovative approach to solving real-world energy challenges.

Impact and Influence 🌟

Dinesh’s work in thermal energy storage has a far-reaching impact on both the academic and industrial sectors. By improving the efficiency of solar thermal systems, his research supports the transition to renewable energy sources, aligning with global efforts to combat climate change.

As a Senior Research Scholar, he has also influenced the next generation of researchers through mentorship and collaboration. His ability to communicate complex concepts in an accessible manner has inspired many to explore the potential of sustainable energy technologies.

Legacy and Future Contributions 🚀

Looking ahead, Dinesh Kumar Saini aims to expand the scope of his research to include large-scale applications of thermal energy storage systems. His work on PCMs has the potential to revolutionize the way energy is stored and utilized, offering solutions that are both cost-effective and environmentally friendly.

In addition to his technical contributions, Dinesh is committed to fostering a culture of innovation and sustainability. By mentoring young researchers and engaging with the broader community, he aspires to leave a lasting legacy as a pioneer in solar thermal energy and phase change materials research.

In conclusion, Dinesh Kumar Saini’s journey is a shining example of how dedication to learning and innovation can drive meaningful change. His contributions to the field of mechanical engineering and energy storage are paving the way for a greener, more sustainable future. 🌱✨

Citations

A total of 16 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations        16
  • h-index           07
  • i10-index        02

Notable Publications 

  • Fabrication and Investigation of Stearic Acid-Based Thermal Battery with Water to Enhance the Heat Transfer Rate
    • Authors: Saini, D.K., Chandrashekara, M.
    • Journal: Journal of Energy Storage
    • Year: 2024.
  • Enhancing Paraffin Wax-Based Thermal Battery Performance with Water: Fabrication and Experimental Analysis
    • Authors: Saini, D.K., Chandrashekara, M.
    • Journal: International Communications in Heat and Mass Transfer
    • Year: 2024.
  • A Systematic Review of Thermal Energy Storage and Phase Change Materials
    • Authors: Saini, D.K., Chandrashekara, M.
    • Journal: NanoWorld Journal
    • Year: 2023.
  • Experimental Investigation of Stearic Acid in the Thermal Battery Comprising a Fin and Tube Heat Exchanger
    • Authors: Saini, D.K., Chandrashekara, M.
    • Journal: Evergreen
    • Year: 2023.
  • Optimized Refrigerant Flow Rate and Dimensions of the Ejector Employed in a Modified Ejector Vapor Compression System
    • Authors: Sharma, D., Sachdeva, G., Saini, D.K.
    • Journal: International Journal of Air-Conditioning and Refrigeration
    • Year: 2020.

Santhakumar.G | Engineering | Best Researcher Award

Posted on by ScienceFather

Prof. Santhakumar.G | Engineering | Best Researcher Award

Sri Krishna College of Technology, India

Author Profile

Early Academic Pursuits 🎓

Santhakumar.G’s academic journey has been marked by consistent excellence and a passion for learning. He laid the foundation of his career with a Bachelor of Engineering (B.E.) in Electronics and Communication Engineering (ECE) from Anna University, Chennai. Graduating in 2010 with a commendable 79% and earning a First Class with Distinction, his early academic achievements reflect a strong dedication to the field of ECE.Fueling his interest further, he pursued a Master of Engineering (M.E.) in Communication Systems at Kumaraguru College of Technology, Coimbatore, under Anna University. With an impressive CGPA of 8.88, he graduated in 2012, again with First Class with Distinction. Santhakumar.G’s academic pursuits exemplify his enthusiasm for understanding complex systems and his drive for academic excellence. In July 2021, he embarked on his Ph.D. journey at Anna University, Chennai, specializing in cutting-edge topics to push the boundaries of knowledge in electromagnetic fields and microwave engineering.

Professional Endeavors 🌟

Santhakumar.G has accumulated over 12 years and 4 months of rich teaching and research experience. His professional journey began as an Assistant Professor in the Department of ECE at Shree Venkateshwara Hi-Tech Engineering College, Erode, Tamil Nadu, where he served from June 2012 to May 2014. This role allowed him to refine his pedagogical skills while mentoring budding engineers.In June 2014, he joined Sri Krishna College of Technology, Coimbatore, as an Assistant Professor in the Department of ECE. Here, he has been pivotal in shaping the curriculum, delivering impactful lectures, and nurturing students to excel in their academic and professional lives. His expertise spans a range of technical domains, including Electromagnetic Fields, Transmission Lines and Waveguides, Antennas and Wave Propagation, and Microwave Engineering.

Contributions and Research Focus 🔬

Santhakumar.G’s research interests lie at the intersection of electromagnetic theory and modern communication systems. He has demonstrated proficiency in software tools such as HFSS, FEKO, and CST, which are instrumental in simulating and analyzing high-frequency systems. His technical expertise extends to Multisim, LabVIEW, and MATLAB, enabling him to contribute effectively to projects requiring multidisciplinary skills.He is actively engaged in innovative research, particularly in areas like wave propagation and antenna design. His pursuit of a Ph.D. further solidifies his commitment to advancing the field. By staying abreast of the latest developments, he ensures that his work remains relevant and impactful.

Accolades and Recognition 🏆

Throughout his career, Santhakumar.G has been recognized for his unwavering commitment to education and research. His students and colleagues regard him as an inspiring mentor who bridges theoretical concepts with practical applications. While details of awards and accolades are yet to be disclosed, his professional journey itself stands as a testament to his excellence and perseverance.

Impact and Influence 🌍

Santhakumar.G’s influence extends beyond the classroom. His dedication to guiding students has resulted in several of his mentees achieving remarkable success in their careers. His expertise in programming languages such as C and C++ and his in-depth understanding of high-frequency systems empower his students to tackle real-world challenges effectively.Additionally, his engagement with modern tools and simulators ensures that students are equipped with industry-relevant skills. By fostering an environment of curiosity and innovation, he has made a lasting impact on the academic and professional trajectories of his students.

Legacy and Future Contributions 🌱

Santhakumar.G envisions a future where his work contributes significantly to the development of advanced communication systems and electromagnetic technologies. His ongoing Ph.D. research promises to open new avenues in these domains, furthering our understanding of wave propagation and microwave systems.His legacy lies in his ability to inspire and empower the next generation of engineers. By combining his technical acumen with a passion for teaching, he is set to leave an indelible mark on academia and industry. With his continued focus on innovation and mentorship, Santhakumar.G is poised to shape the future of engineering education and research, leaving behind a legacy characterized by excellence and impact.🌟 Santhakumar.G’s journey exemplifies the power of dedication, passion, and continuous learning in shaping a meaningful and impactful career. 🌟

Citations

A total of 26 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations         26
  • h-index           22
  • i10-index        04

Notable Publications 

  • Title: Performance Analysis of Microstrip Patch Antenna for Wireless Communication Systems
    Authors: Alagarsamy, M., Govindasamy, S., Suriyan, K., Mariappan, S., Krishnan, J.C.R.
    Journal: International Journal of Reconfigurable and Embedded Systems
    Year: 2024.
  • Title: MULTI-TASK Crow Swarm-Intelligent Algorithm for Enhancing Spectrum Efficiency and Energy Conservation in Cognitive Radio Ad-Hoc Networking
    Authors: Govindasamy, S., Ramudu, K., Suriyakrishnaan, K., Tanguturi, R.C., Singh, M.
    Journal: Measurement: Sensors
    Year: 2024.
  • Title: Design and Development of Dual Band Millimeter Wave Substrate Integrated Waveguide Antenna Array
    Authors: Santhakumar, G., Muthukumar, R.
    Journal: Measurement Science Review
    Year: 2024.
  • Title: Development of Millimeter Wave Communication Using Dielectric Resonator Antennas Using Substrate Technology
    Authors: Santhakumar, G., Muthukumar, R.
    Journal: 2024 2nd World Conference on Communication and Computing (WCONF 2024)
    Year: 2024.
  • Title: Enhancing Sustainability and Energy Efficiency in Wireless Communication Systems Through Integrated Renewable-Powered Antenna Design
    Authors: Santhakumar, G., Muthukumar, R., Ramkumar Prabhu, M., Muthu Pandian, P., Bhoopathy, V.
    Journal: Journal of Environmental Protection and Ecology
    Year: 2024.

Dhananjay R. Mishra | Engineering | Excellence in Applied Research Award

Posted on by ScienceFather

Dhananjay R. Mishra - Excellence in Applied Research Award - Award Winner 2023🏆

Dr. Dhananjay R. Mishra : Engineering

Congratulations, Dr. Dhananjay R. Mishra, on winning the esteemed Excellence in Applied Research Award from Research! Your dedication, innovative research, and scholarly contributions have truly made a significant impact in your field. Your commitment to advancing knowledge and pushing the boundaries of research is commendable. Here's to your continued success in shaping the future of academia and making invaluable contributions to your field. Well done!

He is currently an Associate Professor in the Mechanical Engineering Department at Jaypee University of Engineering & Technology (JUET) in Guna, Madhya Pradesh, India. With an extensive career spanning various academic roles, he has been associated with JUET since July 2012. His expertise lies in the domain of Mechanical Engineering, particularly in renewable energy applications, specializing in solar thermal technologies and novel solar distillation techniques. His present role involves active teaching, guiding research endeavors, and overseeing academic and administrative responsibilities within the Mechanical Engineering Department. Moreover, he has made significant contributions as an editor and reviewer for esteemed international journals in the field of engineering and energy. His current focus encompasses sustainable energy solutions and advancements in renewable technologies, emphasizing solar distillation, heat transfer mechanisms, and solar water desalination.

Professional Profiles:

Early Academic Pursuits :

He embarked on his academic journey with a Bachelor's in Mechanical Engineering from Babasaheb Naik College of Engineering, followed by a Master's in Production Engineering from Bhilai Institute of Technology. He attained his Ph.D. in Mechanical Engineering from the National Institute of Technology, Raipur, delving into "Simulation of Heat Transfer between Structures and Ground and Performance of Novel Solar Stills."

Professional Endeavors :

His professional career spans prestigious institutions such as Jaypee University of Engineering & Technology, Guna, where he presently serves as an Associate Professor. His tenure includes roles as an Assistant Professor and Senior Lecturer, contributing significantly to Mechanical Engineering departments and academic administration. He also gained industry experience as an Assistant Production Manager at Suprabha Industries Pvt. Ltd.

Contributions and Research Focus in Engineering :

His extensive contributions are notable in the field of renewable energy, specifically focusing on solar thermal applications, desalination, and optimizing novel solar distillation techniques. He actively supervises Ph.D. and M.Tech. students, advancing research on solar water desalination, machining processes, and heat and mass transfer in solar stills.

Accolades and Recognition :

As Editor and Associate Editor of reputable international journals, Dr. Mishra influences academic discourse. His peer-reviewed journal reviews, numerous invited talks at international conferences, and patents granted/published in the realm of solar distillation and related technologies illustrate his impactful contributions.

Impact and Influence :

His work significantly impacts the fields of renewable energy and engineering, evident through his patented inventions, research publications, and guidance provided to Ph.D. and M.Tech. scholars. His invited talks and collaborations with academia and industry underscore his influence on global discourse in renewable energy technologies.

Legacy and Future Contributions :

His legacy lies in his commitment to advancing renewable energy solutions. His patents and ongoing research in solar distillation and other related technologies portray a promising future for innovative and sustainable approaches to water desalination and renewable energy utilization. His mentorship and guidance further ensure a lasting impact on future researchers and academics in the field.

Notable Publications :

Citations:

A total of  1998 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations    1021    977
  • h-index       19       17
  • i10-index    31       31

Dibya Prakash Jena | Engineering | Best Researcher Award

Posted on by ScienceFather

Dibya Prakash Jena | Best Researcher Award Winner 2023🏆

Dr. Dibya Prakash Jena : Engineering

Congratulations, Dr Dibya Prakash Jena, on winning the esteemed Best Researcher Award from Research! Your dedication, innovative research, and scholarly contributions have truly made a significant impact in your field. Your commitment to advancing knowledge and pushing the boundaries of research is commendable. Here's to your continued success in shaping the future of academia and making invaluable contributions to your field. Well done!

He holds the position of Assistant Professor at the Department of Industrial Design in NIT Rourkela. With a robust professional tenure spanning over 16 years, he boasts nearly equal periods of dedicated service in both industrial and academic domains. His career trajectory showcases eight years of invaluable industry experience, contributing his expertise to renowned companies such as John Deere Technology Center, Robert Bosch, and EICHER Engineering Solutions, where he specialized in automation, LabVIEW architecture, and product development. Transitioning into academia, he has spent the past eight years at NIT Rourkela and previously at BITS Pilani, Hyderabad Campus, exhibiting his commitment to teaching and research in mechanical sciences, notably industrial design and its intersection with acoustic and vibration-based condition monitoring. His extensive experience reflects a balanced blend of industry insights and academic prowess, reinforcing his role as an adept educator and a research-driven academician in the field of industrial design and engineering.

Professional Profiles:

Early Academic Pursuits :

His academic journey commenced with a Bachelor's in Mechanical Engineering specializing in Manufacturing from Sant Longowal Institute of Engineering Technology (SLIET) in 2004, followed by a Master's in Manufacturing Management from Birla Institute of Technology and Sciences (BITS) Pilani in 2011. He further pursued a Doctorate from the School of Mechanical Sciences at the Indian Institute of Technology (IIT), Bhubaneswar, completing his thesis titled "Development of Active and Passive Filters for Improving Quality of Acoustic and Vibration based Condition Monitoring" under the guidance of Prof. S.N. Panigrahi in 2014, securing a CGPA of 8.25.

Professional Endeavors :

He has amassed over 16 years of diverse experience, spanning both academia and industry. His academic journey commenced with a brief stint as an Assistant Professor at BITS Pilani, Hyderabad Campus, before he assumed his current role as an Assistant Professor in the Department of Industrial Design at the National Institute of Technology (NIT), Rourkela, where he has dedicatedly contributed to teaching and research for more than six years. His industrial experience encompasses pivotal roles in esteemed companies such as John Deere Technology Center, Robert Bosch, and EICHER Engineering Solutions, focusing on automation, LabVIEW architecture, and product development.

Contributions and Research Focus :

His research interests gravitate towards several significant domains, notably artificial metamaterials, condition monitoring, and the design of composite liners for industrial noise and vibration control. His contributions include seminal research in the development of active and passive filters, broad-band sonic crystal and metamaterial, and underwater acoustic composite metamaterial, emphasizing their applications in enhancing acoustic and vibration-based condition monitoring techniques.

Accolades and Recognition :

His impactful research has garnered substantial recognition through numerous sponsored research project grants from esteemed organizations like Naval Research Board, Indian Rubber Manufacturers Research Association, ISRO, DRDO Laboratory, and collaborations with international entities such as the University of Bologna and the University of Technology Sydney. These accolades underscore his significant contributions to advancing knowledge and technological innovation.

Impact and Influence :

His contributions in the realms of metamaterials, acoustic insulation, and underwater acoustics are poised to have a far-reaching impact on diverse sectors, particularly in revolutionizing noise and vibration control technologies, thereby influencing the advancement of condition monitoring systems in industries.

Legacy and Future Contributions :

With an extensive track record of sponsored research projects, His legacy lies in the pioneering work towards enhancing industrial processes, aligning with the "Make in India" initiative, and fortifying the realm of artificial metamaterials. His future contributions are anticipated to continue spearheading groundbreaking research endeavors aimed at technological advancements in noise and vibration control, furthering India's prowess in innovation and industrial excellence.

Notable Publications :

Citations:

A total of  1205 citations for his publications, demonstrating the impact and recognition of his research within the academic community.

  • Citations    680     525
  • h-index       14       13
  • i10-index   18       16

Sheeba Angel | Engineering | Best Researcher Award

Posted on by ScienceFather

Sheeba Angel | Best Researcher Award Winner 2023🏆

Ms. A. Sheeba Angel : Engineering

Ms. A. Sheeba Angel  is serving as a Junior Project Fellow at AICRP-7 SFRESPE(CAMPA).

Congratulations, Ms. A. Sheeba Angel, on winning the esteemed Best Researcher Award from Research! Your dedication, innovative research, and scholarly contributions have truly made a significant impact in your field. Your commitment to advancing knowledge and pushing the boundaries of research is commendable. Here's to your continued success in shaping the future of academia and making invaluable contributions to your field. Well done!

She is serving as a Junior Project Fellow at AICRP-7 SFRESPE(CAMPA), an external funded project aimed at assessing and monitoring invasive alien plant species in India and formulating strategies for their management. In this role, She continues to leverage her four years of research experience and expertise in embedded systems and disaster management. Her dedication to advancing knowledge and addressing critical issues in urban scenarios through intelligent techniques is evident in her ongoing commitment to the project. Her current role underscores her continuous contribution to the field of research, emphasizing her dedication to exploring innovative technological applications and contributing to the betterment of environmental sustainability and disaster preparedness.

Professional Profiles:

Early Academic Pursuits :

She embarked on her academic journey with a Bachelor's in Electronics and Communication Engineering from Jeppiaar Institute of Technology, securing an impressive 8.42 CGPA in 2015. She further pursued a Master of Engineering (M.E.) in VLSI Design from Sri Sivasubramanya Nadar College of Engineering in 2017, excelling with an outstanding 8.91 CGPA. Subsequently, She delved into her Ph.D. journey in the Faculty of Information & Communication Engineering at Anna University, where she submitted her thesis in 2023.

Professional Endeavors :

With a solid four-year tenure in research, She has proven her prowess. She currently holds the role of Junior Project Fellow at AICRP-7 SFRESPE(CAMPA), an External Funded Project focused on assessing and monitoring invasive alien plant species in India and formulating management strategies. She previously served as an SSN-JRF (Ph.D. Full Time) at Sri Sivasubramanya Nadar College of Engineering from February 2018 to January 2021, marking her initial foray into the research landscape.

Contributions and Research Focus in  :

She Angel A's research largely revolves around embedded systems, mathematical modeling, and disaster management in urban scenarios. Noteworthy among her academic projects is her Ph.D. thesis on "Design of Intelligent Techniques for Disaster Management in the Urban Scenario," showcasing her dedication to addressing critical issues through technological innovation.

Accolades and Recognition :

Her contributions are documented in various journal publications, including reputable platforms like Elsevier and IEEE, alongside commendable presentations in conferences such as the IEEE Sponsored Asian Conference on Innovation in Technology (ASIANCON) and the Sixth International Conference on Computation of Power, Energy, Information, and Communication. She holds several publications, including those indexed in Science Citation Index, Scopus, and IEEE journals.

Impact and Influence :

Through her prolific research output and conference presentations, She has significantly contributed to the academic discourse, particularly in the domains of emergency evacuation systems, fire risk assessment, and autonomous indoor navigation robots, exhibiting a potential influence on advancing research methodologies in disaster management and embedded systems.

Legacy and Future Contributions :

Her dedication to innovative research in disaster management, coupled with her expertise in embedded systems, promises a lasting legacy in academia. Her future contributions are anticipated to continue pushing the boundaries of technological applications in disaster preparedness and urban safety, leaving an indelible mark in research and fostering societal resilience.

Notable Publications :